Matrix Switch Corporation MSC-XD121S Bedienungsanleitung

Matrix Switch Corporation

MSC-XD121S

Product Manual

Compact 12 input 1 output 3G-SDI Video Router with Statu Panel

Revi ion 1.8

MSC-XD121S Product Manual

Lega Disc aimers

All material in this document is the legal property of Matrix Switch Corporation.

Information contained in this publication regarding device applications and the like is

provided for your convenience only and may be superseded by updates. It is your

responsibility to ensure that your application meets with your specications. MA RIX

SWI CH CORPORA ION MAKES NO REPRESEN A IONS OR WARRAN IES OF ANY

KIND WHE HER EXPRESS OR IMPLIED, WRI EN OR ORAL, S A U ORY OR

O HERWISE, RELA ED O HE INFORMA ION, INCLUDING BU NO LIMI ED O

I S CONDI ION, QUALI Y, PERFORMANCE, MERCHAN ABILI Y OR FI NESS FOR

PURPOSE. Matrix Switch Corporation disclaims all liability arising from this

information and its use. Use of Matrix Switch Corporation devices in life support and/or

safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,

indemnify and hold harmless Matrix Switch Corporation from any and all damages,

claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly

or otherwise, under any Matrix Switch Corporation intellectual property rights.

Contacting Matrix Switch Corporation

Web ite http://www.matrixswitch corp.com

Toll Free (800) 764-4084

Phone +1 (530) 477-9122

Grass alley, California

Email info@matrixswitch corp.com

MSC-XD121S Product Manual

Table 1: Document Revision History

Revision & Date Changes

Revision 1.8

2018-11-01

•Added MSC-FS44BFL, MSC-FS44FBL, and MSC-FS44FL SFP SDI routers.

•Added MSC-XV1664, MSC-XV3232L, MSC-XV3232S, MSC-XV3248, MSC-

XV4832, and MSC-XV6416 routers.

Revision 1.7

2018-02-20

•Added MSC-UXD 12G-SDI systems

•Updates to SDI specications

•Other minor changes

Revision 1.6

2017-03-07

•Added MSC-HDV88+DC systems.

•Increased Storage and Operating temperature specications.

Revision 1.5

2016-11-18

•Corrected External Button Control Pinout pin diagram for MSC-HD41L,

MSC-HD22L, and MSC-HD42L systems.

Revision 1.4

2016-08-01

•Mascot protocol updated to 3.0 with System Parameter commands, Matrix

I/O mapping commands, and Panel/GPIO commands.

•Improved Software Update documentation.

•Added pinouts for RS-232 and RS-485 serial port and GPIO Auxiliary

interface.

•Added XD series systems.

Revision 1.3

2016-05-17

•Added MSC-CP59X59E panel.

Revision 1.2

2015-08-20

•Added protocol commands: MtxGroup, PanelDis, and PanelExtEn.

•Updated Mascot protocol information to version 2.4.

•New manuals for MSC-V1616(LS)(+DC), MSC-1HD1616(LS)(+DC)

Revision 1.1

2014-06-24

•Updated External Button Control Pinout section.

•Added External Button Control information for MSC-HD42L.

2014-03-17 •Fixed some document cross references.

•Minor text content and gure position changes.

2013-11-29 •MSC-4HDX6464 manual released.

•Updated Mascot protocol information to version 2.3.

•Added Vars Mascot command description.

Revision 1.0

2013-04-15

•Initial release of modular product manual.

MSC-XD121S Product Manual

Tab e of Contents

1 Getting Started...................................................................................................................................................7

1.1 Device Connections.....................................................................................................................................7

1.2 Powering Up The Device.............................................................................................................................7

1.3 Front Status Panel........................................................................................................................................8

1.4 eb Page Interface.......................................................................................................................................8

1.4.1 Accessing The eb Page Interface.......................................................................................................8

1.4.2 Network Settings..................................................................................................................................9

1.4.3 Matrix Routing.....................................................................................................................................9

1.4.4 Labels...................................................................................................................................................9

1.4.5 Presets...................................................................................................................................................9

1.5 Network Planning.........................................................................................................................................9

1.5.1 Installation Example...........................................................................................................................11

2 Web page interface...........................................................................................................................................12

2.1 Overview....................................................................................................................................................12

2.2 Routing Tab................................................................................................................................................12

2.2.1 Changing a connection.......................................................................................................................13

2.2.2 Loading a preset.................................................................................................................................13

2.3 Presets Tab..................................................................................................................................................13

2.3.1 Loading ork Matrix from a source target........................................................................................14

2.3.2 Saving ork Matrix to a target..........................................................................................................14

2.3.3 Usage scenarios..................................................................................................................................14

2.4 Labels Tab..................................................................................................................................................14

2.5 Config Tab..................................................................................................................................................15

2.5.1 System Settings..................................................................................................................................16

2.5.2 Network Settings................................................................................................................................16

2.5.3 Button Panel Settings.........................................................................................................................17

2.6 Command Tab............................................................................................................................................18

3 Ma cot Control Protocol.................................................................................................................................19

3.1 Protocol Changes.......................................................................................................................................19

3.2 Telnet Access..............................................................................................................................................20

3.3 Serial Access..............................................................................................................................................20

3.4 Command Format.......................................................................................................................................20

3.4.1 Command Names...............................................................................................................................21

3.5 Response Format........................................................................................................................................21

3.6 Command Arguments.................................................................................................................................22

3.7 System Parameters.....................................................................................................................................23

3.7.1 System Parameter Table.....................................................................................................................24

3.8 Core Commands.........................................................................................................................................24

3.9 Configuration Commands..........................................................................................................................25

3.10 Miscellaneous Commands.......................................................................................................................26

3.11 Command Reference................................................................................................................................26

3.11.1 C Command......................................................................................................................................26

3.11.2 DestNames Command......................................................................................................................26

MSC-XD121S Product Manual

3.11.3 DHCP Command..............................................................................................................................27

3.11.4 E Command......................................................................................................................................28

3.11.5 Firmware Command.........................................................................................................................28

3.11.6 FrameIP Command...........................................................................................................................28

3.11.7 Gateway Command..........................................................................................................................29

3.11.8 Get Command...................................................................................................................................29

3.11.9 GetS Command.................................................................................................................................30

3.11.10 Help Command...............................................................................................................................30

3.11.11 IP Command...................................................................................................................................30

3.11.12 LockStatus Command.....................................................................................................................31

3.11.13 MAC Command.............................................................................................................................31

3.11.14 MapDest Command........................................................................................................................31

3.11.15 MapSrc Command..........................................................................................................................32

3.11.16 MascotVer Command.....................................................................................................................33

3.11.17 MtxCfg Command..........................................................................................................................33

3.11.18 MtxGroup Command......................................................................................................................36

3.11.19 NetMask Command........................................................................................................................36

3.11.20 P Command....................................................................................................................................37

3.11.21 PAdd Command..............................................................................................................................37

3.11.22 PairIO Command............................................................................................................................37

3.11.23 PanelCmd Command......................................................................................................................38

3.11.24 PanelCmdEn Command.................................................................................................................39

3.11.25 PanelCond Command.....................................................................................................................39

3.11.26 PanelDis Command........................................................................................................................40

3.11.27 PanelExtEn Command....................................................................................................................41

3.11.28 PanelRate Command......................................................................................................................41

3.11.29 PClr Command...............................................................................................................................42

3.11.30 ProtoSer Command.........................................................................................................................42

3.11.31 PsetNames Command.....................................................................................................................42

3.11.32 PSub Command..............................................................................................................................43

3.11.33 PView Command............................................................................................................................43

3.11.34 Reboot Command...........................................................................................................................44

3.11.35 ReclkDis Command........................................................................................................................44

3.11.36 RemoteSync Command..................................................................................................................44

3.11.37 S Command....................................................................................................................................45

3.11.38 SerBaud Command.........................................................................................................................45

3.11.39 Set Command.................................................................................................................................46

3.11.40 SetA Command...............................................................................................................................47

3.11.41 SetS Command...............................................................................................................................47

3.11.42 SrcNames Command......................................................................................................................47

3.11.43 SysName Command.......................................................................................................................48

3.11.44 SysType Command.........................................................................................................................48

3.11.45 Vars Command................................................................................................................................49

3.11.46 Command...................................................................................................................................50

3.11.47 ebPass Command........................................................................................................................50

3.11.48 X Command....................................................................................................................................50

MSC-XD121S Product Manual

4 Software Update .............................................................................................................................................52

4.1 Software Update on Pyxis Series Devices.................................................................................................52

4.2 Software failsafe recovery procedure.........................................................................................................52

4.3 TFTP Software...........................................................................................................................................53

4.3.1 indows.............................................................................................................................................53

4.3.2 Mac OS X...........................................................................................................................................54

4.3.3 Linux...................................................................................................................................................54

5 Trouble hooting................................................................................................................................................56

5.1 Unknown IP address...................................................................................................................................56

5.2 Unexpected reboots....................................................................................................................................56

6 Reference..........................................................................................................................................................57

6.1 Specifications.............................................................................................................................................57

6.2 Serial Interface Pinout................................................................................................................................57

6.3 Glossary......................................................................................................................................................58

7 Matrix Switch Corporation Warranty...........................................................................................................60

MSC-XD121S Product Manual

1 Getting Started

Congratulations on your purchase of a quality Matrix Switch Corporation product. This section contains a

general overview of device functionality and provides information to get you up and running quickly.

Additional sections in this manual can be consulted for more detailed information on the subsystems and

features of this product.

1.1 Device Connections

The MSC-XD121S comes with a power supply adapter, a redundant power supply and a documentation CD.

Additional cables and hardware are not usually provided.

•Power upply adapter – A 7.5 VDC 2 Amp power supply adapter is provided which is connected to the

5.5mm OD 2.1mm ID twist locking coaxial connector on the device and plugged into a 100-240V

50/60Hz AC power source.

•Redundant power upply (Optional) – The additional redundant power supply can be connected via

the second power supply connector, to provide an additional power source in the event that one of the

supplies fails or is disconnected from the power source.

•Ethernet connector (Optional) – Connect to a network switch with an Ethernet cable. Required for

accessing the web page interface, TCP/IP Mascot interface or for interfacing with remote control panels.

This device can also be connected directly to a computer or remote panel (supports auto MDI-X

allowing a crossover or straight through Ethernet cable to be used).

•SDI BNC Video Input – Connect SDI sources to input connectors using 75 Ohm Coax cable with

BNC connectors designed for high speed SDI video applications. Unused inputs can be left

unconnected. Inputs with supported standard rate (3G, HD or SD) SDI signals will be auto re-clocked

for reduced jitter. Other non standard rates between 125 Mbit/s and 3.0 Gbit/s will be passed through

without re-clocking or jitter reduction. Adaptive cable equalization on each input can equalize input

signals from Belden type 1694A cables up to lengths of 400m @SD, 140m @HD, and 120m @3G.

•SDI BNC Video Output – Connect SDI destinations to output connectors using 75 Ohm Coax cable

with BNC connectors designed for high speed SDI video applications. Unused outputs can be left

unconnected. Outputs utilize standard SMPTE levels of 800mV peak-to-peak. This model features quad

redundant SDI outputs.

•Sync Reference (Optional) – If switching on vertical sync pulse is desired, connect one of the Sync

Reference connectors to a sync pulse signal (NTSC, PAL or tri-level) using 75 Ohm Coax with BNC

connectors and the other Sync Reference connector can be used as a pass-through to additional properly

75 Ohm terminated equipment or a 75 Ohm terminator should be installed. If the sync reference

functionality is not used, both connectors can be left unconnected.

•RS-232 Serial (Optional) – If serial control is desired, using the Mascot P rotocol , connect a D9 female

to male straight through cable to a control system, such as a computer. Use 115200 bps 8N1 as the serial

configuration and enable local echo to see typed characters. See Serial Interface Pinout for additional

details.

•RS-485 Serial (Optional) – An RS-485 port is also available utilizing pins on the same D9 connector as

the RS-232 interface. This port is configured as a Mascot P rotocol control interface by default, but can

also be used to control other routers as additional matrix levels. See Serial Interface Pinout for

additional details.

1.2 Powering Up The Device

MSC-XD121S Product Manual

This device is not equipped with a power switch and is simply connected to the power supply adapter which is

plugged into a suitable AC power source, to power it up.

Once the device is powered it goes through the following startup sequence:

•Reset switch is checked and if it is pressed then the Software failsafe recovery procedure is entered.

•Routing matrix is initialized to Preset 0 state (defaults to source 1 connected to all destinations).

1.3 Front Status Pane

The MSC-XD121S has a status front panel with 3 LED indicators, described in the following table:

LED Label De cription

PS 1 Power supply 1 good indicator.

PS 2 Power supply 2 good indicator.

FAULT Red LED for user configurable faults.

Table 2: Status Panel Indicators

This model is not equipped with a built-in button control panel, however several options are available for

controlling the device, including the web page interface, telnet, RS-232 serial and remote control panels.

1.4 Web Page Interface

All Matrix Switch Corporation router and panel devices come with a built-in web page interface.

This is the recommended interface for configuration and is also a convenient way to control the matrix routing

of the device.

Devices come factory configured with default settings, unless a pre-configuration request is made during

purchase, an example being a multi device application.

1.4.1 Accessing The Web Page Interface

The default network IP address for this device is 192.168.2.60. Refer to the table below for the default IP

addresses for other types of Matrix Switch Corporation devices.

Device Type Default IP Addre

Video/Audio Routers 192.168.2.60

Remote Button Panels 192.168.2.64

Remote LCD Screen Panels 192.168.2.80

Table 3: Default System IP Addresses

To access the web page interface of the device:

1. Connect the Ethernet port of a computer either directly to the device using a straight through or

crossover cable to the same Ethernet network through a network switch or other LAN infrastructure.

2. Manually configure the computer's IP address to be a unique address on the same IP subnet as the

MSC-XD121S Product Manual

device. For example 192.168.2.10. The Netmask should be 255.255.255.0. A Gateway address is not

necessary for this purpose, but could be set to 192.168.2.1.

3. Make sure the device is powered on.

4. Using a web browser on the computer, enter the device's IP address into the Location bar and press

ENTER. The device web page interface should load. If the web page interface fails to load, double

check the computer's network settings and physical Ethernet connections. In the event that the IP

address of the device is unknown, refer to the Unknown IP Address troubleshooting section.

1.4.2 Network Settings

Network settings can be changed on the Config tab of the eb Page Interface. This includes DHCP enable, IP

address, Netmask and Gateway settings. DHCP should only be used for assigning specific network settings

from a central DHCP server or when assigned IP addresses can be determined, otherwise configuring the device

via its IP address would be prevented if the IP address is unknown. After changing network settings, click the

Save button and then click the Reboot button to restart the device. Refer to the Config Tab - Network Settings

section for more details.

In the event that the device's IP address is unknown, refer to the Unknown IP Address troubleshooting section.

Refer to the Network Planning section for assistance with developing a network plan for multi-device

applications.

1.4.3 Matrix Routing

The Routing tab of the eb Page Interface provides a convenient way to view and change the matrix routing

state and is the default page shown.

A preset can also be recalled from this interface, by selecting one from the Load Preset drop down control.

Refer to the Routing Tab section for more details.

1.4.4 Labe s

Labels can be assigned to video (and audio if applicable) sources and destinations. Labels can also be assigned

to presets. Labels can be up to 8 characters in length. The default source labels use “Src” as a prefix, and the

destination labels use “Dest” as a prefix (example: Src1). The presets are labeled “Startup” for Preset 0 and

“PresetN”, where N is a number from 1 to 9, for the remaining presets.

The Labels Tab on the eb Page Interface can be used for modifying labels. Click the Save button to store any

changes that are made. Refer the Labels Tab section for more details.

1.4.5 Presets

There are 10 stored matrix routing presets. Preset 0 is recalled on power up and by default routes source 1 to all

destinations. All other presets default to “No Change” for all destinations, which when recalled will have no

effect. Presets can assign a partial subset of destinations or all destinations as desired.

Presets can be modified on the Presets Tab of the eb Page Interface. Refer to the Presets Tab section for more

details.

1.5 Network P anning

MSC-XD121S Product Manual

The default device settings can be used without change, in applications with a single router and optionally one

remote panel on the same Ethernet network. Larger installations or integration with existing IP LAN networks

require some network planning.

NOTE: Matrix Switch Corporation can assist in planning and pre-configuring devices for specific application

requirements at purchase time. Just ask a sales or customer service representative.

Manual IP address management is recommended, although a DHCP server can be a convenient option for

centrally managing IP addresses by device MAC address, resulting in a fixed IP for each device. Consult your

DHCP server documentation for information on assigning IP addresses by MAC address, if this is desired.

All devices which need to communicate with one another (routers, remote panels and computers) need to be

physically connected to the same LAN or allow IP packet routing between networks if on separate LANs.

SECURITY WARNING: Matrix Switch Corporation devices are meant for installation in trusted LAN

environments. In the event that remote device configuration or control is desired over public networks or the

Internet, it is strongly recommended that some form of inter-network security is utilized, such as VPN. This is

necessary to prevent undesired access to devices.

Devices on the same LAN need to be assigned unique IP addresses in the same IP subnet. Matrix Switch

Corporation devices are configured by default to use IP addresses in the class C IP subnet 192.168.2.x. hen

integrating devices into an existing LAN network, unique IP addresses should be assigned from the applicable

network and the Netmask setting of the devices should be set to reflect the class (size) of the IP network (the

default of 255.255.255.0 is for class C, which accommodates up to 254 addresses).

The Gateway setting is required to be set to the IP address of the network gateway on remote panels which will

be accessing routers across network subnets, but this setting is otherwise not needed.

After assigning device network settings, including unique IP addresses, remote panels need to be assigned the

correct IP addresses to their Remote Router IP setting of the router they will control.

Additional configuration changes may be required, depending on the application and are described in

subsequent sections.

Inhaltsverzeichnis

Andere Matrix Switch Corporation Matrix-Umschalter Handbücher

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD41L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-FS44FL Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XV4832 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161AAS Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81DES Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XD81L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD84L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD88AAL Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XA1616S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81DEL Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD121AAL Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-TXD71L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XD44S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XD0816L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XDM2000S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-UTX44L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-V1664 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XV6416 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DES Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-V1616S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-XV3248 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung