MM65
5
EN
Wireless net audio chat
• Connect the emitter audio cable into the audio out socket of the
PC, then insert one end of the audio cable (Optional) into the
microphone socket (MIC) on the emitter, and insert the other end
into the microphone in socket of the PC (see Fig.2)
• Turn on the power switch of the emitter, then the indicator go on
well, put the out-built MIC forward yourself and keep away with
the distance of 0.5M (see Fig.2).
• Open your chat tool and turn the switch to the“audio chat” posi-
tion, turn on the receiver then the indicator of the headphone go
on well. Adjust the volume to the suitable position, then headpho-
ne can receive the sound via the SKYPE/MSN/QQ from your friends
in the other end.
Wireless Monitoring
Place the emitter near baby and old people etc. Put the out-built Micro
phone forward monitor.
• Turn the power switch of the emitter to “MONITOR”the indicator
bright.
• Turn the power switch of the receiver (ON/OFF) the indicator
bright. Press the “RESET”, then the“SCAN”button, the sound of the
monitor can be heard by receiver.
Listen to the radio
The receiver can be used separately as an FM radio. Turn on the receiver,
press the “RESET”once, then press the “SCAN”key in turn to search a higher
range and lock one radio channel; when the highest range is reached, press
“RESET”key, and the frequency returns to the lowest range. Press “SCAN”
key again, and the receiver will search the radio channels from the low
range again.
