Marmitek EASYTOUCH 35 - Bedienungsanleitung

ASYTOUCH

EASYTOUCH35

OWNER’S MANUAL 4

BETRIEBSANLEITUNG 23

MODE D’EMPLOI 42

GEBRUIKSAANWIJZING 61

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 1

2MARMITEK

EASYTOUCH35

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 2

3EASYTOUCH 35

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 3

4MARMITEK

Contents

1. Safety Warnings __________________________________________________________4

2. Introduction _____________________________________________________________5

3. Installing the batteries ____________________________________________________6

4. Description of the ET35 "rubber" keys _______________________________________6

5. Description of the ET35 "Touchscreen" keys __________________________________7

6. Programming the EasyTouch35 ____________________________________________9

Method A: Programming using the Brand Search method_______________________9

Method B: Programming using the 3 Digit Code Tables________________________10

Method C: Programming using the Manual Code Search-method _______________11

7. Identifying codes found using the search procedures __________________________12

8. Programming a Macro____________________________________________________12

9. Channel toggle key ______________________________________________________14

10. Setting key labels ________________________________________________________15

11. Code learning___________________________________________________________16

12. Marmitek X-10 Home Automation _________________________________________17

12.1. Changing the home automation House Code ___________________________18

12.2. Programming the Home Automation IR/RF mode ________________________18

13. Extra functions __________________________________________________________20

14. Problems and troubleshooting ____________________________________________22

1 Safety warnings

• To prevent short circuits, this product should only be used inside and only in dry

spaces. Do not expose the components to rain or moisture. Do not use the product

close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or

bright light sources.

• Do not open the product: the device contains live parts. The product should only be

repaired or serviced by a qualified repairman

• In case of improper usage or if you have opened, altered and repaired the product

yourself, all guarantees expire. Marmitek does not accept responsibility in the case of

improper usage of the product or when the product is used for purposes other than

specified. Marmitek does not accept responsibility for additional damage other than

covered by the legal product responsibility.

• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical

waste. Never use old and new batteries or different types of batteries together.

Remove the batteries when you are not using the system for a longer period of time.

Check the polarity (+/-) of the batteries when inserting them in the product. Wrong

positioning can cause an explosion.

• Do not press too hard on the Touchscreen glass.

Follow the extra safety measures that can found in various places in the user guide. If you

have any questions that are not covered by this user guide, please visit our web site at

www.marmitek.com

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 4

5EASYTOUCH 35

2 Introduction

The EASYTOUCHT35 (ET35) is designed to control up to 8 devices (TV, VCR, CD, SAT, CBL,

DVD, AUDIO, Marmitek X-10 Home Control). The Marmitek X-10 Home Control key can

be used to control lighting and appliances.

To allow direct control of all these appliances, in a convenient way, the ET35 has a

Touchscreen. The Touchscreen will only display the functions for controlling your specific

equipment.

The ET35 has unique features, combined with a big storage capacity, such as:

• "Macro" option: a total number of 20 key strokes can be stored under each of the

9 available Macro keys

• code learning, up to 40 keys per mode

• channel scan/search function

• video plus / show-view key

• All power off feature: to switch off all modes in 2 presses

• TV Volume/ Mute, whatever the last mode was selected

• Channel toggle key

• Customising of the screen, using a predefined list of symbols, according to your

specific needs

• RF transmission to control your appliances through walls and ceilings (PowerMid

Receiver required, sold separately).

• Marmitek X10 key, which will enable you to control lamps and electrical appliances

from a distance. For controlling your lamps or appliances, you will need additional

home control. Visit www.marmitek.com for more information.

The ET35 contains a library of codes that are pre-programmed into the remote

control. This library covers nearly all the audio video products on the market today.

To make it easy for you to find the right code for your audio video appliance, we advise to

use the CODE SEARCH feature.

Home Control: control all electrical appliances with one remote control

The Marmitek remote controls have two transmitters: an infrared (IR) transmitter and a

radio frequency (RF) transmitter. This offers you the possibility to operate practically every-

thing electrical. You can operate your TV, video etc. with the infrared (IR) technology. The

X-10 radio frequency (RF) technology makes it possible to operate lights and appliances

from anywhere in your home. There are countless possible home applications for the

Marmitek X-10 protocol.

Here are some examples of the Marmitek X-10 Home Control:

• Dim the lights and switch them on and off while watching TV.

• Turn the coffee machine on from your bedroom when you wake up in the morning.

• Turn your lights on at night to scare off intruders when you hear noises.

• Switch on your electric blanket before the movie ends, so that you can enjoy a warm

bed once the movie is finished.

• Switch everything off when you go to bed with a single press of a button.

Read more about the Marmitek Home Control Modules in the grey section in chapter 12

on page 19.

ENGLISH

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 5

6MARMITEK

3 Installing the batteries

1. Open the cover on the back of the ET35

2. Insert 4 batteries (AAA size alkaline). Make sure the batteries are the same brand and

are NEW and observe polarities indicated inside the battery compartment.

3. All the user programmed parameters will be retained indefinitely during battery

replacement

4. Remove the plastic protection foil from the Touchscreen.

4 Description of the ET35 "rubber" keys

The Active Source Indicator

Every time a button on the touchscreen is pressed, the EasyTouch 35 will indicate which

mode is active at that moment. This Active Source Indicator enables you to see which

mode the remote control is set to at that time.

You do not have to change to the relevant mode in order to operate the volume and

Mute buttons directly from the VCR, DVD or SAT mode. These devices do not have any

volume control themselves and the EasyTouch 35 is programmed to automatically switch

from, for example, VCR mode to TV mode.

1: LED: Turns on whenever a rubber key or a Touchscreen key is pressed and indicates

when commands are being transmitted.

2: TV, VCR, CD, SAT, CBL, DVD, AUDIO, Marmitek X-10 Home Automation

mode:

To select the appliance you wish to control.

The Marmitek X-10 Home Control key allows you to control any lights or

appliances connected to Home Control (Marmitek X10) modules or to program

and control any kind of device such as a TV, satellite receiver, video recorder or DVD

player. By default this key is pre-programmed to control home control modules.

3: POWER: to switch off the last selected appliance

mode: Turns All Lights on.

4: VOL + / -: to control the volume

mode: brightens and dims the selected Home Control Module.

5: MACRO: to launch a macro (see chapter 10)

6: SET UP: to set the remote control for the appliance you wish to control. Allows the

access to secondary functions:

• Press and release the Setup key (A letter S appears on the top right hand

corner of the Touchscreen)

• Press the desired secondary function key (the "S" is turned off).

7: MUTE: to turn on and off the sound

mode: turns All Home Control modules off.

8: CHAN +/-: to select the next or the previous channel

mode: turns on or off the selected home automation module.

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 6

7EASYTOUCH 35

9: TELETEXT ON: to display Teletext

10: TELETEXT OFF: to turn off Teletext

11: Rew