MasterForce 245-1676 Bedienungsanleitung

16" Side Cabinet

Model #: 245-1676 / 245-1536 / 245-1620 / 245-1570

CAUTION: To reduce the risk of injury, user must read

and understand operator’s manual. Save these instructions

for future reference.

OPERATOR’S MANUAL

Actual product

may differ slightly

from image shown.

Page 1 Page 2

TABLE OF CONTENTS

Safety Symbols ......................................................................... 2

Safety Instructions..................................................................... 3

Parts List ................................................................................... 4

Assembly and Operation........................................................... 5

Maintenance and Safety............................................................ 7

SAFETY SYMBOLS

Model #: _______________________________

Place of purchase: ______________________

Date of purchase:_______________________

Receipt # of purchase: __________________

CAUTION:

1. Read and follow all safety and assembly

instructions before using this product for

the ﬁrst time.

2. Fill in the following information and retain

the manual for future reference:

Do not open more than one drawer at a time.

Do not step on drawers.

Do not allow children near the unit.

Lock drawers before moving the unit.

Do not lift unit by yourself.

Page 3 Page 4

SAFETY INSTRUCTIONS PARTS LIST

The purpose of safety symbols is to attract our attention to possible dangers. The safety

symbols, and the explanations with them, deserve your careful attention and understand-

ing. The symbol warnings do not by themselves eliminate any danger. The instructions and

warnings they give are no substitute for proper accident prevention measures.

WARNING:

Be sure to read and understand all safety instructions in this man-

ual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION,”

before using this product. Failure to follow all instructions listed below may result in

electric shock, ﬁre and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May be

used in conjunction with other symbols or pictographs.

DANGER:

Failure to obey this warning WILL result in death or serious injury to

yourself or to others. Always follow the safety precautions to reduce the risk of personal

injury.

WARNING:

Failure to obey this safety warning CAN result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the risk

of personal injury.

CAUTION:

Failure to obey this safety warning MAY result in personal injury to

yourself or others or property damage. Always follow the safety precautions to reduce

the risk of personal injury.

For service regarding parts, assembly or warranty information, please call 1-800-459-4409.

The keys are taped to the inside

of the ﬁrst drawer of the cabinet.

Ref# Description Part# Qty

1Hanger 213800 1 pc

2M6x16

Countersink

Head Screw

320069 4 pcs

3Connecting

Channel

202690 1 pc

4Washer 324299 2 pcs

5 M6x20 Hex Bolt 321152 2 pcs

6 Slide (R) 300020R 7 pcs

7Drawer Liner 362436 6 pcs

8Slide (L) 300020L 7 pcs

9Lock 304131 1 pc

NOTE: Replacement keys may be ordered,

using the required code which appears on

the face of the lock.

Give this information for service parts:

part number and quantity.

Page 5 Page 6

NECESSARY TOOLS REQUIRED

FOR ASSEMBLY

• 10 mm socket

• Extension ratchet

• Phillips screwdriver

INSTALL THE HANGER

NOTE: The universal mounting system

on this side cabinet ﬁts most rolling tool

cabinets. The top lid of the cabinet must be

more than 1/2" high and at least 18" deep.

The hanger will mount on either side of this

cabinet. The side cabinet will also accept

the side handle of your rolling cabinet.

To install the hanger, position it over

the holes in the side cabinet and attach

with the 4 (four) M6x16 countersink head

screws. Tighten securely.

HANG THE

SIDE CABINET

Hang the side cabinet on the top lip of your

rolling cabinet.

CONNECT

THE CABINETS

Make sure the drawers of both cabinets are

empty, then place the two cabinets on their

backs on a protective surface. Position

the connecting channel on the bottom of

the cabinets, with its lip over the edge of

the rolling cabinet. Attach the connecting

channel to the side cabinet with 2 (two)

washers and 2 (two) M6x20 hex bolts.

ASSEMBLY AND OPERATION ASSEMBLY AND OPERATION

RAISE AND RELEASE

DRAWER FRONTS

These units are equipped with the raise

and release drawer front system.

To open, lift up on the drawer front while

pulling out towards you.

To close, shut the drawer ﬁrmly until the

latch engages.

If the drawer does not stay closed, the

drawer contents may be the obstruction,

or the hook may be slightly bent or it may

be rubbing up against the drawer slides. To

resolve this problem, lightly bend the hook

until the drawer engages in the slide.

TO REMOVE DRAWERS

Pull the drawer out so it is almost fully

extended. PUSH UP ON THE RIGHT hand

black release lever, while PULLING DOWN

ON THE LEFT hand black release lever.

While holding the levers in the positions as

instructed above, pull the drawer outward

until it is released from the drawer slide.

PUSH UP (RIGHT HAND SIDE)

PULL DOWN (LEFT HAND SIDE)

TO REPLACE DRAWERS

Extend the drawer slides from the tool

cabinet. Insert the brackets on each

side of the drawer into the slots in the

cabinet slides, being careful that they

are positioned properly. Once properly

inserted, completely close the drawer to

set the slides in their proper positions.

Page 8

NOTES

Page 7

MAINTENANCE

Lubricate the slides (twice a year) with

a product like WD40 or other quality

lubricant. This is especially important when

the temperature decreases, as the bearing

can become stiff.

Periodically the drawer fronts, drawer trim,

and other surfaces should be cleaned with

mild detergent and water.

Auto wax will preserve the storage unit’s

luster ﬁnish. Apply the wax as you would to

a car. The wax will also help protect the unit

against scratches.

Grease and oil can be removed with most

standard cleaning ﬂuids. For safety, use a

nonﬂammable cleaning ﬂuid.

SAFETY

WARNING:

Lock the

drawers before moving this product.

The drawers could come open and

make the product unstable and tip,

which may cause personal injury or

product damage.

CAUTION:

The maximum weight

for each drawer should be no more than

100 lbs.

CAUTION:

The maximum

product weight, including contents, should

be no more than 450 lbs.

WARNING:

DO NOT stand on

this product or lean on the drawers.

WARNING:

WEAR SAFETY

GLASSES when removing or repositioning

the slides. The tool could slip which may

cause personal injury.

CAUTION:

BE CAREFUL when

opening more than one drawer. The product

could become unstable and tip, which may

cause personal injury or product damage.

WARNING:

DO NOT mount this

product on a truck bed or any other moving

object. This may cause personal injury or

product damage.

CAUTION:

Secure this product

properly before moving it with a forklift.

WARNING:

DO NOT alter this

product in any manner. For example, do not

weld external lockbars or attach electrical

equipment. This may cause product

damage or personal injury.

CAUTION:

Keep this product on

level surfaces. The product may become

unstable and tip if stored or moved on an

uneven surface, which may cause personal

injury or product damage.

WARNING:

DO NOT attach or

mount this product to a vehicle. Mounting

this product to any vehicle in any manner

will void the warranty.

MAINTENANCE AND SAFETY

Page 10Page 9

NOTES

SAVE YOUR RECEIPTS

THIS WARRANTY IS VOID WITHOUT THEM

Page #

16" Side Cabinet

LIMITED LIFETIME WARRANTY

MASTERFORCE®Tool Cabinets and Chests have been manufactured to the

highest standards of quality and workmanship and are warranted to be free from

defects in materials and workmanship under normal use for the lifetime that you

own the product. If any part of the product is found to be defective during normal

use, the defective product or part will be replaced at our discretion. This warranty

does not cover products that are damaged through accident, abuse, misuse,

commercial/industrial applications or neglect. This warranty also does not

cover any losses, injuries or costs including indirect, incidental or consequential

damages. This warranty may not be transferred or sold. When requesting warranty

service please have the model number, cash register receipt and the date of

purchase available when you call. If the product is defective, we will replace

the defective part at no cost to you. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitations or

exclusions may not apply to you. This warranty gives you speciﬁc legal rights and

you may have other rights, which vary from state to state.

For questions / comments, technical assistance or repair parts,

call toll free: 1-800-459-4409 (Monday–Friday, 8:30am–5pm, EST)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MasterForce Werkzeugaufbewahrung Handbücher

MasterForce

MasterForce 211-4314 Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung