Max HT-R45C Bedienungsanleitung

HT-R45C

Tapener

JAN 2022

INSTRUCTION MANUAL

BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE

SAFETY WARNING AND INSTRUCTIONS.

KEE THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE

REFERENCE.

WARNING

January 31, 2022

SPECIFICATIONS

Name

HT-R45C

Dimensions

148mm H x 353mm L x 35mm W

Staples Used

MAX STAPLES 604C-L 4,800 pcs)

MAX STAPLES 604E-L 4,800 pcs)

Number of

Staples Loaded

MAX STAPLES 604C-L 200 pcs/stick

MAX STAPLES 604E-L 172 pcs/stick

Tape Used

MAX TAPE-10 WHITE, 0.1mm T x 11mm W x 40m L

MAX TAPE-15 GREEN, 0.15mm T x 11mm W x 26m L

MAX TAPE-25 RED, 0.25mm T x 11mm W x 16m L

MAX TAPE-200R GREEN, 0.15mm T x 11mm W x 26m L photolysis)

Weight

430 grams

Bundling Limit

Maximum 45mmᶲ

Blade

TC90045 MAX™ Cutter for Tapener Series

Staple

Dimensions

January 31, 2022

PARTS LIST

Index No.

Parts Code No.

Description

1 HT11778 B CASE S2

2 FF31714 STRAIGHT PIN 1714

3 FF31712 STRAIGHT PIN 1712

4 KK33402 TORSION SPRING 3402

5 KK29192 COMPRESSION SPRING 9192

6 HT11768 LOCK PLATE S2

7 HT11627 A CASE

8 CC43107 NAT M4 3)

9 AA05719 +PH TAP SCREW 3x8 P)

10 HT11632 CLINCHER

11 HT11622 TAPE CATCH

12 HT11671 TAPE PLATE S

13 AA25537 SCREW BIND M4x6

14 HT11618 CLINCHER ARM

15 AA05716 SCREW BIND 4x6 S-TIGHT)

16 HT11619 ARM SUPPORT

17 HT11637 B HANDLE

18 FF31713 STRAIGHT PIN 1713

19 HT11755 GRIP

20 KK13390 EXTENSION SPRING 3390

21 HT70106 MAGAZINE UNIT

22 FF31716 STRAIGHT PIN 1716

23 HT11761 PUSHER

24 HT11610 SPRING GUIDE ROD

25 KK29131 COMPRESSION SPRING 9131

26 HT11609 STAPLE COVER

27 TC90045 MAX CUTTERFOR TAPENER SERIES

28 KK34099 TORSION SPRING 4099

29 HT70070 TAPE GUIDE S UNIT

30 FF41740 STEP PIN 1740

31 HT11763 TAPE GUIDE SUPPORT S

32 HT11781 TAPE GUIDE BASE S2

33 FF31711 STRAIGHT PIN 1711

34 KK83018 CONICAL SPRING 3018

35 JJ10103 E-RING 3.2

36 HT11615 ROLLER

37 FF31643 STRAIGHT PIN 1643

38 FF31644 STRAIGHT PIN 1644

39 HT11754 DRIVER

40 HT11788 A HANDLE

41 HT11603 TAPE SPRING

48 AA05715 SCREW BIND 4x16 P)

50 HT70097 TAPE HOLDER ASSY HT-S)

51 HT70107 BOBBIN CASE ASSY

53 HT11669 RUBBER WASHER 1.7x6x2

55 HT11697 ARM SUPPORT S

57 HT70111 TAPE CATCH S2 ASSY

58 HT81017 A HANDLE ASSY

59 HT11762 BACKUP WASHER

60 KK34101 TORSION SPRING 4101

61 HT11766 JAM CLEARING STICK

January 31, 2022

PARTS DIAGRAM

January 31, 2022

HOW TO SE

How to Load Staples

1. Hold the body with one hand, push the lever down and pull the lever towards your

direction.

* The pusher cannot be removed from the main body.

2. While holding the tool in one hand, insert staples into the magazine so that staples’ legs

point upward, and then set them in the pusher unit by sliding lever. You can load 604C

type or 604E type staples.

Caution

 Be sure to use MAX staples and MAX tape.

 NEVER place your fingers near the front end of the magazine unit because there is a

serrated blade and the staple ejection port nearby.

 Do not insert a branch near the cutting blade. Doing so may damage the cutting blade

or peripheral parts.

How to Open Tape Holder and Bobbin Case and Load the Tape

How to Load the Tape

1. Open the tape holder and bobbin case, and insert the tape roll into the bobbin case.

2. Pull tape into the tape holder and make sure approximately 5cm of tape hangs out of

the edge of the tape holder.

3. Load the tape through the two guides of the tape guide.

January 31, 2022

How to Pull Out Tape

1. Squeeze the handle so that the tape catch will catch the tape end deep enough.

2. Release the handle as explained. The tape will pull out.

3. If the tape catch unit does not catch the tape end when you squeeze the handle, please

squeeze the handle harder several more times, and the tape catch will return to its

normal position this is not a trouble with the tapener).

Note: this should be done only when the tape catch does not catch the tape end.

How to Bind Objects

1. Press the tape against the object until it is positioned inside the tapener.

2. Then fully squeeze the grip with the tape positioned centrally, and the object will be

bound by both the tape and staple, simultaneously the tape is cut off.

January 31, 2022

How to Change Blade

Preparation

1. Do not remove the cap from the blade.

2. Remove the tape and staples.

3. Open the arm and tape holder cover,

4. Hold the main body with one hand.

Change the Blade

1. Press the button and pull out the old cutting blade.

2. Press the button and push the cutting blade cap deep enough so that three triangles are

aligned correct position shown in the figure).

 Release the button and pull off the cutting blade cap.

WARNING

 Keep your fingers away from the cutting blade.

 Confirm that the round hole of the cutting blade is completely hidden.

January 31, 2022

How to Replace Serrated Blades

1. Use fine pliers to remove old blade.

2. Insert new blade TC90045) using blade holder supplied with blades.

3. Keep pushing until blade in secured by red button.

How to Remove Jammed Staples

While the pusher unit is open, remove any loaded staples, and then remove the stuck staple

with a small screwdriver.

January 31, 2022

AFTER SE

In order to maintain proper performance, apply oil to the specified locations after each use.

Inhaltsverzeichnis

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung