Master&Dynamic MW07 Gebrauchsanweisung

CONTROLS

VOL-

VOL+

PAUSE / PLAY

2X: SKIP FORWARD

HOLD WHILE IN EAR TO

ACTIVATE VOICE ASSISTANT

SKIP BACK3X:

Right Left

TRUE WIRELESS

EARPHONES

HOLD WHILE OUT OF EAR

TO ACTIVATE PAIRING

MULTI-FUNCTION

BUTTON

To insert your earphones follow these steps:

Tilt the earphone forward

with the ear tip resting

lightly in your ear canal.

Rotate the earphone down until

the ear tip forms a seal with

your ear canal and the fit wing

slips under your ear ridge.

Right

Your earphones come with small fit wings and medium ear tips attached.

For a more secure fit, choose the ear tips that form a seal with your ear

canal, and the fit wings that comfortably fit under your ear ridge. To

remove or attach the fit wings you must first remove the ear tips.

FIT WING OPTIONS

EAR TIP OPTIONS

BATTERY INDICATORS Case charges to 50% in 15min;

100% in 40min

Full

Med

Low

EARPHONES

CASE

Your earphones hold 3.5 hours of listening time when fully charged. The charging

case holds an additional three full charges for your earphones. We recommend

placing your earphones inside the case when they are not in use, to ensure they

are charged to the fullest each time you begin to use them.

When you place the earphones inside the charging case and close the lid, the

earphones and case battery status will display after three seconds. The LED

indicators will display as amber before displaying your battery level status.

To charge the case, plug one end of the USB-C cable into the back of the case and

plug the other end into a power source. If you do not have a USB-C power source

you can use our supplied USB-C to USB-A adapter to use a USB-A power source.

The first time you take your earphones out of the case they will enter

pairing mode. The indicator light will slowly pulse. Access Bluetooth

settings on your source device, locate MW07 and connect. The light will

stop flashing and you will hear a tone to confirm successful pairing.

If you wish to pair to a different device, long press the button on the

right earphone while it is out of your ear until you see the indicator light

slowly pulse. You may then repeat the pairing process above.

PAIRING

PULSING

INDICATOR LIGHT

MULTI-FUNCTION

BUTTON

Right Left

CHARGING PADS

PROXIMITY

SENSOR

Over time the proximity sensor that helps regulate pause/play functions may

become dirty and affect performance. If this happens, take a damp Q-tip or

damp cloth and lightly rub the sensor.

Clean the earphone acetate using a microfiber cloth. Do not use alcohol or

other cleaning substances on the product.

Clean the ear tips and earphones with a soft, slightly damp cloth. Do not soak,

submerge or allow moisture to enter near the drivers or cable jacks.

Do not drop, sit on, or allow the product to be exposed to water, moisture, or

temperature extremes. Your earphones are IPX4 water resistance rated. Your

charging case is IPX3 water resistance rated.

It is recommended that you return your earphones to their charging case

when not in use. To avoid damage to the charging case, do not store other

items in the canvas pouch along with your case.

MAINTENANCE/CARE

Our ability to hear is amazing. Treat your ears like the precious tools they are,

and they will continue to provide you with exceptional data, as well as a lifetime

of incredible sonic experiences.

In general, do not listen “too loud or for too long,” and be attentive to your

own ears. Ringing, discomfort, or sensitivity to high frequencies and treble

may be a signal from your ears that you are pushing them to their limits and

causing damage.

As a general practice, find what seems to be your preferred listening level and

then adjust the volume down another 10% or more. Surprisingly, your ears will

attune to a slightly lower volume over time, and what seems quiet at first can

be perfect for longer listening periods.

If you are interested in tuning your ear to have a more refined sonic palate,

there are some apps and training programs you can find online.

HEARING HEALTH

NIHL is a preventable condition caused by both one-time and extended

exposure to excessive decibel (dB) levels. This harm to sensitive inner ear

structures is irreversible and people of all ages can be affected. Damage can

happen in a single event or gradually over time. One-time exposure to an

intense "impulse" sound, such as an explosion, or by continued exposure to

loud sounds over 85 decibels can cause harm. Indicators of NIHL include

hearing loss and tinnitus, a condition of sensing constant ringing, buzzing or

roaring. The NIDCD (National Institute on Deafness and Other Communication

Disorders) offers this simple rule of thumb: avoid sound exposure that is “too

loud, too close or too long.” Here are some general references to sound levels

that occur in everyday life: refrigerator humming (45 dB); normal conversation

(60 dB); city traffic (85 dB); motorcycles (95 dB); an MP3 player at full volume

(105 dB); sirens (120 dB); firecrackers (150 dB).

NIHL

Operate and store this product within the temperature range of -4°F to 113°F

(-20°C to 45°C) only. Charge the battery where the temperature is between

41°F and 104°F (5°C and 40°C) only.

TEMPERATURE RANGE

Master & Dynamic uses NFMI technology for connecting one earphone to the

other. While this is industry leading technology, and not specific to Master &

Dynamic products, there may be some instances where interference or

micro drop outs may occur.

Intermittent interference or micro drop outs can be caused by numerous

factors, but common causes include, but are not limited to the following: door

security systems, bus/metro token machines, large metal objects and close

proximity to other NFMI-enabled devices.

NFMI

THE EARPHONES AND DEVICE DO NOT PAIR

• Make sure the earphones are not placed in the charging case when

attempting to pair your device. Cycle power by placing earphones in the

charging case and fully closing the lid. Then remove the earphones from the

case to verify if they enter pairing mode. The indicator light will slowly pulse

on the right earphone.

• Turn Bluetooth OFF, then ON again on the source device.

• Turn OFF Bluetooth feature on any other device that is paired with

the earphones.

• Make sure “MW07” is selected in the Bluetooth device list.

PLAY/PAUSE NOT WORKING WHEN PLACING IN AND REMOVING FROM EAR

• Over time the proximity sensor that helps regulate pause/play functions may

become dirty and affect performance. If this happens, take a damp Q-tip or

damp cloth and lightly rub the sensor.

BATTERY LEVEL INDICATORS ON CHARGING CASE ARE NOT LIGHTING UP

• Make sure your case is charged. To charge the case, plug one end of the

USB-C cable into the back of the case and plug the other end into a power

source. If you do not have a USB-C power source you can use our supplied

USB-C to USB-A adapter to use a USB-A power source.

• Make sure the earphones are properly placed inside the charging case. “L”

represent placement for the left earphone and “R” for the right earphone.

• Make sure the charging pads on the earphones and charging pins in the case

are clean. Use a damp Q-tip or damp cloth to lightly rub the charging pads

and pins.

NOTE: If the earphones still have battery life, but the charging case runs out

when earphones are placed inside the case and the lid is closed, the indicator

lights will not light up to show your battery level status.

NO AUDIO OR POOR AUDIO QUALITY FROM A CONNECTED BLUETOOTH DEVICE

• Move the device closer to the earphones, as physical objects between the

earphones and the source may obstruct the signal.

• Try another music application or try another track.

• Try a different audio device.

TROUBLESHOOTING

Master & Dynamic guarantees this product against defects in materials or

workmanship for a period of two years from the date of original purchase on

our website or from an authorized Master & Dynamic retailer or reseller. As

an exception to this warranty period, batteries are guaranteed for proper

functioning without performance deterioration, for a period of one year from

the date of original purchase.

If returned within the warranty period, Master & Dynamic will at its discretion

either repair the defective product or replace it with a repaired or refurbished

product of identical specifications as the returned product.

This limited warranty is in lieu of all other warranties, expressed or implied,

including, but not limited to, any implied warranty of merchantability or fitness

for a particular purpose.

Master & Dynamic shall have no liability of any kind for any direct, indirect,

incidental or consequential damages or expenses that arise from the use of

this product.

WARRANTY Master & Dynamic’s warranty does not cover normal wear and tear, blown

drivers, cut cords, bent jacks, loss or theft. Parts subject to wear and tear

such as ear pads and cables, will be replaced only in case of malfunctioning due

to material or manufacturing defects, and only once during the warranty

period of your product. You will void your warranty if you disassemble your

headphones or expose them to excessive moisture.

If you believe your product is defective within the warranty period, please

serial number, proof of purchase, telephone number and full return shipping

address in your message to us.

Conditional to serial number, proof of purchase, and warranty validity, you will

be issued a return authorization and instructions for return shipment.

For questions regarding your product’s warranty, visit the SUPPORT/FAQ page

at MasterDynamic.com or contact Master & Dynamic Support at

[email protected].

Andere Handbücher für MW07

Inhaltsverzeichnis

Andere Master&Dynamic Kopfhörer Handbücher

Master&Dynamic

Master&Dynamic ME01 Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME05BR Bedienungsanleitung

Master&Dynamic

Master&Dynamic MH40 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MH40 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW09 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW07 GO Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW07 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MH40G1 Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME01 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MH40 Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME05 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW60 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW09 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME03 Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME01B Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW08 SPORT Bedienungsanleitung

Master&Dynamic

Master&Dynamic ME05 Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW50+ Bedienungsanleitung

Master&Dynamic

Master&Dynamic MW65 Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung