Martin MAC 2000 Profile II Handbuch

Andere Handbücher für MAC 2000 Profile II

2

Andere Martin DJ-Equipment Handbücher

Martin

Martin MAC 575 Krypton Bedienungsanleitung

Martin

Martin Exterior Projection 1000 Bedienungsanleitung

Martin

Martin RUSH MH 10 Beam FX Bedienungsanleitung

Martin

Martin MAC 600 NT Bedienungsanleitung

Martin

Martin MAC 700 WASH Bedienungsanleitung

Martin

Martin Exterior Inground 400 Bedienungsanleitung

Martin

Martin RUSH PAR 3 RGB Bedienungsanleitung

Martin

Martin MAC Encore Performance CLD Einrichtungshandbuch

Martin

Martin LC 2140 Bedienungsanleitung

Martin

Martin MAC Allure Wash PC Bedienungsanleitung

Martin

Martin RUSH MH 7 Hybrid Bedienungsanleitung

Martin

Martin MAC 2000 Wash XB Bedienungsanleitung

Martin

Martin Mania EF1i Bedienungsanleitung

Martin

Martin RUSH MH 11 Beam Bedienungsanleitung

Martin

Martin MAC 2000 Wash XB Bedienungsanleitung

Martin

Martin Exterior Projection 500 Bedienungsanleitung

Martin

Martin M-Series Bedienungsanleitung

Martin

Martin THRILL Multi-FX LED Einrichtungshandbuch

Martin

Martin MAC Axiom Hybrid Bedienungsanleitung

Martin

Martin THRILL Compact PAR 64 LED Bedienungsanleitung

Martin

Martin THRILL Mini Profile Bedienungsanleitung

Martin

Martin PixLine 10 Bedienungsanleitung

Martin

Martin MAC Quantum Profile Bedienungsanleitung

Martin

Martin MAC III Quadray Module Gebrauchs- und Wartungshandbuch

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung

www.martin.com

The Woodroffe Gobo Collection

Thank you for choosing the Woodroffe Gobo Collection from

Martin for the MAC 2000 Profile.

This leaflet contains instructions for changing the gobos in

your existing fixture. On the reverse side of this page, the

correct standard layout of the gobo set is shown in detail.

Should you have any questions, please contact your local

Martin distributor.

Martin Professional A/S

www.martin.com

Special Note:

The structured glass gobo ‘Limbo’, originally installed in the

MAC 2000 Profile in position 5 on wheel 1, remains in the

fixture in the same position under the new name ‘Crystal’.

The structured glass gobo ‘Limbo Doughnut’ in position 1 on

wheel 2 needs to be removed. As this gobo was originally

glued into its gobo holder, a new gobo holder and retention

spring are included with your new gobos.

Procedure for replacing a gobo

To replace a rotating gobo in the MAC 2000 Profile II:

1. Disconnect the fixture from power and allow it to cool.

2. Lock the head in the upside-down position, as indicated

by the text on the rear panel, and remove the bottom

cover (see Fig. A). Turn the gobo wheels as required to

access the desired position. Pull the gobo holder away

from the wheel slightly to release it, then remove it.

TOP

1

3

4

5

2

1

2

3

4

51

2

3

4

5

6

7

3. Remove the gobo retention spring from the gobo holder

and drop the gobo out of the holder.

4. Insert the new gobo in the holder. Important: if one side

of a gobo is more reflective, this side must face towards the

lamp, and the darker side must face away from the lamp

Warning:

To minimize the risk of gobo overheating and damage, turn the

more reflective side of a gobo towards the lamp.

The less reflective side of a gobo will absorb less heat if it

faces away from the lamp.

TOP

1

3

4

5

2

1

2

3

4

51

2

3

4

5

6

7

5. Insert the spring with the narrow end against the

gobo.(see Fig.C) To identify the narrow end, press the

spring flat: the narrow end is on the inside. Push the

wider end of the spring in under the lip of the holder.

6. Work the rim of the gobo holder under both clips on the

gobo wheel and snap the gobo holder back into position.

If necessary, a small screwdriver or similar tool may be

used to pry the clips away from

the wheel.

7.

Replace the bottom cover and release

the pan and/or

tilt locks before

reapplying power.

T

O

P

1

3

4

5

2

1

2

3

4

5

1

2

3

4

5

6

7

TOP

1

3

4

5

2

1

2

3

4

51

2

3

4

5

6

7

The Woodroffe collection as installed in the MAC 2000 Profile II

Wheel 1

TOP

1

3

4

5

2

1

2

3

4

51

2

3

4

5

6

7

The Woodroffe collection as installed in the MAC 2000 Profile II

Wheel 2

TOP

1

3

4

5

2

1

2

3

4

51

2

3

4

5

6

7

The Woodroffe collection as installed in the MAC 2000 Profile II

Wheel 3

© 2005 Martin Professional A/S. P/N 35000567a

www.martin.com