Marmitek X-10 Bedienungsanleitung

Marmitek X-10

ABX1

Gebruiksaanwijzing 5

User Guide 19

ABX1 Learning RF

Universal Remote 8in1

Button layout

17 - 22

General Security Note

Attention:

For carefree and safe use of this product, please read this

manual and safety information carefully and follow the

instructions. Technical manipulation of the product or any

changes to the product are forbidden, due to security and

approval issues. Please take care to set up the device

correctly - consult your user guide. Children should use the

device only under adult supervision.

Important: the Marmitek X-10 remote control must be used

according the instructions in this manual and is not suitable for

other purposes.

Avoid the following

• strong mechanical wear and tear

• high temperature

• strong vibrations

• high humidity

Please also respect the additional security notes in the

various user guide chapters. To ensure correct set up please

read the manual and security notes carefully.

Battery install and change

The device may only be used with 2 alkaline batteries -

never try to connect to another power supply. When

inserting batteries be sure the right polarity is used. Remove

the batteries when the device is not used for a longer period.

Make sure that the batteries are not short circuited and are

not disposed in fire (danger of explosion). Batteries do not

belong in children hands. Don't let batteries lay around

openly - they might be swallowed by children or animals. If

this happens see a doctor immediately.

isposal of batteries:

Batteries are special waste and do not belong in general

household waste disposal. Leaking or damaged batteries

can upon contact with skin cause burning or acid damage -

if necessary use suitable gloves.

Please dispose of batteries in accordance with local bylaws.

Contents

1. Introduction

2. Insert the batteries

3. Function of the remote's buttons

4. Programming

4.1 Marmitek X-10 Automation Contro

4.2 Manua code entry

4.3 Automatic code search for some we -known brands

4.4 Automatic code search for a brands

4.5 Manua code search

4.6 Learning codes

4.7 Identifying codes found

4.8 Defau t Vo ume Contro for sate ite

4.9 Home Theatre Macro Feature

5. Troubleshooting

English

Quick start guide

1) Put the batteries in

1. Open the cover on the back of the 8 in 1 Universal

Remote Control

2. Insert 2 batteries ( alkaline). Make sure the batteries

are NEW.

2) Program your 8 in 1 Universal Remote Control

1. Turn on the equipment that you wish to control (TV, VCR,

etc).

2. The UX key allows you to program and control any

equipment such as TV, VCR, Dx

3. Take the code book supplied with the 8 in 1 Universal

Remote Control and find the brand of the equipment you

wish to control. E.g. if you have a Thomson TV look for

Thomson under the TV section.

4. Press and hold on the key marked SETU (8) until the

LED (2) stays permanently on. This takes about 3 seconds.

Release the SETU key.

5. Press and release the TV, VCR, CBL, DVD, etc. in

accordance with the appliance you wish to control.

6. From the code book take the first number corresponding

to your equipment and enter the number by pressing the 0-9

key pad (9). Each time you press a key the red LED (2) will

flash.

7. If the number is correctly entered the LED will turn off. If

the number is incorrect then the LED will flash fast. If

incorrect you will need to restart at 4.

Press theXOWER key (1) . If your equipment switches off

you have found the right code. If it does not switch off, you

will need to restart from 4.

Sometimes there are severa codes that have simi ar

features. If you find that your 8 in 1 Universa Remote

Contro does not work for some functions, you may need to

try another code.

1. Introduction

The Marmitek X-10 remote control is designed to control up

to 8 devices: TV, VCR, CBL (decoder, set top box), DVD, CD,

S T (satellite receiver), or any other device. The Marmitek X-

10 remote contains a library of codes that are

preprogrammed into the remote control. This library covers

nearly all the audio video products on the market today. The

codes have to be

programmed once before use. This can be done in different

ways:

a. Manual entry of one of the codes displayed under the

related brand and type of equipment in the attached code

book (see 4.1)

b. utomatic code search for some well-known brands (4.2)

c. utomatic code search for all brands (4.3)

d. Manual search through all codes (4.4)

Marmitek X-10 Automation: control all electrical appliances

with one remote control

The Marmitek X-10 Remote has two transmitters: an infrared

(IR) transmitter and a radio frequency (RF) transmitter. This

allows you to operate practically anything. You can operate

your TV, video etc. with the infrared (IR) technology. The

Marmitek X-10 radio frequency (RF) technology makes it

possible to operate lights and appliances from anywhere in

the home.

Here are some examples of the uses of the Marmitek X-10

utomation feature:

• Dim the lights and switch them on and off while

watching TV.

• Turn the coffee machine on from your bedroom when you

wake up in the morning.

