Meinberg SyncFire 1200 Bedienungsanleitung

MANUAL

SyncFire 1200

High performant NTP Server

August 8, 2022

Meinberg Funkuhren GmbH & Co. KG

Front view (Frontansicht) SyncFire 1200

1. Function buttons: 4-way navigation; F1, F2, OK, ESC

8. USB 3.0 port

2. Status LEDs: Ref. Time, Time Service, Network, Alarm

6. NIC status LED

5. Health LED

4. Power On/Standby button and system power LED

3. LC-Display, 4 x 20 characters

7. UID button/LED

English

4 5 6 7 81 2 3

7. UID-Button / LED

8. USB 3.0 Anschlussport

6. NIC-Status-LED

4. Power On / Standby-Button und System-Power-LED

5. Health-LED

1. Funktionstasten: 4-Richtungs-Navigation - F1, F2, OK, ESC

Deutsch

2. Status LEDs: Ref. Time, Time Service, Network, Alarm

3. LC-Display, 4 x 20 Zeichen

Rear view (Rückansicht) SyncFire 1200

English

2. VGA port (standard operation)

1. Network connectors 10/100/1000BASE-T

6. Power supply bay (redundant power supplies)

5. USB 3.0 ports

4. Network management port

3. GPS or GNS receiver Option: additional network ports 10GBASE SFP

500W

5 1

1 2 4 653

5. USB 3.0 Anschlüsse

6. Stromanschluss (redundante Netzteile)

4. Netzwerk-Management-Port

3. GPS- oder GNS-Empfänger

1. Netzwerkanschlüsse 10/100/1000BASE-T

2. VGA-Port (Standard-Betrieb)

Deutsch

Table of Contents

1 Imprint 1

2 Safety instructions for building-in equipment 2

2.1 Important Safety Information and Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 UsedSymbols................................................. 4

2.3 ProductDocumentation ........................................... 5

2.4 SecurityduringInstallation......................................... 6

2.5 SafetyDuringOperation .......................................... 9

2.6 SafetyDuringMaintenance......................................... 10

2.7 HandlingofBatteries ............................................ 11

2.8 CleaningandCare.............................................. 12

2.9 PreventionofESDDamage......................................... 12

2.10 Return of Electrical and Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 The Modular System SyncFire 1200 14

3.1 NetworkConﬁgurationConcept ...................................... 15

3.2 Why to use a Network Time Server? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4 Before you start 17

4.1 TextandSyntaxConventions........................................ 17

4.2 RequiredTools ................................................ 18

4.3 AbbreviationList ............................................... 19

5 Installation of the GPS Antenna 20

6 Technical Appendix: GPS Antenna + Accessories 25

6.1 Technical Speciﬁcations: Antenna Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.2 AntennaShortCircuit ............................................ 27

6.3 Technical Speciﬁcations: MBG S-PRO Surge Protection . . . . . . . . . . . . . . . . . . . . . . . 28

6.3.1 MBG S-PRO: Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.3.2 InstallationandGrounding..................................... 30

7 Information GNSS Antennas 31

7.1 Installation of the Multi-GNSS Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

8 Quick Start 35

9 Booting the GNSS Receiver 36

10 Indicators and Function Keys on the Front Panel 37

10.1ControlElements............................................... 38

11 Available Interfaces for Conﬁguration and Monitoring 39

12 Attachment: Technical Information 41

12.1 Technical Speciﬁcations SyncFire 1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

12.2RearPanelConnectors ........................................... 42

12.3 1000BASE-T Gigabit Network Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

12.410GigabitSFP+............................................... 43

12.5 Antenna Input: GPS Reference Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

12.6 Antenna Input: GNSS Reference Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

12.7TimeCodeAMOutput............................................ 46

13 RoHS and WEEE 47

Date: August 8, 2022 SyncFire 1200

14 Declaration of Conformity 48

SyncFire 1200 Date: August 8, 2022 1

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont, Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Website: https://www.meinbergglobal.com

Email: [email protected]

Date: August 8, 2022

2 Date: August 8, 2022 SyncFire 1200

2 Safety instructions for building-in equipment

The SyncFire 1200 cannot operate as a standard server. Meinberg’s SyncFire 1200 was developed to operate

as a powerful NTP time server and does not provide the needed operation system to be deployed as a standard

server.

Make sure that the server is acclimatized for the time indicated in this table before putting it into oper-

ation:

Temperature

Temperature difference

Minimum acclimatization time

Operating / Non operating

20 °C (36 °F)

60 minutes

Altitude

Altitude change rate

Minimum acclimatization time

Operating / Non operating

457 m (1500 ft)

1 minute

SyncFire 1200 Date: August 8, 2022 3

2.1 Important Safety Information and Safety Precautions

The following safety information must be observed whenever the device is being installed or operated. Failure

to observe this safety information and other special warnings or operating instructions in the product manuals

constitutes improper usage and may violate safety standards and the manufacturer’s requirements.

Depending on the conﬁguration of your device or installed options, some information may

not speciﬁcally apply to your device.

The device satisﬁes the requirements of the following EU regulations: EMC Directive,

Low Voltage Directive, RoHS Directive and—where applicable—the Radio Equipment Directive.

If a procedure is marked with the following signal words, you may only proceed with it if you have understood

and fulﬁlled all requirements. Hazard notices and other relevant information are classiﬁed and indicated as

such in this manual according to the following system:

DANGER!

This signal word indicates a hazard with a high risk level . Such a notice refers to a procedure

or other action that will very likely result in serious injury or even death if not observed or

if improperly performed.

WARNING!

This signal indicates a hazard with a medium risk level . Such a notice refers to a procedure or

other action that may result in serious injury or even death if not observed or if improperly

performed.

CAUTION!

This signal word indicates a hazard with a low risk level . Such a notice refers to a procedure or

other action that may result in minor injury if not observed or if improperly performed.

ATTENTION!

This signal word refers to a procedure or other action that may result in product damage or the

loss of important data if not observed or if improperly performed.

4 Date: August 8, 2022 SyncFire 1200

2 Safety instructions for building-in equipment

2.2 Used Symbols

The following symbols and pictograms are used in this manual. Pictograms are used in particular to indicate

potential hazards in all hazard categories.

Symbol

Beschreibung / Description

IEC 60417-5031

Gleichstrom / Direct current

IEC 60417-5032

Wechselstrom / Alternating current

IEC 60417-5017

Erdungsanschluss / Earth (ground) terminal

IEC 60417-5019

Schutzleiteranschluss / Protective earth (ground) terminal

ISO 7000-0434A

Vorsicht / Caution

IEC 60417-6042

Vorsicht, Risiko eines elektrischen Schlages / Caution, risk of electric shock

IEC 60417-5041

Vorsicht, heiße Oberfläche / Caution, hot surface

IEC 60417-6056

Vorsicht, Gefährlich sich bewegende Teile / Caution, moving parts

IEC 60417-6172

Trennen Sie alle Netzstecker / Disconnect all power connectors

IEC 60417-5134

Elektrostatisch gefährdete Bauteile / Electrostatic Discharge Sensitive Devices

IEC 60417-6222

Information generell / General information

2012/19/EU

Dieses Produkt fällt unter die B2B Kategorie. Zur Entsorgung muss es an den

Hersteller übergeben werden.

This product is handled as a B2B-category product. To ensure that the product is

disposed of in a WEEE-compliant fashion, it must be returned to the manufacturer.

SyncFire 1200 Date: August 8, 2022 5

Andere Handbücher für SyncFire 1200

Inhaltsverzeichnis

Andere Meinberg Server Handbücher

Meinberg

Meinberg LANTIME M300 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M100 Bedienungsanleitung

Meinberg

Meinberg IMS-M3000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M300 Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME M4000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M600 MRS Bedienungsanleitung

Meinberg

Meinberg microSync HR100/DC Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME/SHS/BGT Bedienungsanleitung

Meinberg

Meinberg IMS-LANTIME-M1000 Bedienungsanleitung

Meinberg

Meinberg LANTIME M400 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg IMS-M4000 Bedienungsanleitung

Meinberg

Meinberg IMS-M1000-S Bedienungsanleitung

Meinberg

Meinberg LANTIME M200/GPS/RPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg LANTIME M300/GPS Bedienungsanleitung

Meinberg

Meinberg M900 Bedienungsanleitung

Meinberg

Meinberg LANTIME M100 Bedienungsanleitung

Meinberg

Meinberg LANTIME M100/GPS Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg IMS - LANTIME M3000S Bedienungsanleitung

Meinberg

Meinberg SyncFire 1200 Bedienungsanleitung

Meinberg

Meinberg SyncFire 1500 Bedienungsanleitung

Meinberg

Meinberg LANTIME M600/GPS Bedienungsanleitung

Meinberg

Meinberg LANTIME M300/MGR Bedienungsanleitung

Meinberg

Meinberg LANTIME CPU Expansion Shelf Bedienungsanleitung

Meinberg

Meinberg LANTIME M100 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung