5
INSTALLATION/SETUP
INSTALLATION/SETUP
Remote Control
Press the latch to remove the cover of the battery compartment on the back of the remote
control and insert the two AAA batteries (included) as indicated on the unit.
Once the DVB-T LCD Converter/Tuner is ready for operation, the following controls and
commands can be operated remotely.
1
7
8
6
2
4
3
5
9
10
11
12
15
13
18
17
19
20
21
14
16
1 Switches the DVB-T between
Operation and Standby modes.
20-9 on the numeric keypad
select channels and specic
menu options.
3Displays the menu on screen or
returns to the previous menu
from a sub-menu.
4Displays the electronic program
guide (EPG), if available.
5Changes to the next higher
channel in Viewing mode; moves
the cursor up in Menu mode.
6Raises the volume in Viewing
mode; raises the volume setting
in Menu mode.
7Changes to the next lower
channel in Viewing mode; moves
the cursor down in Menu mode.
8Returns to the previous menu
or screen.
9 Shows thumbnail previews of up
to 9 programs.
10 FAV displays the list of favorite
channels; FAV+ and FAV- move
up and down the on-screen
display.
11 Selects the Video Output mode.
12 Selects the TV/Radio mode.
13 Enables/disables the audio.
14 Moves to the last channel being
viewed/listened to.
15 Displays the program information
box on screen.
16 Conrms choices/selections
highlighted on the menu.
17 Lowers the volume in Viewing
mode; lowers the volume setting
in Menu mode.
18 Shows transmitted teletext, if available.
19 Sets the output for the speaker(s).
20 Freezes the picture currently on screen.
21 Selects PAL, NTSC or Auto.
