Matrix G7-S34 Bedienungsanleitung

Table of Contents

CHAPTER1: Serial number location.................................................................................... 2

CHAPTER2: Important Safety instructions

2.1 Important Safety Information .................................................................................................... 3

2.2 Check for Damaged Parts......................................................................................................... 3

CHAPTER3: Preventative Maintenance

3.1 Preventative Maintenance Checklist.......................................................................................... 4

3.2 Repetition Counter Info.............................................................................................................. 4

CHAPTER4: Product specification& warranty information

4.1 G7-S34 Seated Row.................................................................................................................. 6

CHAPTER5: Assembly instructions

5.1 G7-S34 Seated Row Assembly Instructions.............................................................................. 7

CHAPTER6: Troubleshooting

6.1 Troubleshooting - Repetition Counter Issues............................................................................ 12

6.2 Troubleshooting - Incremental Weight Pin Issues..................................................................... 14

6.3 Troubleshooting – Arms are uneven......................................................................................... 15

6.4 Troubleshooting - Weight Stack Pin Issues............................................................................... 16

6.5 Troubleshooting – Cable is Failing off a Pulley or CAM ……………………………………………17

6.6 Troubleshooting – Cable Jacket is Failing...………………………………………….………………18

6.7 Troubleshooting – Repetition Counter Magnet Missing or Failing off.….……………………….…19

6.8 Troubleshooting – ROM Plunger or Pull Pins Do Not Move Easily………..………………….……19

6.9 Troubleshooting – Seat Loose or Will Not Spring Up…….………………….……………………....20

6.10 Troubleshooting – Seat Failing…………………………….………………….……………….….…..21

CHAPTER7: Part replacement Instructions

7.1 Testing the Unit ........................................................................................................................... 22

7.2 Aluminum Wing Replacement...................................................................................................... 22

7.3 Top Cover Replacement.............................................................................................................. 23

7.4 Repetition Counter Replacement................................................................................................. 24

G7-S34 Seated Row Service manual

7.5 Weight Stack Shroud Replacement............................................................................................. 25

7.6 Repetition Sensor Replacement.................................................................................................. 26

7.7 Incremental Weight Pin Replacement......................................................................................... 27

7.8 Weight Plate Replacement.......................................................................................................... 29

7.9 Weight Stack Pulley Assembly Replacement.............................................................................. 31

7.10 Hand Grip Replacement............................................................................................................ 32

7.11 Seat Pad Adjustment Handle Replacement……………............................................................ 32

7.12 Head Pad Replacement............................................................................................................ 33

7.13 Back Pad Replacement............................................................................................................. 33

7.14 Seat Pad Replacement.............................................................................................................. 34

7.15 Adjustable Tie Rod Replacement……………………………………………….………………….....35

7.15 Small Connecting Rod Replacement …………………………………………..………………….....36

CHAPTER1: Serial number location

The serial number is located at the bottom of the weight stack frame.

CHAPTER2: Important Safety instructions

2.1 Important Safety Information

It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals,

whether they are the end user or supervising personnel on proper usage of the equipment.

PROPERUSAGE:

Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative

that Matrix Fitness Systems equipment be used properly to avoid injury.

Keep hands and feet clear at all times from moving parts to avoid injury.

WARNING: Serious injury can occur on this equipment. Follow these precautions to avoid injuries.

1) Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while

using this equipment.

2) All warnings and instructions should be read and proper instruction obtained prior to use.

3) Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.

4) Keep body, hair, clothing, and fitness accessories free and clear of all moving parts.

5) Inspect the machine before use. DO NOT use the machine if it appears damaged or inoperable.

6) Check to see that the selector pin is completely inserted into the weight stack.

7) NEVER use the machine with the weight stack pinned in an elevated position.

8) Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means

provided directly from the manufacturer.

9) This equipment should only be used in supervised areas where access and control are regulated by the

owner.\

2.2 Check for Damaged Parts

1) DONOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts

supplied by Matrix Fitness Systems or your local Matrix Fitness Systems dealer.

2) MAINTAINLABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important

information. If unreadable or missing, contract Matrix Fitness Systems for a replacement.

3) SECUREEQUIPMENT: All equipment must be secured to the floor to stabilize and eliminate rocking or

tipping over. This must be performed by a licensed contractor.

4) MAINTAINALLEQUIPMENT: Preventative maintenance is the key to smoothly operating equipment as

well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.

5) Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified

to do so. Matrix Fitness Systems will provide service and maintenance training at our corporate facility upon

request.

CHAPTER3: Preventative Maintenance

3.1 Preventative Maintenance Checklist

Preventative maintenance and daily cleaning will prolong the life and look of your Matrix Fitness Systems

equipment.

ACTION FREQUENCY

Clean Upholstery Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As eeded

Clean Grips As eeded

Clean Linear Bearing Guide Rods (Calf Press and Leg Press only)

As eeded

Lubricate Linear Bearings (Calf Press and Leg Press only) As eeded or every 1.5 million cycles

Lubricate Guide Rods As eeded

Upholstery and grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild

soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton

cloth and then apply up and down the guide rod.

Linear bearings should be lubricated with a SKF LGMT 2 grease.

3.2 Rep Counter Information

To see the accumulated reps or hours:

1) Hold a magnet to the outside of the rep counter face plate over the clock for 5 seconds to activate Service

Mode.

2) The rep counter will read r0 in the left window and the first 3 digits of the total reps in the right window

(Figure A), record this information.

3) After 3 seconds, the rep counter will switch to r1 and the next 3 digits of the total reps are shown in the right

window (Figure B). Record this information.

4) If there are further digits in the total reps, the rep counter will switch to r2. Record this information.

5) Combine the r values to determine the total reps. Using Figures A & B below, the unit would have 237,145

total reps.

6) Once the complete number of total reps has been displayed, the rep counter will flash c0 and the first 3

digits of the accrued hours of use are shown (Figure C).

7) After 3 seconds, if there are more digits in the accrued hours, the rep counter will switch to c1 (Figure D).

8) Combine the c values to determine the accrued hours. Using Figures C & D below, the unit would have

1,209 accrued hours.

9) Remove the magnet from the rep counter to reset to normal function.

TOTAL RESET

1) To reset all data on the rep counter, three magnets must be simultaneously held to all 3 reed switches (2 in

the stack and one in the faceplate) for 5 seconds. This clears all recorded data and cannot be recovered.

LOW BATTERY

1) When the rep counter battery gets low, the display will read Lo bAt (Figure E). At this point, the battery

needs to be replaced. This WILL NOT erase the Service Mode data.

CHAPTER4: PRODUCT SPECIFICATION & WARRANTY INFORMATION

G7-S34 Seated Row

TECHNICAL SPECIFICATIONS

Overall Dimensions (L x W x H 64"L x 48"W x 52H"

Weight 646 lbs.

Shipping Weight 693 lbs.

WARRANTY

Frame (not coatings 10 years

Weight Stacks 5 years

Drive sets: cam, pulley, bearing 5 years

Belt/Cable 2 years

Wear items: foam grips, cover, decal, seat pad 1 years

CHAPTER5: ASSEMBLYINSTRUCTIONS

G7-S34 Seated Row Assembly instructions

Unpacking the G7-S34 Seated Row

Thank you for purchasing the Matrix Fitness Systems Seated Row. This machine is an EN957-1 and E9576-2

compliant Class S product. Your Matrix Seated Row is inspected before it is packaged. It is shipped in

multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the

components by matching them with the exploded diagrams. The weight stack is shipped in separate

packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing

materials in accordance with your local laws.

CAUTION

The weight of the Matrix Fitness Systems Seated Row is 350 lbs (159 kg) not including the weight stack. The

weight stack tower is packaged completely assembled for ease of installation; use extra caution when

removing the unit from its pallet during assembly. The weight stack for this machine is 296 lbs (135 kg). To

avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance

removing the frame pieces from this box. Be sure to install the equipment on a stable base, properly level the

machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this

machine is 300 lbs

G7-S34 Seated Row Assembly instructions- Continued

Step1

Step2

Step3

Step4

Step5

Step6

Andere Handbücher für G7-S34

Inhaltsverzeichnis

Andere Matrix Heim-Fitnessstudio Handbücher

Matrix

Matrix VS-S42 Bedienungsanleitung

Matrix

Matrix MG-PL79 Bedienungsanleitung

Matrix

Matrix VS-S71 Bedienungsanleitung

Matrix

Matrix VS-S53 Bedienungsanleitung

Matrix

Matrix Rower Bedienungsanleitung

Matrix

Matrix G7-S57 CALF EXTENSION Bedienungsanleitung

Matrix

Matrix VS-S13 Bedienungsanleitung

Matrix

Matrix MAGNUM SERIES Bedienungsanleitung

Matrix

Matrix G7-S70 Bedienungsanleitung

Matrix

Matrix VS-S74 Bedienungsanleitung

Matrix

Matrix G7-S73 Bedienungsanleitung

Matrix

Matrix VARSITY Series Bedienungsanleitung

Matrix

Matrix VERSA Series Bedienungsanleitung

Matrix

Matrix MAGNUM SERIES Bedienungsanleitung

Matrix

Matrix MAGNUM SERIES Bedienungsanleitung

Matrix

Matrix AURA G3-PL23 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Matrix

Matrix VS-S72 Seated Leg Curl Bedienungsanleitung

Matrix

Matrix G1-MG30 Bedienungsanleitung

Matrix

Matrix AURA Series Bedienungsanleitung

Matrix

Matrix ROWER-02 Bedienungsanleitung

Matrix

Matrix Premium S7xe Bedienungsanleitung

Matrix

Matrix MX-FW80 Bedienungsanleitung

Matrix

Matrix VS-S71 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung