Meinberg SyncFire 1500 Bedienungsanleitung

MANUAL

SyncFire 1500

High-Performance NTP Server

September 7, 2023

Meinberg Funkuhren GmbH & Co. KG

Front view (Frontansicht) SyncFire 1500

3. USB 3.0 port

6. Status LEDs: Ref. Time, Time Service, Network, Alarm

5. Function buttons: 4-way navigation; F1, F2, OK, ESC

4. LC-Display, 4 x 20 characters

English

2. 8P8C (RJ45) connector for serial (RS-232) terminal connection

1. Power On button

5. Funktionstasten: 4-Wege-Navigation; F1, F2, OK, ESC

4. LC-Display, 4 x 20 Zeichen

Deutsch

6. Status-LEDs: Ref. Time, Time Service, Network, Alarm

1. Einschalttaste

2. 8P8C (RJ45)-Anschluss für serielle (RS-232) Terminalverbindung

3. USB 3.0-Anschluss

1 2 3 456

NORMAL OPERATION

NTP: Offs. +0us

Thu, 20.07.2023

UTC 12:00:00

Rear view (Rückansicht) SyncFire 1500

English

4. Network Expansion Option

5. Network connectors 10/100/1000BASE-T

3. USB 3.0 port

1. Power supply bay (redundant power supplies)

2. Display Port 1.2

Sync Input Option

7. Network management port (disabled)

AM time code output (IRIG, AFNOR NF S87-500, IEC 37.118)

6. GPS or GNS receiver with

Deutsch

4. Netzwerk-Erweiterungsoption

Optionaler Sync-Eingang

5. Netzwerkanschlüsse 10/100/1000BASE-T

6. GPS- oder GNS-Empfänger mit

AM-Zeitcode-Ausgang (IRIG, AFNOR NF S87-500, IEC 37.118)

3. USB 3.0-Anschluss

7. Netzwerk-Management-Anschluss (nicht verbunden)

2. Display Port 1.2

1. Netzteilanschluss (redundante Netzgeräte)

1 2 3 4567

MGMT

NOT USABLE

Table of Contents

1 Imprint 1

2 Copyright and Liability Exclusion 2

3 Presentation Conventions in this Manual 3

3.1 Conventions for the Presentation of Critical Safety Warnings . . . . . . . . . . . . . . . . . . . . 3

3.2 Secondary Symbols Used in Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.3 Conventions for the Presentation of Other Important Information . . . . . . . . . . . . . . . . . . 4

3.4 GenerallyApplicableSymbols ...................................... 4

4 Important Safety Information 5

4.1 AppropriateUsage ............................................. 5

4.2 ProductDocumentation........................................... 6

4.3 SafetywhenInstallingtheDevice .................................... 7

4.4 ElectricalSafety............................................... 8

4.4.1 Special Information for Devices with AC Power Supply . . . . . . . . . . . . . . . . . . . 10

4.4.2 Special Information for Devices with DC Power Supply . . . . . . . . . . . . . . . . . . . 10

4.5 Safety when Handling SFP Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.6 Safety when Maintaining and Cleaning the Device . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.7 BatterySafety................................................ 11

5 Important Product Information 12

5.1 CEMarking ................................................. 12

5.2 UKCAMarking ............................................... 12

5.3 Ensuring the Optimum Operation of Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.4 MaintenanceandModiﬁcations...................................... 13

5.4.1 ReplacingtheBattery....................................... 13

5.5 Disposal ................................................... 14

6 Introduction SyncFire 1500 15

6.1 WhyUseaNetworkTimeServer? .................................... 16

7 Installation of the GNSS Antennas 17

7.1 SelectingtheAntennaLocation...................................... 17

7.2 Installation of the GPSANTv2 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

7.3 Installation of the GNS L1 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

7.4 AntennaCable................................................ 22

7.5 SurgeProtectionandGrounding ..................................... 26

8 SyncFire 1500 Indicators and Function Keys on the Front Panel 31

9 SyncFire 1500 Rear Connectors 33

10 Booting the System for the First Time 35

11 Initialization Process of the GPS Receiver 36

12 Conﬁguration and Monitoring via the WebUI 37

12.1 Initial Conﬁguration via Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

12.1.1 NetworkInterfaces......................................... 39

12.1.2 Clock-TimeZone ......................................... 40

12.1.3 Clock-Miscellaneous....................................... 41

13 Technical Appendix 42

13.1 Technical Speciﬁcations: SyncFire 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

13.2 1000BASE-T Gigabit Network Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

13.3 10GigabitSFP+.............................................. 45

13.3.1 SFPTransceiver .......................................... 46

13.4 Antenna Input: GPS Reference Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

13.5 Antenna Input: GNSS Reference Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

13.6 TimeCodeAMOutput........................................... 49

13.7 Oreganosyn1588PCIeNIC........................................ 50

13.8 Technical Speciﬁcations: GPSANTv2 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

13.9 Technical Speciﬁcations: 40 dB Multi GNSS Antenna . . . . . . . . . . . . . . . . . . . . . . . . 53

13.10 Technical Speciﬁcations: RV-76G GPS/GLONASS Antenna for Mobile Applications . . . . . . 54

13.11 Technical Speciﬁcations: MBG-S-PRO Surge Protector . . . . . . . . . . . . . . . . . . . . . . . 55

13.12 HowSatelliteNavigationWorks ..................................... 56

13.12.1 Time Zones and Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

13.13 General Information about Time Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

13.13.1 Description of IRIG-Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

13.13.2IRIGStandardFormat....................................... 58

13.13.3AFNORStandardFormat..................................... 59

14 RoHS Conformity 60

Date: September 7, 2023 SyncFire 1500

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont, Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Website: https://www.meinbergglobal.com

Email: [email protected]

Date: September 7, 2023

Manual

Version: 1.0

SyncFire 1500 Date: September 7, 2023 1

2 Copyright and Liability Exclusion

Except where otherwise stated, the contents of this document, including text and images of all types and transla-

tions thereof, are the intellectual property and copyright of Meinberg Funkuhren GmbH & Co. KG (“Meinberg”

in the following) and are subject to German copyright law. All reproduction, dissemination, modiﬁcation, or ex-

ploitation is prohibited unless express consent to this eﬀect is provided in writing by Meinberg. The provisions

of copyright law apply accordingly.

Any third-party content in this document has been included in accordance with the rights and with the consent

of its copyright owners.

A non-exclusive license is granted to redistribute this document (for example, on a website oﬀering free-of-

charge access to an archive of product manuals), provided that the document is only distributed in its entirety,

that it is not modiﬁed in any way, that no fee is demanded for access to it, and that this notice is left in its

complete and unchanged form.

At the time of writing of this document, reasonable eﬀort was made to carefully review links to third-party

websites to ensure that they were compliant with the laws of the Federal Republic of Germany and relevant

to the subject matter of the document. Meinberg accepts no liability for the content of websites not created or

maintained by Meinberg, and does not warrant that the content of such external websites is suitable or correct

for any given purpose.

While Meinberg makes every eﬀort to ensure that this document is complete, suitable for purpose, and free

of material errors or omissions, and periodically reviews its library of manuals to reﬂect developments and

changing standards, Meinberg does not warrant that this speciﬁc document is up-to-date, comprehensive, or

free of errors. Updated manuals are provided at www.meinbergglobal.com and

www.meinberg.support.

You may also write to [email protected] to request an updated version at any time or provide feedback

on errors or suggested improvements, which we are grateful to receive.

Meinberg reserves the right to make changes of any type to this document at any time as is necessary for

the purpose of improving its products and services and ensuring compliance with applicable standards, laws &

regulations.

2 Date: September 7, 2023 SyncFire 1500

3 Presentation Conventions in this Manual

3.1 Conventions for the Presentation of Critical Safety Warnings

Warnings are indicated with the following warning boxes, using the following signal words, colors, and symbols:

Caution!

This signal word indicates a hazard with a low risk level. Such a notice refers to a procedure or other

action that may result in minor injury if not observed or if improperly performed.

Warning!

This signal word indicates a hazard with a medium risk level. Such a notice refers to a procedure or

other action that may result in serious injury or even death if not observed or if improperly performed.

Danger!

This signal word indicates a hazard with a high risk level. Such a notice refers to a procedure or

other action that will very likely result in serious injury or even death if not observed or if improperly

performed.

3.2 Secondary Symbols Used in Safety Warnings

Some warning boxes may feature a secondary symbol that emphasizes the deﬁning nature of a hazard or risk.

The presence of an "electrical hazard" symbol is indicative of a risk of electric shock or

lightning strike.

The presence of a "fall hazard" symbol is indicative of a risk of falling when performing

work at height.

This "laser hazard" symbol is indicative of a risk relating to laser radiation.

SyncFire 1500 Date: September 7, 2023 3

3.3 Conventions for the Presentation of Other Important Information

Beyond the above safety-related warning boxes, the following warning and information boxes are also used

to indicate risks of product damage, data loss, and information security breaches, and also to provide general

information for the sake of clarity, convenience, and optimum operation:

Important!

Warnings of risks of product damage, data loss, and also information security risks are indicated with

this type of warning box.

Information:

Additional information that may be relevant for improving eﬃciency or avoiding confusion or misunder-

standings is provided in this form.

3.4 Generally Applicable Symbols

The following symbols and pictograms are also used in a broader context in this manual and on the product.

The presence of the "ESD" symbol is indicative of a risk of product damage caused by

electrostatic discharge.

Direct current (DC) (symbol deﬁnition IEC 60417-5031)

Alternating current (AC) (symbol deﬁnition IEC 60417-5032)

Ground connection (symbol deﬁnition IEC 60417-5017)

Protective earth connection (symbol deﬁnition IEC 60417-5019)

4 Date: September 7, 2023 SyncFire 1500

Inhaltsverzeichnis

Andere Meinberg Server Handbücher

Meinberg

Meinberg IMS-LANTIME M4000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M300/MGR Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg IMS-LANTIME M500 Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME-M1000 Bedienungsanleitung

Meinberg

Meinberg LANTIME/SHS/BGT Bedienungsanleitung

Meinberg

Meinberg LANTIME IMS-M500 Bedienungsanleitung

Meinberg

Meinberg SyncFire 1200 Bedienungsanleitung

Meinberg

Meinberg LANTIME M600 MRS Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME M300/TCR Bedienungsanleitung

Meinberg

Meinberg LANTIME M900/GPS/LNE/RPS/BGT Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M100/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M300/GPS Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME M3000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M600/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Bedienungsanleitung

Meinberg

Meinberg LANTIME M100 Bedienungsanleitung

Meinberg

Meinberg IMS LANTIME M3000 Bedienungsanleitung

Meinberg

Meinberg IMS - LANTIME M3000S Bedienungsanleitung

Meinberg

Meinberg SyncFire 1200 Bedienungsanleitung

Meinberg

Meinberg LANTIME M150/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync HR100/DC Gebrauchs- und Pflegehandbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung