MAXHUB C75CA Bedienungsanleitung
6TFS.BOVBM
*OUFSBDJWF'MBU1BOFM
.PEFM$$"$$"$$"
$POUFOU
4BGFUZ8BSOJOH
$POUSPM1BOFM5FSNJOBM
$POOFDUJPO4FUUJOH
.FOV0QFSBUJPO
4JNQMF5SPVCMFTIPPUJOH
.BJOUFOBODF
'"2
4UBUFNFOU
Safety Warning
Placement
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not expose the unit to direct sunlight and other sources of heat.
'RQRWSXWWKHXQLWQHDUDSSOLDQFHVWKDWJHQHUDWHPDJQHWLF¿HOGV
Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
Do not put heavy objects on top of the unit.
Power Supply
Check that the unit’s operating voltage is identical with your local power supply.
Please unplug power supply and antenna plug when the weather is thunder-storm or lightning.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
Please keep power cable from physical or mechanical damage.
Please use the original power cable from the accessory bag, don't modify or lengthen it.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
LED Screen
Never use any other hard or sharp object to replace the touch pen.
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
Never use water or the spray type detergent to clean the unit.
For deep clean, please contact an authorized service center.
Better for the panel lifetime and the display performance, do not display high brightness image
for long time.
Temperature
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and
do not turn it on at least 2 hours,
making sure the moisture inside the unit is all evaporated.
Normal operating temperature is 0 ~ 40℃.
Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool.Normal operating humidity is 10~90%.
Ventilation
Please put the unit in a well ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and back
>10cm, top> 20cm.
Earphone
Using the earphone to listen loud sound for a long time might effect the hearing.
Before using earphone, please turn down the volume in advance.
Safety Warning
Standby
It will enter standby mode but not turn off the unit after press the standby key.
Battery
Please make sure the battery get proper disposal or recycle after using.
Please keep the battery away from kids and don't throw the battery into fire.
Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.
Power Switch Status Signs
“I” means power on, “O” means power off.
Notes for Maintenance
7KLVPDFKLQHFDQRQO\EHPDLQWDLQHGE\FHUWL¿HGHQJLQHHU
Control Panel & Terminal
1.Control Panel
Key Function
Tap to enter EnergySaving function. Press at least 2
seconds to enter standby mode.
Receiving remote control signal
3FNPUF$POUSPM
4JHOBM3FDFJWFS
12
2 2 3
USB Interface
Control Panel & Terminal
2.Terminal
2
1
3
4
5
6
7
8
9
10
11
12
13
14
HDMI OUT
USB
HDMI IN
TOUCH
AUDIO IN
VGA IN
MIC
YPbPr
AV IN
COAX OUT
RS232
EARPHONE
LAN
AC IN
122 435
676
8 9 10 11 12 13 14 15 16
15
16
Terminal Function
Microphone input
Component input
Composite video and audio input
Coaxial output
Serial interface, used for mutual transfer of data between devices
Connected to device with headphone input function
Power Switch
HDMI OUT USB2.0 USB2.0 HDMI IN-1 HDMI IN-2 HDMI IN-3(2.0) TOUCH AUDIO IN - 1 - VGA IN VGA IN - 2 - AUDIO IN
MIC YPbPr AV IN COAX OUT RS232 EARPHONE LAN
33 7 4
Antenna
Connected to display devices with VGA input function
External computer audio input
External computer touch signal input
LAN interface, connecting RJ45 terminals
AC power input, connecting AC power supply
To open and shut down AC power supply. “I” means power on, “O”
means power off
High-definition multimedia interface signal output
Connect USB devices such as mobile hard disk, U disk, USB drives,
USB keyboard and mouse, etc
High-definition multimedia interface signal input
Connection & Setting
7("$BCMF
64#$BCMF
For the safety of you and the machine, please do not connect any
power plug before connection.
1.External Computer and Touch Connection
NoteὉ
External computer input, equipment's best resolution is 1920*1080.
External computer can also connect to the equipment through the HDMI cable.
Recommended computer configurationὉ
2.0GHz above Processor, 2GB above Memory
More than 256 color display card
VGA-OUT/HDMI-OUT, Audio-OUT, USB Interface
Support Resolution 800*600, 1024*768, 1920*1080
$PNQVUFS
"VEJP$BCMF
(1) Use VGA cable to connect to VGA output port of external computer, and meanwhile use
headphone audio cable to connect to external computer audio output interface
(2) Use USB cable to connect to external computer USB port
(3) After cable connection, plug in power cord,and switch power on
(4) Start external computer
(5) Press to turn equipment on
(6) Press INPUT key to switch to VGAchannel
Connection & Setting
2.Audio and Video Equipment
"7*/
)%.**/
AV Cable
HDMI IN-3(2.0)
Camera
Video Game
Set-top
DVD
Satelliter TV ReceiverVideo Recorder
%7%
HDMI Cable
)%.*
HDMI IN-1 HDMI IN-2
(1) Use AV audio and video cables to connect audio and video equipments with AV output
(yellow for video, red for right sound channel, and white for left sound channel)
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch toAV channel
(1) Use HDMI cable to connect audio and video equipments with HDMI output
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to HDMI channel
Connection & Setting
3.Coaxial Connection
$PBYJBM$BCMF
LAN USB2.0
4.USB Connection
5.LAN Connection
64#%FWJDFT
3PVUFS
USB Cable
LAN Cable
(1) Use coaxial cable to connect audio equipments with coaxial input
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
Connection & Setting
34$POOFDUJPO
Serial Port Cable
$PNQVUFS
RS232
After using serial port cable to connect central control computer and equipment, certain
function of the equipment can be controlled via central control computer, such as: turn
on/off the equipment, and adjustment of sound volume, etc.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
