Martin M6 Series Bedienungsanleitung

M6™ Controller

Power cycle reliability improvement

Symptom

In some M6TM controllers, the mainboard may not start-up while all other parts of the controller

are powered-up normally.

Solution

Jumper J_ATXCTL1 must be set from position 1-2 to position 2-3.

Anti-Static Precautions

Important! Static electricity can destroy electronic

components. Follow these ESD precautions to prevent damage

to the product and injury to the user.

Carry out the service at an anti-static workstation.

Wear a grounded anti-static wristband.

Touch a grounded conductor every few minutes to discharge any

static buildup.

Hold components by their edges only. Do not touch the surfaces or

any of the contacts of the PCBs.

www.martin.com •Olof Palmes Allé 18 •DK-8200 Aarhus N • Denmark

Tel. (+45) 8740 0000 •Fax (+45) 8740 0010

Setting jumper J_ATXCTL1

1. Switch the controller OFF and

disconnect the power cable from the

controller.

2. Open the right back cover of the

controller (seen from the back of the

controller): unscrew 5 screws (Use a

torx T-10)

3. Slide the cover plate from the

controller

www.martin.com •Olof Palmes Allé 18 •DK-8200 Aarhus N • Denmark

Tel. (+45) 8740 0000 •Fax (+45) 8740 0010

4. Locate Jumper “J_ATXCTL1” on

the mainboard (see arrow).

www.martin.com •Olof Palmes Allé 18 •DK-8200 Aarhus N • Denmark

Tel. (+45) 8740 0000 •Fax (+45) 8740 0010

5. Jumper is in position 1-2. Set

jumper to position 2-3.

6. Connect power to the controller

and switch ON.

7. If the mainboard doesn’t power up,

press the power-on switch on the

mainboard (to the right of the

jumper).

8. Wait until the menu appears on the

screen, and power-off (mains

switch on the front).

9. Power-on again (mains switch on

the front). The mainboard should

now start automatically.

10. Power-off again and close the

controller.

Andere Handbücher für M6 Series

Inhaltsverzeichnis

Andere Martin Controller Handbücher

Martin

Martin M6 Series Bedienungsanleitung

Martin

Martin M3776UK Bedienungsanleitung

Martin

Martin maxxyz modules series Bedienungsanleitung

Martin

Martin DMX 8 Zone Bedienungsanleitung

Martin

Martin DMX Controller 2518 Bedienungsanleitung

Martin

Martin Maxxyz Bedienungsanleitung

Martin

Martin DMX 8 Zone Bedienungsanleitung

Martin

Martin M2GO HD Bedienungsanleitung

Martin

Martin M6 Series Bedienungsanleitung

Martin

Martin M2GO Bedienungsanleitung

Martin

Martin Freekie Bedienungsanleitung

Martin

Martin P3-100 Bedienungsanleitung

Martin

Martin DMX Controller 2518 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch