MCLA DT700 Bedienungsanleitung
DT700 IP Phone
USER GUIDE
Contact MCLA Computer Support Services Help Desk with
questions: (413) 662-5276
1.
1
1.INTRODUCTION
General
This guide explains how to operate DT Series (DT700) under the following
headings.
CHAPTER 1 INTRODUCTION
Explains the configuration of this guide and
contains the following information.
• Face layout of DT Series
• Keys and Parts of DT Series
• Icon Display
• Menu List
CHAPTER 2 TERMINAL SETUP
Explains the operating procedures for terminal settings
of the DT Series.
CHAPTER 3 BASIC OPERATION
Explains the basic operation of DT Series.
1.
2
CHAPTER 4 FEATURE OPERATION
Explains operating procedures for various DT330/DT730
Telephony Server features.
Face Layout
DT310/710 (2-button without LCD) DT310/710 (6-Button with LCD)
1.
3
1.
4
DT310 (6-Button with LCD) DT330/DT730 (24-Button with LCD)
Note: Security button is equipped on DT730 only. Note: Security button is equipped on DT730 only.
1.
5
DT330/DT730 (32-Button with LCD) DT330/DT730 (DESI Less 8-Button)
Note: Security button is equipped on DT730 only. Note: Security button is equipped on DT730 only.
1.
6
Keys And Parts
DT310/DT710
(2-Button without LCD)
(1) Call Indicator Lamp
Lamp at top corner of DT Series Display flashes
when a call terminates to the terminal. Lamp lights
steadily when a message has been left.
(2) Programmable Keys
These keys can be programmed as Flexible Line
key/Programmable Feature Key by the Telephony
Server Administrator.
When the Telephony Server Administrator sets
“One-Touch Speed Dial key” on the
programmable keys, users can assign any
numbers (ex. Telephone number, etc.) to the key
(up to 24 digits).
* For the assignment of the keys, confirm with the
Telephony Server Administrator.
(3) Recall
Press key to finish the call and hear the dial tone.
(4) Feature
Used to activate any features as terminal setup
functions, etc. and to program One-Touch Speed
Dial Keys.
(5) Redial
(Last Number Call, Speed Calling-Station/Group)
Press key to activate redial feature.
(6) Conf
Press key to establish a three-way conversation.
LED on key lights when key is active.
(7) Answer
When LED on this key is lit, press key to answer a
waiting call.
(8) Mic
Press key to respond hands free. LED on this key
lights during speakerphone operation.
(9) Message
Press key to access the voice mail system.
1.
7
(10) Up/Down
( DOWN UP)
Used to adjust speaker/receiver volume, and
ringer volume.
• Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
(11) Directory
Press key to activate speed calling - system
feature. (PROGRAMMABLE)
(12) Speaker
Controls the built-in speaker which can be used
for Hands Free dialing/monitoring.
LED on key lights when key is active.
(13) Transfer
Allows the station user to transfer established
calls to another station, without attendant
assistance.
(14) Hold
Press this key to place an internal or external
call on hold.
DT330/DT730
(24-button with LCD)
(1) (2)
1.
8
(18) (17) (16) (15)
(1) Security Button (DT730 only)
The user can lock the terminal
preventing unauthorized use.
(2) Call Indicator Lamp
Lamp at top corner of DT Series
Display flashes when a call
terminates to the terminal. Lamp
lights steadily when a message has
been left.
(3) LCD (Note 1)
LCD (Liquid Crystal Display) provides DT Series
activity information plus date, time and Soft Key
Operation.
The LCD on DT310/DT710 has 24-character,
3-line capability.
15:39 AM MON 18 JUL 2007 MIC VOICE >>>
The LCD on DT330/DT730 has 24-character,
4-line capability. Top line is used exclusively for the
status icons.
15:39 AM MON 18 JUL 2007
MIC VOICE >>>
(4) Exit
The user can exit from the Help key mode by
pressing this key.
(5) Soft Keys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling
process.
(6) Help
Explanations of the Soft Keys can be called up on
the LCD by pressing this key.
1.
9
(7) Programmable Keys
These keys can be programmed as
Flexible Line key/Programmable
Feature Key by Telephony Server
Administrator.
When the Telephony Server
Administrator sets “One-Touch
Speed Dial key” on the
programmable keys, users can
assign any numbers (ex. Telephone
number, etc.) to the key (up to 24
digits).
* For the assignment of the keys,
confirm with the Telephony Server
Administrator.
(8) Recall
Press key to finish the call and hear
the dial tone.
(9) Feature
Used to activate any features as
terminal setup functions, etc. and to
program One-Touch Speed Dial
Keys.
(10)Answer
When LED on this key is lit, press
key to answer a waiting call.
(11) Mic
Press key to respond hands free.
LED on this key lights during
speakerphone operation.
(12) Menu
From this key, the user can access to the functions
not normally used (such as terminal settings,
downloads and access to XML applications) easily.
(13) Cursor
By using this Key, DT Series user can access to
various features with simple operation.
- 4-way Scroll UP key- Enter Key
- Volume (UP) key- Shortcut Key
- 4-way Scroll LEFT key - 4-way
Scroll RIGHT key
- Redial key - Directory key
- 4-way Scroll DOWN key- Volume (DOWN) key
Two lines of menu items can be displayed at a
time. Use "Up" or "Down" key to scroll to the item.
Inhaltsverzeichnis
