Megger BITE2 Bedienungsanleitung

BITE / POWER DB 

AVTM82318REV1April17,2012 Page1



Power DB LITE Operation

with the

Megger BITE Battery Testers

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page2



INDEX

SECTION DESCRIPTION PAGE

Section 1.0 Power DB Overview 3

Section 2.0 Power DB LITE Operations 5

Section 3.0 Configuring Communications, Select a Form, Site &

String Data

Section 4.0 Transferring Data from a BITE2/2P Receiver 12

Section 5.0 Transferring Data from a BITE3 21

Section 6.0 Report Generation 29

Section 6.1 Opening a Report 29

Section 6.2 Manually Entering Site Information 32

Section 6.3 Manually Entering Limits 33

Section 6.4 Manually Entering String Data 34

Section 6.5 Manually Entering Charger Data 35

Section 6.6 Creating Charts 36

Section 6.6.1 Bar Charts 37

Section 6.6.2 Show Symbols 37

Section 6.6.3 Show Limits 38

Section 6.7 Calculating Baseline Data 39

Section 6.8 Inputting a New Battery Baseline Value 40

Section 6.9 Viewing Baseline Data 42

Section 7.0 Entering New Battery Cell Data 43

Section 7.1 Entering New Warning & Alarm Limit Values 46

Section 7.2 Selecting a New Battery Cell 49

Section 8.0 Inputting a Company Logo 51

Section 9.0 Transferring Setup Data to the BITE3 53

Section 10.0 Importing a ProActiv Database 55

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page3



SECTION 1.0: POWER DB OVERVIEW

Power DB is a PC based Megger instrument interfacing software, that operates

with multiple Megger units, including Megger’s line of Battery Testing Instrumentation.

Power DB will operate with the BITE2, BITE2P, BITE3, DMA Hydrometer, Torkel and

BVM voltage monitors.

There are 3 versions of the Power DB software, Power DB LITE, Power DB Advanced

and Power DB Pro. Power DB LITE comes with the BITE2, BITE2P and the BITE3 at no

additional charge. The Power DB Advanced and Pro versions are ordered separately

and have associated charges with them.

The Power DB LITE software allows operator to communicate with the BITE2, BITE2P

and BITE3 as well as import data, configure the units, import Hydrometer data, create

reports and charts, configure the reports and charts, configure battery data as well as

import pre-existing ProActiv Databases. The following table illustrates the differences

between the different versions of Power DB.



COMPARISON GUIDE

PowerDB Edition

ONBOARD LITE ADVANCED PRO

Runs in a hardened embedded environment





Navigate with arrow and enter keys (no mouse)





Manage data files with internal drive and USB drive





Uses a subset of PowerDB Pro forms applicable to your

instrument









Files can import into PowerDB Pro













Relay/Breaker/Recloser curve library

















Completed forms are saved as files to your computer

















associates current test data with historical results

















Control Megger instruments and download test data















Control non-Megger instruments











280+ industry standard test forms are provided













www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page4



advanced Relay Form











Trend historical results for asset for predictive failure

analysis 









Trend historical results for asset against other similar

assets







Database functionality to manage data for all electrical

equipment







One step report generation







Summarize noted comments and/or deficiencies







Trigger work order and maintenance schedules







Synchronize results from field to master database







Synchronize results with other testers







Form editor allows test sheets to be created or customized







Import data from other software packages







Maintain calibration data for test instruments







www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page5



SECTION 2.0: POWER DB LITE OPERATIONS

When the Power DB LITE program is executed the following Wizard shall open.

With the Wizard open the operator can select the desired instrument to interface with,

by clicking on the appropriate button or they can choose to open a report by clicking

on the “Open Existing Results File” button or they can chose to close the Wizard by

clicking on the “Cancel” button.

If the operator selects an instrument to interface with the Wizard will then guide the

operator through the communications configuration process.

For the purpose of this document it is going to be assumed that the Wizard has been

closed and the software is operating from the main home screen as shown on the

following page.

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page6



www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page7



SECTION 3.0: CONFIGURING COMMUNICATIONS, SELECT A FORM, SITE &

STRING DATA



To configure the BITE2 or BITE3 communication configuration click on TOOLS in the

main menu bar then click on INSTRUMENT SETUP.

This will re-open the Wizard as shown below.

Select the desired BITE instrument by clicking on the associated button. This will open

the communications configuration screen, as shown below.

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page8



Select the proper serial port that the unit will be connected to. If you are unsure of the

serial port you will be using then click on the DEVICE MANAGER button. This will open

the computers device manager screen as shown below.

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page9



In order to locate the proper serial port, scroll down to PORTS as shown below. Click on

the PLUS button next to “Ports” in order to drop down the menu and view the

communication ports.

Once you know the port you are connecting to then close the device manager screen

and enter that port number in the instrument communications configuration screen of

the Power DB LITE software, then click OK.

The following screen shall open.

www.actoolsupply.com

BITE / POWER DB 

AVTM82318REV1April17,2012 Page10



This is the communications configuration screen for the Hydrometer. Select the proper

serial port that the Hydrometer will be connected to. (Typically, it is the same port the

BITE unit is connecting to) If you are unsure of the serial port you will be using then click

on the DEVICE MANAGER button and locate the appropriate port.

Once the proper port number has been entered click on OK then the following message

will appear.

If you want to IMPORT DATA from the BITE unit then click on YES and follow the

instructions as shown on the screen.

If you do not want to SELECT A FORM to view the data in or UPLOAD SITE &

STRING DATA to a BITE3 then click on NO and the Wizard shall open the following

screen.

www.actoolsupply.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Megger Prüfgeräte Handbücher

Megger

Megger MFT-X1 Bedienungsanleitung

Megger

Megger MFT1800 series Bedienungsanleitung

Megger

Megger SVERKER 900 Bedienungsanleitung

Megger

Megger T22/13B Bedienungsanleitung

Megger

Megger MIT510 Bedienungsanleitung

Megger

Megger MFT1500 Series Bedienungsanleitung

Megger

Megger DET3TA Bedienungsanleitung

Megger

Megger OTS 60PB Bedienungsanleitung

Megger

Megger T 99/1 Bedienungsanleitung

Megger

Megger S1-552/2 Bedienungsanleitung

Megger

Megger TTR300 Bedienungsanleitung

Megger

Megger MEG10-01 Bedienungsanleitung

Megger

Megger TDR2000/3 Bedienungsanleitung

Megger

Megger BMM500 Series Bedienungsanleitung

Megger

Megger HPG AC Series Bedienungsanleitung

Megger

Megger Easyloc RxTx Bedienungsanleitung

Megger

Megger BM15 Bedienungsanleitung

Megger

Megger Vidar Bedienungsanleitung

Megger

Megger MFT-X1 Bedienungsanleitung

Megger

Megger BM121 Bedienungsanleitung

Megger

Megger PAT120 Bedienungsanleitung

Megger

Megger BM220 Series Bedienungsanleitung

Megger

Megger MET1000-DE Bedienungsanleitung

Megger

Megger LT310 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung