Meinberg GPS165XHS Bedienungsanleitung

MANUAL

GPS165XHS

DIN Rail GPS Receiver

5th November 2019

Meinberg Funkuhren GmbH & Co. KG

Table of Contents

1 Imprint 1

2 Safety Hints 2

2.1 Important Safety Instructions and Protective Measures ......................... 2

2.2 Used Symbols ................................................. 3

2.3 Security during Installation ......................................... 5

2.4 Fuse Replacement .............................................. 8

2.5 Protective Conductor- / Ground-Terminal ................................. 9

2.6 Safety during Operation ........................................... 9

2.7 Safety during Maintenance ......................................... 10

2.8 Handling Batteries .............................................. 10

2.9 Antenna Mounting .............................................. 11

2.10 Cleaning and Care .............................................. 11

2.11 Prevention of ESD Damage ......................................... 12

2.12 Return of Electrical and Electronic Equipment .............................. 13

3 Content of the USB stick 14

4 General information about GPS165XHS 15

5 GPS165 Features 17

5.1 Time Zone and Daylight Saving ...................................... 17

5.2 Pulse outputs ................................................. 18

5.3 Asynchronous Serial Ports ......................................... 18

5.4 Time code outputs .............................................. 19

5.4.1 Introduction .............................................. 19

5.4.2 Generated Time Codes ....................................... 19

5.4.3 Time Code Generation ....................................... 20

5.4.4 IRIG Standard Format ....................................... 21

5.4.5 AFNOR Standard Format ..................................... 22

5.4.6 Assignment of CF Segment in IEEE1344 Code ......................... 23

5.5 DCF77 Emulation .............................................. 24

6 Installation 25

6.1 Technical data GPS165 Chassis ...................................... 25

6.2 Power supply ................................................. 25

6.3 Mounting the GPS Antenna ........................................ 26

6.3.1 Antenna Cable: ............................................ 26

6.3.2 Antenna Assembly with Surge Voltage Protection ....................... 27

6.4 Powering Up the System .......................................... 28

7 The Front Panel Layout 29

7.1 Front Panel Connectors GPS165 ...................................... 29

7.2 Power Supply Connector .......................................... 30

7.3 Assignment of the DSUB connectors ................................... 31

7.4 Assignment of the terminal block ...................................... 32

7.5 Status LEDs DMC Connector ....................................... 33

7.6 Time Code AM Output ............................................ 33

7.7 DCF77 Simulated Output .......................................... 34

7.8 GPS Antenna ................................................. 34

8 Technical Speciﬁcations GPS165 receiver 35

8.1 Technical Speciﬁcations GPS Antenna .................................. 37

8.2 Connection Data DFMC-connector .................................... 38

8.3 Oscillator speciﬁcations ........................................... 39

8.4 Time Strings .................................................. 40

8.4.1 Format of the Meinberg Standard Time String ......................... 40

8.4.2 Format of the SAT Time String .................................. 41

8.4.3 Format of the NMEA 0183 String (RMC) ............................ 42

8.4.4 Format of the NMEA 0183 String (GGA) ............................ 43

8.4.5 Format of the NMEA 0183 String (ZDA) ............................. 44

8.4.6 Format of the Uni Erlangen String (NTP) ............................ 45

8.4.7 Format of the Computime Time String .............................. 47

8.4.8 Format of the SYSPLEX-1 Time String ............................. 48

8.4.9 Format of the SPA Time String .................................. 49

8.4.10 Format of the RACAL standard Time String ........................... 50

8.4.11 Format of the Meinberg GPS Time String ............................ 51

8.4.12 Format of the ION Time String .................................. 52

8.4.13 Format of the ION Blanked Time String ............................. 53

8.4.14 Format of the IRIG J Time String ................................. 54

9 Meinberg Device Manager 55

10 EU Declaration of Conformity 57

Date: 5th November 2019 GPS165XHS

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont / Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Internet: https://www.meinbergglobal.com

Mail: [email protected]

Date: 2019-01-24

GPS165XHS Date: 5th November 2019 1

2 Safety Hints

2.1 Important Safety Instructions and Protective Measures

The following safety instructions must be respected in all operating and installation phases of the device. Non-

observance of safety instructions, or rather special warnings and operating instructions in product manuals,

violates safety standards, manufacturer instructions and proper usage of the device. Meinberg Funkuhren shall

not be responsible for any damage arising due to non-observance of these regulations.

Depending on your device or the installed options

some information is not valid for your device.

The device satisﬁes the requirements of the following EU regulations: EMC-Directive,

Low Voltage Directive, RoHS Directive and - if applicable - the Radio Equipment Directive.

If a procedure is marked with the following signal words, you may only continue, if you have understood and

fulﬁlled all requirements. In this documentation dangers and indications are classiﬁed and illustrated as follows:

DANGER!

The signal word indicates an imminently hazardous situation with a high risk level . This notice

draws attention to an operating procedure or similar proceedings, of which a non-observance may

result in serious personal injury or death .

WARNING!

The signal word indicates a hazard with a medium risk gradient . This notice draws attention to an

operating procedure, a procedure or the like which, if not followed, can lead to serious injuries ,

possibly resulting in death .

CAUTION!

The signal word indicates a hazard with a low risk gradient . This notice draws attention to an

operating procedure, a procedure or the like which, if not followed, can lead to minor injuries .

ATTENTION!

This notice draws attention to an operating procedure, a procedure or the like which, if not followed,

can cause damage to the product or loss of important data .

2 Date: 5th November 2019 GPS165XHS

2 Safety Hints

2.2 Used Symbols

The following symbols and pictograms are used in this manual. To illustrate the source of danger, pictograms

are used, which can occur in all hazard classes.

Symbol

Beschreibung / Description

IEC 60417-5031

Gleichstrom / Direct current

IEC 60417-5032

Wechselstrom / Alternating current

IEC 60417-5017

Erdungsanschluss / Earth (ground) terminal

IEC 60417-5019

Schutzleiteranschluss / Protective earth (ground) terminal

ISO 7000-0434A

Vorsicht / Caution

IEC 60417-6042

Vorsicht, Risiko eines elektrischen Schlages / Caution, risk of electric shock

IEC 60417-5041

Vorsicht, heiße Oberfläche / Caution, hot surface

IEC 60417-6056

Vorsicht, Gefährlich sich bewegende Teile / Caution, moving fan blades

IEC 60417-6172

Trennen Sie alle Netzstecker / Disconnection, all power plugs

IEC 60417-5134

Elektrostatisch gefährdete Bauteile / Electrostatic Sensitive Devices

IEC 60417-6222

Information generell / Information general

2012/19/EU

Dieses Produkt fällt unter die B2B Kategorie. Zur Entsorgung muss es an den

Hersteller übergeben werden.

This product is handled as a B2B category product. In order to secure a WEEE

compliant waste disposal it has to be returned to the manufacturer.

GPS165XHS Date: 5th November 2019 3

The manuals for a product are included in the scope of delivery of the device on a USB stick. The manuals can

also be obtained via the Internet. Enter www.meinbergglobal.com into your browser, then enter the correspond-

ing device name in the search ﬁeld at the top.

This manual contains important safety instructions for the installation and operation of the

device. Please read this manual completely before using the unit.

This device may only be used for the purpose described in this manual. In particular, the given

limits of the device must be observed. The safety of the installation in which the unit is

integrated is the responsibility of the installer!

Non-observance of these instructions can lead to a reduction in the safety of this device!

Please keep this manual in a safe place.

This manual is intended exclusively for electricians or persons trained by an electrician who are familiar with

the applicable national standards and safety rules. Installation, commissioning and operation of this device may

only be carried out by qualiﬁed personnel.

4 Date: 5th November 2019 GPS165XHS

2 Safety Hints

2.3 Security during Installation

WARNING!

Preparing for Commissioning

This built-in unit, has been designed and examined according to the requirements of the standard

IEC 60950-1 „Information Technology Equipment - Safety".

When the built-in unit is used in a terminal (e.g., housing cabinet), additional requirements

according to Standard IEC 60950-1 must be observed and complied with. In particular, the general

requirements and the safety of electrical equipment (such as IEC, VDE, DIN, ANSI) as well as the

applicable national standards are to be observed.

The device has been developed for use in the industrial sector as well as in residential areas and

can only be used in such environments. For environments with higher levels of soiling, additional

measures, e.g. Installation in an air-conditioned control cabinet required.

Transport, Unpacking, Installation

If the unit is brought into the operating room from a cold environment, condensation may occur,

wait until the unit is temperature-controlled and absolutely dry before operating it.

When unpacking, setting up, and before operating the equipment, be sure to read the information on

the hardware installation and the speciﬁcations of the equipment. These include, for example,

dimensions, electrical characteristics, and necessary ambient and climatic conditions, etc.

The ﬁre protection must be ensured in the installed state.

For mounting, the housing must not be damaged. No holes may be drilled in the housing.

For safety reasons, the device with the highest mass should be installed in the lowest position of

the rack. Other devices must be placed from the bottom to the top.

The device must be protected against mechanical stress such as vibration or shock.

GPS165XHS Date: 5th November 2019 5

Connecting Data Cables

During a thunderstorm, data transmission lines must not be connected or disconnected (risk of

lightning).

When wiring the devices, the cables must be connected or disconnected in the order of the

arrangement described in the user documentation accompanying the device. Always attach all cables

to the plug during connection and removal. Never pull the cable itself. Pulling the cable can cause

the cables to disconnect from the plug.

Install the cables in way that they do not constitute a hazard (danger of tripping) and are not

damaged, i.e. kinked.

Connecting Power Supply

This equipment is operated at a hazardous voltage. Non-observance of the safety instructions in this

manual may result in serious personal injury or property damage.

Before connecting to the power supply, a grounding cable must be connected to the earth connection

of the device.

Before operation, check that all cables and lines work properly and are undamaged. Pay particular

attention to the facts that the cables do not have kinks or that they are not too short around corners,

and no objects are placed on the cables. Also make sure that all connections are secure.

Faulty shielding or cabling will endanger your health (electrical shock) and may destroy other

equipment.

Ensure that all necessary safety precautions have been taken. Make all connections to a unit before

turning on the power. Observe the safety instructions on the device (see safety symbols).

The metal housing of the device is grounded. It must be ensured that enough air and creepage

distances to neighboring voltage-carrying parts are provided during assembly in the control cabinet

and no short circuits are caused.

In the case of malfunctions or servicing (e.g. in the event of a damaged housing or power cable or

when ﬂuids or foreign objects enter), the current ﬂow can be interrupted. Questions about the

house installation, need to be clariﬁed with your house administration.

The power supply should be connected with a short, low-inductance line.

6 Date: 5th November 2019 GPS165XHS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Meinberg GPS Handbücher

Meinberg

Meinberg GPS170SV Bedienungsanleitung

Meinberg

Meinberg ADU/GPS-1-12 Bedienungsanleitung

Meinberg

Meinberg GPS180SV Bedienungsanleitung

Meinberg

Meinberg GPS170SV Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung

Garmin

Garmin GPSMAP 78 series Bedienungsanleitung