Medel SAMBA 2 GO Bedienungsanleitung

Business Unit Vibrant

AW50157_3.0 (English CAN)

SAMBA 2 GO

English

Table of contents

Instructions for use

1. Contents of the package........................................................................................... 3

2. General information .................................................................................................. 4

Introduction .......................................................................................................................4

Device description..............................................................................................................4

Compatible audio processors.............................................................................................4

Intended use ......................................................................................................................4

3. Getting started ......................................................................................................... 5

SAMBA 2 GO overview .......................................................................................................5

Charging .............................................................................................................................6

Wearing SAMBA 2 GO ........................................................................................................7

Pairing your audio processor with SAMBA 2 GO ...............................................................8

Adjustments of pre-dened settings.................................................................................9

Switching SAMBA 2 GO on/off......................................................................................... 10

4. Audio streaming........................................................................................................11

Supported devices ............................................................................................................ 11

Pairing Bluetooth devices..................................................................................................12

Audio streaming functions................................................................................................13

5. Making phone calls ..................................................................................................15

Phone call functions .........................................................................................................15

6. Maintenance and service .........................................................................................17

Cleaning ............................................................................................................................17

Unpairing...........................................................................................................................17

Resetting...........................................................................................................................17

7. Further information..................................................................................................18

Operating distance............................................................................................................18

Conguration of your audio processor.............................................................................18

Troubleshooting ................................................................................................................19

8. Warnings and precautions....................................................................................... 20

Warnings ..........................................................................................................................20

Precautions ......................................................................................................................20

9. Miscellaneous........................................................................................................... 21

Technical data ...................................................................................................................21

Warranty statement..........................................................................................................21

Symbols............................................................................................................................ 22

Conformance information................................................................................................ 22

Wireless functionality ......................................................................................................23

10. Quick reference ...................................................................................................... 24

Button overview...............................................................................................................24

LED status indication .......................................................................................................24

Contents of the package

1. Contents of the package

• SAMBA 2 GO

• Neckloop

• Power supply with different adapters

• USB cable for charging

• Sleeve

• Accompanying documents

General information

2. General information

Introduction

These instructions for use cover the use of the SAMBA 2 GO.

Read these instructions for use carefully and completely so that you are familiar with

the use of the product. Do not hesitate to contact your audiologist/healthcare profes‑

sional, clinic or MED‑EL representative with any additional questions you may have.

The following symbols will be used throughout this document:

⚠Information indicating a hazardous situation that, if not avoided, could result in

death or serious injury.

⚠Information indicating a hazardous situation that, if not avoided, could result in

minor injury or inconvenience for the user and/or property damage.

Device description

SAMBA 2 GO is an audio streamer which connects many Bluetooth® (1) wireless technol-

ogy enabled devices, standard audio devices and FM receivers with your SAMBA 2 Audio

Processor (also referred to as “audio processor” in these instructions for use). In addition,

it provides a convenient option to adjust pre-dened settings within a limited range.

Compatible audio processors

SAMBA 2 GO works with your SAMBA 2 Audio Processor.

Intended use

The SAMBA 2 GO provides a convenient option to adjust simple, pre-dened settings of

a compatible MED-EL audio processor within a range determined by a hearing healthcare

professional. In addition, it can also be used for audio streaming.

―

1 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by

MED-EL GmbH is under licenses. Other trademarks and trade names are those of their respective owners.

Getting started

3. Getting started

SAMBA 2 GO overview

①Volume buttons

②Multi-function button

③Microphone openings

④Neckloop (is also the antenna)

⑤USB port for charging

⑥Reset button

⑦Port for FM receiver

⑧Port for audio devices (standard 3.5 mm (0.14 in) audio jack)

⑨LED status indicator (blue, green, orange)

② ③

④

③①

⑧⑥

⑤ ⑦

⑨

Getting started

Charging

NOTE:

Make sure that the power plug is easily accessible to remove it from power supply if

necessary.

Battery status while charging

Steady orange light Charging in progress

Steady green light Charging complete

Battery status while operating

Orange LED off Battery sufciently charged

Flashing fast for 5 seconds when a

button is pressed.

Battery low

Further information

• Only use the USB cable and power adapter that came with the device. Select the

adapter that is used in your country.

• When charging via computer:

– SAMBA 2 GO switches off automatically.

– Your computer must be turned on and not in sleep or standby mode. Otherwise,

the battery may drain instead of charge.

• Typically, fully charging takes two hours.

Getting started

⚠WARNING

There is a risk of explosion when the rechargeable battery is handled in a wrong

w ay.

• Do not open the housing.

• Do not short-circuit, pierce, crush or disassemble the rechargeable battery.

• Do not place it in the oven or re.

• Do not immerse it in water.

• Charge the rechargeable battery between 0 °C (+32 °F) and +45 °C (+113 °F).

• Prior to returning the battery for recycling, tape the electrodes to prevent a

short circuit which may cause the battery to explode.

⚠CAUTION

Protect your device from extreme heat, direct sunlight and high humidity.

Wearing SAMBA 2 GO

In order to function correctly, your SAMBA 2 GO must be worn with the neckloop around

your neck. The neckloop is also the antenna.

①Unplug one neckloop plug and place the neckloop loosely around your neck.

②Insert both neckloop plugs all the way.

⚠WARNING

• Due to the risk of strangulation, children under the age of twelve must not use

the device without adult supervision.

• Only use the delivered neckloop. It will automatically detach when entangled.

• Ensure that the neckloop does not get entangled, e.g. in moving mechanical

parts of machines.

Getting started

Pairing your audio processor with SAMBA 2 GO

Your audio processor has to be paired once with SAMBA 2 GO. After that, the connection is

automatically established when your audio processor and SAMBA 2 GO are switched on.

Preconditions

• Audio processor is switched off (the battery compartment is open) and within operat-

ing distance.

• SAMBA 2 GO is switched off.

• Neckloop is plugged in on both sides, and SAMBA 2 GO is worn around the neck.

Pairing

Press until the green LED turns on: . This takes approximately 2 seconds.

SAMBA 2 GO searches for audio processors nearby: .

Switch on the audio processor while the green LED is ashing: . Close the

battery compartment.

If you are wearing two audio processors, both must be switched on.

Pairing may take several seconds.

Pairing status for audio processor (indicated by green LED)

Flashing, then on for 5

seconds, then off

Pairing is nished. An acoustic signal is

played. You can now use SAMBA 2 GO.

Flashing for 10 minutes, then

off

Audio processor could not be paired. Refer

to section “Troubleshooting”.

When pairing is nished:

• As long as the blue LED is ashing ( ), SAMBA 2 GO is ready to pair with

Bluetooth devices. Refer to section “Pairing Bluetooth devices”.

• SAMBA 2 GO is ready for simple adjustments of pre-dened audio processor settings.

If you want to pair with Bluetooth devices not now, but later on, press .

Andere Handbücher für SAMBA 2 GO

Inhaltsverzeichnis

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung