Maytronics MTC8-UNI Bedienungsanleitung
1English
Robot Pool Cleaner by Maytronics
EN
FR
DEU
User Instructions
This model includes a Remote Control Unit.
You will find the User Instructions in a separate document.
Guide d’utilisation
Ce modèle comprend une télécommande.
Sa notice d’emploi fait l’objet d’un document séparé.
Istruzioni per l’uso
Questo modello è dotato di telecomando.
Le istruzioni per l’uso si trovano in un documento separato.
Instrucciones para el Usuario
Este modelo incluye una Unidad de Control Remoto.
Las Instrucciones para el Usuario están en un documento separado.
Bedienungsanweisungen
Diesses Modell besitzt eine Fernbedienungseinheit.
Die Bedienungsanweisungen für die Fernbedienung können Sie in
einem anderen Dokument finden.
IT
SP
MTC8-UNI
8151248, 2/2011
by
1English
What You’ll Find Inside the Box
Part X Comment
Base frame for filter elements 2
Ultra-fine filter 4 Filter
Bag for filters storage 1
Spring filter 4 Filters
“S” clip 4
Power supply unit 1
Robot pool cleaner 1
Remote control unit (RCU) 1
Caddy kit 1
Optional components available on request from your
robot pool cleaner distributor
Section 1 - Description of Main Components
1. Filters
Dual-level filtration system.
Spring filter + base frame
For dirty pools with large debris such as
leaves etc. – Useful for beginning of season.
Ultra-fine filter cartridge + base frame
For day-to-day use.
Factory default.
2. Brushes
There are three types of optional brushes, each designed to provide optimal traction on different pool surfaces. Only one type set is
provided with your robot pool cleaner.
PVC Brush
For concrete, PVC, fiberglass and liner.
Combined Brush
For rough ceramic surface and mosaic tiles.
Wonder Brush
For smooth ceramics.
Power Supply Unit
Robot Pool Cleaner
Filter and cartridges
2
English
3. Power supply unit
Digital, “Switch-Mode” power supply:
• Input - 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output - 30 VDC
• IP 54
Section 2 – Robot Pool Cleaner Operation
Part 1 – Preparing the Robot Pool Cleaner for Use
A. Assemble the Caddy kit – you will find the instructions in a separate document
B. Adjusting the handle float angle
The handle angel must be adjusted to determine the speed that the robot pool cleaner advances along the water-line
1. Lay the handle down at an angle of 180º
to the ground.
2. Push the base of the arm into the body
of the robot pool cleaner and slide it towards
the rear of the robot pool cleaner until it clicks
into the required position.
Normal advance
More efficient cleaning action on water-line.
Fast advance
Fast speed – For faster but less efficient cleaning
action on water-line.
ON
On/Off
switch
Push in here Slide here
Full Filter
Bag Indicator Delay
Indicator
Reset button
Push in hereSlide here
3English
C. Laying out the cable
Unwind minimal required cable to cover the entire pool size, straight the cable along the pool side.
Make sure there are no twists or kinks.
Part 2 - Into the water
Place the robot pool cleaner
into the pool and release the handle.
Note: When using the combined brushes or Wonder brushes, gently squeeze the Wonder brush material until it is totally wet.
Only use the original supplied Power supply Unit.
The Power supply Unit is Splash proof – Do not immerse it in water.
Unplug the Power Supply Unit before any servicing activity.
Do not plug the Power Supply Unit in before placing the pool cleaner in the water.
Ensure the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI).
Important: DO NOT enter the swimming pool while the pool cleaner is working.
3 Meters
10 feet Swivel
4
English
Turning the Robot Pool Cleaner ON
Part 3 – Taking the Robot Pool Cleaner out of the water
Unplug power supply before any servicing activity.
1. If the robot pool cleaner has not finished its cycle,
turn off the power supply unit and unplug the mains.
2. Pull the floating cable gently until the robot pool cleaner
has risen to the surface, then lift by the handle.
1. Plug the floating cable from the robot pool
cleaner into the power supply unit.
2. Plug the electrical cable from the power
supply unit into the mains.
3. Press the ON/OFF switch on the power
supply unit.
4. The robot pool cleaner will
now start to work.
Important: Do NOT lift the robot pool cleaner from the water by its cable.
Floating cable
On/Off
switch
ON
Important: DO NOT enter the swimming pool while the pool cleaner is working.
5English
Section 3 - Routine Maintenance
Part 1 - Extracting and cleaning the filter elements
Unplug power supply before any servicing activity.
Reassembling the filter elements
Insert the locating tabs at the bottom of the
filter element into their groves on the base frame, then close the “S” clip.
Locating tab
Locating tab groove
2 3
1
6
English
Reinstall the filters according to the diagram
DO NOT FORCE THE FILTERS INTO PLACE.
Part 2 - Dismantling and cleaning the impeller
Unplug power supply before any servicing activity.
Dismantle the impeller cover and
clean around the impeller housing,
then reassemble.
Grooved end fitting Octagonal end fitting
Important: Where applicable, you must reset the full filter bag indicator on the power supply unit.
Recommendation: Rinse all brushes with clean water after each cleaning cycle.
Coil the cable and store in dry cool area – Preferably on the Caddy if available.
Do NOT store the robot pool cleaner exposed to direct sunlight.
Do NOT store the robot pool cleaner exposed to excessive heat.
Do NOT store the robot pool cleaner exposed to frost.
Section 4 – Storage Advice
23
1
7English
Troubleshooting Guide
Before contacting your Robot Pool Cleaner distributor please read through this guide.
The pool water condition must be within the following parameters:
PH: 7.0 – 7.8 NaCl: Max 5,000 ppm
Temperature: 6˚C(43˚F) to 34˚C(93˚F) Chlorine: Max 4 ppm
Symptom Solution
Cable twisting or cable coils up Check for any obstruction in the pool
Remove excess cable from the pool
Make sure filter cartridge is clean
Straighten cable and lay it in the sun periodically
Robot pool cleaner is moving in circles or does not reach all pool
areas
Check for foreign objects in moving parts
Make sure filter elements are clean and that the filter
doors are closed
Make sure that there is enough cable laid out to cover the
whole pool
Before using the robot pool cleaner at the beginning
of the season you should brush any algae from the floor
and walls of the pool
Robot pool cleaner is not traveling sideways on walls Adjust the diagonal angle of the handle
Robot pool cleaner does not climb walls Make sure the filter cartridge is clean
If using the robot pool cleaner at the beginning of the season,
use the Spring cartridge
If using the robot pool cleaner at the beginning
of the season you should first brush any algae from the floor
and walls of the pool
Check if brushes are suitable for pool coating and replace
them if necessary
Check if brushes are worn and replace them if necessary
Make sure the Impeller area is clean
Check that the RCU is set for climbing
Robot pool cleaner not sinking Make sure the Wonder brushes or the combined
brushes are soaked in water
Robot pool cleaner disengaging from wall at water line If robot pool cleaner climbs too high consult your
robot pool cleaner distributor
RCU is not working Check if the batteries need replacing
Motor is not working
Check if the impeller is blocked
Check if the drive system is blocked
Electrical problem (power supply), check power source.
If power source is in order, please contact your
robot pool cleaner distributor
Additional troubleshooting is available at our Website:
www.maytronics.com
Andere Handbücher für MTC8-UNI
1
Inhaltsverzeichnis
Andere Maytronics Schwimmbadroboter Handbücher
Maytronics
Maytronics Dolphin WAVE 200 XL Bedienungsanleitung
Maytronics
Maytronics 2x2 Gyro Bedienungsanleitung
Maytronics
Maytronics MCC6 Bedienungsanleitung
Maytronics
Maytronics 8180090 Bedienungsanleitung
Maytronics
Maytronics Dolphin Liberty 200 Bedienungsanleitung
Maytronics
Maytronics Swash CLX Bedienungsanleitung
Maytronics
Maytronics Dolphin M600 Bedienungsanleitung
Maytronics
Maytronics Dolphin Supreme M5 Bedienungsanleitung
Maytronics
Maytronics Dolphin Classic 12+ Bedienungsanleitung
Maytronics
Maytronics Dolphin WAVE 100 Bedienungsanleitung
Maytronics
Maytronics Dolphin Nautilus Bedienungsanleitung
Maytronics
Maytronics Dolphin Basic 4-UNI Bedienungsanleitung
Maytronics
Maytronics Dolphin Wave Bedienungsanleitung
Maytronics
Maytronics Dolphin WAVE 300 XL Bedienungsanleitung
Maytronics
Maytronics Dolphin Explorer E30 Bedienungsanleitung
Maytronics
Maytronics Dolphin S100 Bedienungsanleitung
Maytronics
Maytronics Dolphin Liberty Bedienungsanleitung
Maytronics
Maytronics Dolphin Classic 12 Bedienungsanleitung
Maytronics
Maytronics Dolphin Mass 13 Bedienungsanleitung
Maytronics
Maytronics Pulit E70 Bedienungsanleitung
