Marshall Electronics VDA-106-3GS Bedienungsanleitung
Broadcast A/V Division
VDA-106-3GS
1 x 6 3G/HD/SD-SDI
Reclocking Distribution Amplifier
Marshall Electronics
User Manual
Marshall Electronics
2
Safety and Notice
The VDA-106-3GS 1x6 3G/HD/SD-SDI Distribution Amplier with Reclocking
has been tested for conformance to safety regulations and requirements, and
has been certied for international use. However, like all electronic equipment,
the VDA-106-3GS should be used with care. Please read and follow the safety instructions to
protect yourself from possible injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep away the objects that might damage the device and assure that the placement of this
unit is on a stable surface.
• Use only the power adapter, power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
3
● 1xVDA-106-3GS
● 1x5Vpoweradapter
● 1xUserManual
www.LCDracks.com
VDA-106-3GS Manual
PACKAGE CONTENTS
INTRODUCTION
The VDA-106-3GS is a compact and reliable distribution amplier which accepts a single SDI
input and provides six identical outputs. All embedded data is passed transparently. Signals are
reclocked and cable equalization is provided to support long cable runs. The VDA-106-3GS is
useful for providing video to multiple destinations (recorders, displays, encoders) from a single
video source.
FEATURES
●3G/HD/SDserialdigitaldistribution
●Sixseparatelybufferedandreclockedoutputs
●Cableequalizationandsignalretiming
●DualcolorLEDindicationofinputlockandrate
●Passesallancillarydata
●Providesautomaticinputcableequalizationupto300m
(1000ft)@SD,150m(500ft)@HD/3G
www.LCDracks.com
Marshall Electronics
4
SPECIFICATIONS
ModelName VDA-106-3GS
Technical
SDIstandards 3G/HD/ SD -SDI
Auto3G/HD/SDdetection Yes
Supportedprotocols DVB-ASI at 270Mbps,SMPTE 259M, SMPTE 292M, SMPTE 424M,
SMPTE425M
Videobandwidth [2.97Gpbs & 2.97/1.001Gbps]
Datarates 270 / 1483 / 1485 / 2970 Mbps
Outputimpedance 75Ω
Reclockingfunction Yes
Cableequalization [3G] up to 90m (300ft) / [HD] up to 150m (500ft)
[SD] up to 300m (1000ft)
Audiosupport Yes
RP-198pathologicalpatterns Immune
Input 1x BNC [SDI]
Output 6x BNC [SDI]
Eyepatterncharacteristics[HD] Amplitude: Within 800mV (<10%)
Rise overshoot: Less than 2% (<10%)
Fall overshoot: Less than 2% (<10%)
Long time jitter: 0.195 UI (<1.0 UI)
Timing jitter: 0.8 UI (<1.0 UI)
Alignment jitter: 0.13 UI (<0.2 UI)
Mechanical
Housing Metal encosure
Dimensions[LxWxH]
Model 105 x 78 x 27mm [4.1” x 3” x 1”]
Package 270 x 175 x 80mm [10.6“ x 6.9” x 3.2”]
Carton 450 x 370x 300mm [1‘5.7” x 1’2.6” x 11.8”]
Weight Model: 310g [ 10.9oz] / Package: 785g [1.7lbs]
Powersupply 5VDC 4A with locking connector
Powerconsumption 5 Watts [max]
Operationtemperature 0~40°C [32~104°F]
Storagetemperature -20~60°C [-4~140°F]
Relativehumidity 20~90% RH [no condensation]
www.LCDracks.com 5
PANEL DESCRIPTIONS
FrontPanel
RearPanel
1 2 4356
1. 3G/HD/SD-SDIinput
2. LED - Orange: SD, Green: 3G/HD
3. 3G/HD/SD-SDIoutput
4. LED - Orange: Power indicator, Green: signal detected
5. 3G/HD/SD-SDIoutput
6. 5VDCpowerjack
7.3G/HD/SD-SDIoutput
7
VDA-106-3GS Manual
Marshall Electronics
6
HARDWARE INSTALLATION
1. Connect a camera or other device equipped with 3G/HD/SD-SDI outputs to VDA-106-3GS
3G/HD/SD-SDI input.
2. Connect devices equipped with 3G/HD/SD-SDI inputs (e.g. monitors or video processors) to
SP-3016 3G/HD/SD-SDI outputs.
3. Plug power adapter cable into 5V DC power jack.
7
www.LCDracks.com
VDA-106-3GS Manual
SIGNAL MEASUREMENT
Figure 1
Figure 2
Figures 1 and 2 show actual test results demonstrating extremely low jitter and proper performance with
standard pathological test signals. All tests performed using Belden 1694A coaxial cable.
Marshall Electronics, Inc.
1910 East Maple Ave. El Segundo, CA 90245
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.LCDracks.com
Rev:1
Marshall Electronics warranties to the rst consumer that this VDA-106-3GS, 1x6 3G/HD/SD-
SDI Splitter will, under normal use, be free from defects in workmanship and materials, when
received in its original container, for a period of one year from the purchase date. This warranty
is extended to the rst consumer only, and proof of purchase is necessary to honor the warranty.
If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the
right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the
consumer.
This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling,
alterations or modications in design or construction void this warranty.
No sales personnel of the seller or any other person is authorized to make any warranties other
than those described above, or to extend the duration of any warranties on behalf of Marshall
Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specications may change
without notice.
WARRANTY
Inhaltsverzeichnis
Andere Marshall Electronics Verstärker Handbücher
Marshall Electronics
Marshall Electronics OPTIONAL ACCESSORIES MC-0105 Bedienungsanleitung
Marshall Electronics
Marshall Electronics V-IO12 Bedienungsanleitung
Marshall Electronics
Marshall Electronics VDA-104-3GS Bedienungsanleitung
Marshall Electronics
Marshall Electronics MD-0512 Bedienungsanleitung
Marshall Electronics
Marshall Electronics MD-0114-EQ Bedienungsanleitung
Marshall Electronics
Marshall Electronics SDI VIDEO DISTRIBUTION AMPLIFIER BD-0314 Bedienungsanleitung
Marshall Electronics
Marshall Electronics MD-0114 Bedienungsanleitung
Marshall Electronics
Marshall Electronics BD-0114 Bedienungsanleitung
Marshall Electronics
Marshall Electronics MC-0201-4 Bedienungsanleitung
Marshall Electronics
Marshall Electronics BD-0914 Bedienungsanleitung
