Mayku Multiplier MMUA22100AA Leitfaden
Installation and User Instructions
Mayku Multiplier
MMUA22100AA, MMUA22123UK, MMUA22123EU, MMUA22123AU, MMUA22112US
These are the original English instructions
If incorrectly used this machine may cause severe injury - please read this manual carefully
before operating your machine and keep for future reference.
May 2022
Version 1.00
Mayku Limited
The Biscuit Factory, Unit J410, Jam Studios, 100 Drummond Road, London, United Kingdom, SE16 4DG.
Table of Contents
Table of Contents 1
1 PREFACE 5
1.1 Description of the user 5
1.2 Conventions used in this manual 5
1.3 Explanation of safety warnings 6
1.4 Retaining instructions 6
1.5 Obtaining documentation and information 7
2 DESCRIPTION OF THE MAYKU MULTIPLIER 8
2.1 Intended use and reasonably foreseeable misuse 8
2.2 System overview 8
2.3 Technical data 9
2.4 Product Elements 11
2.5 Understanding the user interface 13
2.6 Explanation of auditory and visual signals 13
3 SAFETY INSTRUCTIONS 13
3.1 Graphical symbols 17
3.1.1 Explanation of safety information on the product and packaging. 17
3.2 Potential health consequences 18
3.3 Personal protective equipment 18
3.4 Simplified Declaration of conformity 18
3.5 FCC Compliance Statement 18
4 PREPARATION 20
4.1 How to transport and store the Mayku Multiplier 20
4.1.1 Dimensions and mass 20
4.1.2 Lifting, handling and transporting the product 21
4.1.3 Storing the product / Storing during intervals in normal use 22
4.2 How to install the Mayku Multiplier 22
4.2.1 Removal of the transport and packaging restraints 22
4.2.2 Unpacking the product 23
4.2.3 Packaging contents 24
4.2.4 Minimum space required 25
4.2.5 Installation of the Mayku Multiplier 26
4.2.6 Reduction of noise and vibrations 26
4.2.7 Stability of machinery 26
4.3 How to commission the Multiplier 27
4.3.1 Training of operators 27
4.3.2 Commissioning the machinery 27
5 OPERATION/USE 28
5.1 How to use the Mayku Multiplier 28
5.1.1 Power on 28
5.1.2 Turn on 28
5.1.3 Follow on-screen instructions 29
5.1.4 Connecting to WiFi 29
5.1.5 Machine Registration 30
5.1.6 Starting/Stopping the product’s operation 30
5.1.7 Checks before using the machine 31
Ensure the machine is on a level and even surface 31
Ensure both safety release valves have clearance and are not obstructed. 31
5.2 What to Do in emergency and exceptional Situations 31
6 MAINTENANCE 31
6.1 How to maintain the machine 32
6.1.1 Cleaning and lubrication 32
6.1.2 Draining the tanks 34
6.2 How to inspect the product 34
6.2.1 Weekly inspection tasks 34
6.2.2 Monthly inspection tasks 35
7 TROUBLESHOOTING AND REPAIR 35
7.1 How to identify and solve problems 35
7.2 Frequently Asked Questions 36
8 DISPOSAL 37
8.1 Disposal of electronic components 37
8.2 Disposal of packaging waste 37
9 WARRANTY 38
9.1 Exclusive Limited Warranty 38
9.2 Exclusions from and limitation to Warranty 38
9.3 Disclaimer of Warranties; Limitation of Liability 39
10 TERMS 40
10.1 Disclaimers 40
10.2 Limitation of Liability 41
EC/EU DECLARATION OF CONFORMITY 42
1 PREFACE
1.1 Description of the user
These instructions are intended for the end-user of the Multiplier. The end-user can be described as each
person who interacts directly with the machinery. The end-user typically includes, but is not limited to the:
- Operator
- Installer
- Maintenance personnel or technicians
Any maintenance required outside of this user manual shall be carried out by an authorised, qualified and
skilled maintenance personnel.
1.2 Conventions used in this manual
Bold
Names of machinery elements, options, processes, services, and utilities Names of interface elements
(such as windows, dialog boxes, buttons, fields, and menus)
Italic
Publication titles referenced in text
Emphasis (for example a new term)
Variables
1.3 Explanation of safety warnings
DANGER indicates a hazard with a high level of risk which, if not avoided, will result in death or
serious injury
WARNING indicates a hazard with a medium level of risk which, if not avoided, could result in
death or serious injury.
CAUTION indicates a hazard with a low level of risk which, if not avoided, could result in minor
or moderate injury.
NOTICE Indicates information considered important, but not hazard-related.
1.4 Retaining instructions
Read and understand this manual and its safety instructions before using this product. Failure to
do so can result in serious injury or death.
Follow all the instructions. This will avoid fire, explosions, electric shocks or other hazards that
may result in damage to property and/or severe or fatal injuries.
Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
The manufacturer is not liable for cases of material damage or personal injury caused by
incorrect handling or non-compliance with the safety instructions. In such cases, the warranty
will be voided.
1.5 Obtaining documentation and information
The latest version of the documentation is available at the following address:
mayku.me/manuals
For other questions, information, technical assistance or ordering user instructions, please
contact the manufacturer:
Mayku Ltd
The Biscuit Factory
Unit J410
Jam Studios
100 Drummond Road
London
United Kingdom
SE16 4DG
Website: https://www.mayku.me/
Contact: [email protected]
2 DESCRIPTION OF THE MAYKU MULTIPLIER
2.1 Intended use and reasonably foreseeable misuse
The Multiplier is intended to be used as a desktop pressure forming machine, for making high
detail molds from suitable templates for a range of applications.
The Multiplier is intended for indoor use in a well ventilated area only.
Unintended uses:
●The machinery shall only be used for applications as described by the manufacturer. All
other applications are unprofessional and considered dangerous. The manufacturer
cannot be held liable for damage resulting from errors, unintended or unprofessional use
of the machinery.
●This machinery is not intended for use by persons (including unsupervised children) with
restricted physical, sensory or intellectual capability or lack of experience and/or
knowledge.
●Only use the machinery within the specified performance limits as described in these
instructions.
●An external compressor shall not be connected to this machine under any
circumstances. This may result in injury or death.
The Multiplier shall only be used in accordance with the instructions described in this
installation and user manual. Any use other than those described in these documents is
considered as unintended use. Unintended use will invalidate the warranty.
2.2 System overview
The Multiplier is loaded with sheets of thermoplastic which are locked into the machine and
heated past their glass transition temperature using an infrared heating element. Once at the
required temperature the lid is locked, and up to 60 PSI of pressure is applied into the dome and
to the sheet. This pressure is generated by a compressor which stores air inside internal tanks.
The pressure is then vented through a silencer and the sheet is left to cool before removal.
2.3 Technical data
Parameter
Unit
Device name
Mayku Multiplier
Designation
Pressure Former
Type
Thermoforming Machine
Technical life span
10 Years
Input
110-240V, 12A/6A (Single Phase)
Maximum Pressure
4.1 bar/60 psi (Dome), 12 Bar/175 psi (Tank)
Max Power
1500W
Weight
Unboxed: 57kg (125lbs) | Boxed: 67.5kg (149lbs)
Frequency band
2.4GHz
Maximum radio-frequency power
transmitted in the frequency band(s)
in which the radio equipment
operates
20.05dBm
The A-weighted emission sound
pressure level at workstations,
exceeds 70 dB(A) but does not
exceed 80 dB(A) - about 78 dB(A),
uncertainty is 3dB(A). The
measurement was performed under
normal operation at the point of 1m
away from the machine and height
1.6m away from the operator
standing on the floor wearing ear
protection.
Operation and storage temperature
range
+5 to +40°C
Relative humidity
0 to 85%
FCC ID
2A6JZMMUA221
Software version
1.0
2.4 Product Elements
Front:
Back:
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