• Turn your lights on at night to scare off intruders when

you hear noises.

• Switch on your electric blanket before the movie ends, so

you can enjoy a warm bed once the movie is finished.

• Switch everything off with a single press of a button

when you go to bed.

2. Insert the batteries (always use new AAA alkaline

batteries).

1. Open the cover on the back of the Marmitek X-10 Remote.

2. Insert 2 alkaline batteries, verify that they are placed

correctly with the + on the battery in the same position as

marked inside the battery compartment.

3. Close the battery compartment carefully.

English

3. Function of the remote's buttons

[1]XPOWER (On/Off)

llows you to switch off the last selected appliance. Some

appliances can also be switched on with this button.

[2] LE indicator

The indicator light flashes when the remote is operating or

lights continuously while you are programming the remote.

[3] TV, VCR, CBL, V , AU IO, VR, SAT, Marmitek X-10

These keys allow you to select the appliance you wish to

control.

[4] _MUTE

llows you to turn on/off the sound. You can control the

"Mute" function of your TV even when you are in VCR, DVD

or S T mode. No need to select the TV mode.

[5] CHAN +/- or PROG +/-

Select the next or the previous channel of your TV or S T.

In DVD mode: next or previous chapter.

[6] VOLUME +/-

llows you to control the volume. You can control the

volume of your TV even when you are in VCR, DVD or S T

mode. No need to select the TV mode.

[7] INFO

Displays on screen information of the selected appliance

(when available).

[8] SETUP

llows you to program your remote before the first use. It

also allows you to access to secondary functions of certain

/V appliances (Shift). Press the SETUP key followed by the

function key you desire.

[9] Numeric keys 0 - 9

Work the same way as your original remote.

[10] AV

Selection of an external source (SC RT input).

[11] -/--

In connection with the numeric keys, this button allows you

with some equipment to select directly channels higher than

9. If you are in programming mode - automatic code search

you can confirm the code.

[12] Menu Menu On

[13] Exit Menu OFF

[14] OK Confirms menu selection.

[15] Navigation keys

Up, Down, Right, Left. llows you to navigate into the menu

(TV, DVD, etc).

[16] Teletext

ÆTeletext ON: Start/stop Teletext / Fasttext.

#Teletext OFF: Stop Teletext / Fasttext.

ËTeletext

Hold: Stop page change in Teletext / Fasttext mode.

ÊTeletext Mix: llows you to mix the Teletext / Fasttext and

the picture of the selected channel.

[17] 5REW (rewind)

In VCR, DVD or CD mode: This button works the same way

as in your origina remote.

IN TV mode: Co oured key (Red), contro of videotext or

specia equipment functions.

[18] 4FF (fast forward)

In VCR, DVD or CD mode: This button works the same way

as in your origina remote.

IN TV mode: Co oured key (B ue), contro of fasttext or

specia equipment functions.

[19] PLAY

In VCR, DVD or CD mode: This button works the same way

as in your origina remote.

IN TV mode: Co oured key (Ye ow), contro of fasttext or

specia equipment functions.

[20] 2STOP

In VCR, DVD or CD mode: This button works the same way

as in your origina remote.

IN TV mode: Co oured key (Green), contro of fasttext or

specia equipment functions.

[21] 8REC (record)

This key works the same way as the one on your origina

remote for your VCR. In order to avoid a mistake you have

to press this key twice to activate this feature.

[22] 3PAUSE

In VCR, DVD or CD mode: This button works the same way

as in your origina remote.

IN TV mode: Co oured key (Magenta), contro of fasttext or

specia equipment functions.

[23] SHOWVIEW

You can use the ShowView or VideoPlus function of your

video recorder with this button (if your video recorder

supports this function). If your video does not support this

function, the button can give access to the timer function or

the menu of your video recorder. When the ShowView/V+

button is used in other modes than the VCR mode (TV, CBL,

S T, UDIO), this button is often used for the Scan function.

For example, in TV mode you can change channels or when

listening to a CD you can only listen to the intros. fter 3

seconds, the button selects the following channel or song.

Press any button to stop the Scan function. The Scan

function will automatically stop after 2 minutes.

[24] LEARN

Programming button for learning the functions of your

original remote control. See chapter 4.5, Learning codes, for

information about programming these codes.

[25] MACRO, M1, M2, M3

Macro buttons. With these buttons you can execute a series

of pre-programmed commands with one press of a button.

First press the M CRO button. Then press the M1, M2 or

M3 button to activate the relevant macro. See chapter 4.7 for

more information.

[26] L1, L2, L3, L4

Extra buttons for learning the functions of your original

remote control.

English

4. Programming

To make your remote suitable for your own equipment, you

have to program it once. You can do this by entering a code,

related to the brand and type of equipment you want to

control. You can program any equipment under any MODE

key. For example, if you have three videorecorders, you can

e.g. assign videorecorder 1 to VCR, videorecorder 2 to DVD

and videorecorder 3 to DVR. The TV button can be used for

TV only.

4.1 Controlling your house with Marmitek X-10 Automation

The Marmitek X-10 remote control allows you to control all

lights and electric appliances you have in your house. Here

are some examples that you can do with your Marmitek X-10

remote using Marmitek X-10 modules:

• Switch on/off, dim lights while you watch TV.

• Switch on the lights at night to frighten intruders when

you detect something suspicious

• Switch on your electric blanket before the film ends to

have it warm when you go to sleep

To be able to control your lights and appliances you need a

Marmitek X-10 RF-interface (RFIX35) and Marmitek X-10

modules. Contact your dealer for further information.

You can control the Marmitek X-10 Automation Modules as

follows:

Make sure that the Marmitek X-10 remote control is programmed

on the same Letter Code as the RFIX35 RF-interface and the

modules installed in your house (see changing the Marmitek X-

10 Letter Code).

1. Press the Marmitek X-10 button.

2. Use the numerical keys to select the Unit Code of the

Module of your choice (1-digit codes do not have to

preceded by a '0').

3. Press the button of the function you want to execute (see

overview below).

Marmitek X-10 Automation functions:

On: CH NNEL +

Off: CH NNEL -

Brighter: VOLUME +

Dim: VOLUME -

ll lights on:XPower

ll units off: _Mute

Changing the Marmitek X-10 Letter Code

The Marmitek X-10 Remote is set to Letter Code by

default.

In most cases you do not need to change this setting, unless

another Marmitek X-10 or X10 compatible system in your

area causes interference. In case of interference we advice

to set the remote control and the RFIX35 in the RF-secured

mode (see "RF-secured mode").

1. Press the SETUP button until one of the Mode LED's

stays lit. Release the SETUP button.

2. Press the numerical key(s) for the Letter Code selected

(1= , 2=B, ...... 16=P).

3. Press the -/-- (12) button to confirm the Letter Code. The

LED will extinguish.

Note: The Letter Code selected must be the same as the

Letter Code used by your RFIX35 RF-interface.

RF-secured mode

In the RF-secured mode the RF-interface (RFIX35) will only

respond to remote controls that have been linked to the

RFIX35. This prevents others to control your lights and

appliances. To set the RFIX35 in the RF-secured mode please

refer to the RFIX35 manual.

To be able to use the RF-secured mode, the Marmitek X-10

remote control will have to be set in the RF-secured mode.

To set the Marmitek X-10 remote control into the RF-secured

mode please follow the next steps.

Set the ABX1 to the RF-secured mode

1. Program code 822 under the Marmitek X-10 button.

• Press SETUP button until the LED stays lit

• Press the Marmitek X-10 button

• Enter 8-2-2 , the LED will switch off after the last

2 buttons are pressed

2. Press the Marmitek X-10 button.

3. Press the SETUP button until the LED stays lit.

4. Release the SETUP button.

5. Press the V button to generate a random security code.

6. Press the -/-- button.

Reset the Remote Control to the standard mode

(= non RF-secured mode)

To reset the BX1 to the standard mode, program code 820

under the Marmitek X-10 button.

• Press the SETUP until the LED stays lit.

• Press the Marmitek X-10 button.

• Press 8-2-0, the LED will switch off after the 0 button is

pressed.

4.2 Manual code entry

Take your code book and search for the list matching the

equipment you are looking for, e.g. TV or VCR. Next, find

the relevant brand (e.g. Sony). Now you will find one or more

3-digit codes. If there is more than one code, it depends on

your equipment which code is correct.

Generally, the codes are displayed in order of age of the

equipment. Older equipment first, younger equipment at the

end. Sometimes you will have to try several codes before

you find the right code for your equipment.

1. Make sure your equipment is switched on (for example

TV).

2. Press and hold the SETU (8) key until the LED indicator

lights continuously. Release the SETU key.

3. Press and release the mode key (3) of the device you

want to control (for example TV).

4. Enter the 3 digit code from the Code Book by using the

key pad (9). The LED (2) turns off after the last digit is

entered. If you entered a wrong code the LED blinks for 3

seconds and then goes off. You have to repeat from step 2.

5. Point the remote in the direction of your TV and press the

OWER button (1). Your device should turn off. Check other

functions (for example for a VCR FF or REW, etc.). If certain

functions are not responding, this indicates that the entered

code is not the correct one. In that case repeat the above

procedure with the next corresponding code of your brand.

English

6. Repeat this procedure from step 1 for the other equipment

you want to control (VCR, DVD, S T,...). If your equipment

(TV, S T, etc....) does not respond, try the other codes for

your brand. If it still doesn't respond, try the manual code

search method (4.4 Manual code search).

4.3 Automatic code search for some well-known brands

If your brand is listed hereafter, you can use the brand

search method (faster than the "manual" and the "automatic

code search").

BRAN CO E BRAN CO E

Philips & Sub brands / Radiola 1 Telefunken / Saba /

Normende 4

Sony / Panasonic / JVC / Sharp

/ kai / Toshiba / Daewoo 2 Grundig / Blaupunkt 5

& Other Japanese brands

Thomson / Brandt / Ferguson 3 Nokia / Finlux / ITT &

Other Scandinavian 6

brands

1. Turn on the device you want to control.

2. Press and hold SETU (8) until the LED indicator (2)

lights steadily. Release SETU button.

3. Press the mode button (3) that matches the equipment

you wish to control. The LED (2) blinks once.

4. Enter the code corresponding to your brand, point the

Marmitek X-10 Remote in the direction of your equipment,

press CHAN+ (5) once only. Continue to point the Marmitek

X-10 Remote at your equipment until the equipment

changes Channel (the remote control sends an IR signal

every second. Please wait until your equipment reacts).

When your equipment does react, press on the key -/-- (11)

to confirm. If you accidentally miss the code, you can stop

the autosearch by pressing CHAN-( 5) and by repeatedly

pressing this key return to the right code. Press -/-- (11) to

confirm.

Remark: if some functions of your equipment don't work,

you need to try another code for your brand. The search

function starts after the last confirmed code. For example, if

it was 030, the search function starts at 031, and it will keep

on trying until the last possible code.

4.4 Automatic code search for all brands

When searching an unknown code, you can step through the

library automatically ( utoSearch). When your equipment

responds, you can stop the searching process and store the

code you found.

Note: as you can dedicate any appliance (TV, DVD, S T...)

to VCR, CBL, DVD, etc. keys, you need first to enter any 3

digit code for the kind of appliance you wish to control (found

in the code book), i.e.: If you want to program a S T under

the VCR key, enter NY S T code found in the code book

and then follow the steps below:

1. Turn on the device you want to control.

2. Press and hold SETU (8) until the LED indicator (2)

lights steadily. Release SETU button.

3. Press the mode button (3) that matches the equipment

you wish to control. The LED (2) blinks once.

4. Press CHAN+ (5) once. fter a few seconds the remote

starts stepping through the code library (fast search, 1 code

Andere Handbücher für X-10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Marmitek Fernbedienung Handbücher

Marmitek

Marmitek TV Anywhere 5.8GHz Bedienungsanleitung

Marmitek

Marmitek SH624 Bedienungsanleitung

Marmitek

Marmitek SILVERLINE 8 Bedienungsanleitung

Marmitek

Marmitek EASYTOUCH25 Bedienungsanleitung

Marmitek

Marmitek POWERMID PLUS Bedienungsanleitung

Marmitek

Marmitek MultiMedia Remote Bedienungsanleitung

Marmitek

Marmitek PC CONTROL Bedienungsanleitung

Marmitek

Marmitek GIGACONTROL 450 Bedienungsanleitung

Marmitek

Marmitek 20075/20070403 Bedienungsanleitung

Marmitek

Marmitek INVISIBLE CONTROL 4 Bedienungsanleitung

Marmitek

Marmitek EASYTOUCH ET35 Bedienungsanleitung

Marmitek

Marmitek Invisible Control 6 XTRA Bedienungsanleitung

Marmitek

Marmitek EasyControl4 Bedienungsanleitung

Marmitek

Marmitek POWERMID XL Bedienungsanleitung

Marmitek

Marmitek Easycontrol 6 Betriebsanleitung

Marmitek

Marmitek StereoControl Bedienungsanleitung

Marmitek

Marmitek KR21 Bedienungsanleitung

Marmitek

Marmitek PROGUARD 800 Series Bedienungsanleitung

Marmitek

Marmitek Invisible Control Bedienungsanleitung

Marmitek

Marmitek EASYTOUCH 35 - Bedienungsanleitung

Marmitek

Marmitek LK15 Bedienungsanleitung

Marmitek

Marmitek GigaControl450 Bedienungsanleitung

Marmitek

Marmitek TIP10RF Bedienungsanleitung

Marmitek

Marmitek HR10 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung