Mellanox Technologies MIS5035Q-2SFC Bedienungsanleitung

Document no. 3405

Mellanox Technologies Confidential

http://www.mellanox.com

Dismantling Guide

OPNs: MIS 50[23][015][DQ]

Rev. 1.0

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

2 of 10

NOTE:

THIS EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

MELLANOX BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS HARDWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Mellanox Technologies, Inc.

350 Oakmead Parkway Suite

100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox

Technologies Ltd

PO Box 586

Hermon Building

Yokneam 20692

Israel

Tel: +972-4-909-

7200

Fax: +972-4-959-

3245

Mellanox®, BridgeX®, ConnectX®, InfiniBlast®, InfiniBridge®, InfiniHost®,

InfiniRISC®, InfiniScale®, InfiniPCI®, PhyX® and Virtual Protocol Interconnect® are

registered trademarks of Mellanox Technologies, Ltd. CORE-Direct and FabricIT are

trademarks of Mellanox Technologies, Ltd.

All other marks and names mentioned herein may be trademarks of their respective

companies.

Contact Information

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

3 of 10

Should you have any questions regarding our Products, please feel free to contact us directly or contact our

local distributors.

Mellanox Technologies Call Center

Tel: +

Email: Mellanox_WEEE@mellanox.com

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

4 of 10

Table of Contents

Revision .......................................................................................................................................... 5

Preface............................................................................................................................................. 5

Switch OPNs................................................................................................................................... 5

Policy Statement ............................................................................................................................. 6

1Dismantling Instructions......................................................................................................... 7

1.1 InfiniBand switch system systems - General.................................................................. 7

1.2 General Preparations....................................................................................................... 7

1.3 Standard and Short InfiniBand Switch Systems............................................................. 7

1.4 Power Supply Unit Extraction........................................................................................ 8

1.5 Fan Unit Extraction......................................................................................................... 9

1.6 Cover Extraction............................................................................................................. 9

1.7 Battery Extraction........................................................................................................... 9

1.8 Board Extraction........................................................................................................... 10

1.9 Harness Extraction........................................................................................................ 10

List of Tables

Table 1: Revision ...................................................................................................................... 5

Table 2: Switch OPNs for this Procedure................................................................................. 5

Table of Figures

Figure 1 Short vs. Standard Switch........................................................................................... 8

Figure 2 Power Side of the Switch............................................................................................ 8

Figure 3 PSU Pulled Out........................................................................................................... 8

Figure 4 Extracting the Fan Unit............................................................................................... 9

Figure 5 Remove Battery .......................................................................................................... 9

Figure 6 Remove Heat Sink and Boards................................................................................. 10

Figure 7 Remove Harnesses.................................................................................................... 10

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

5 of 10

Revision

Table 1: Revision

Revision

Date

1.0

Oct. 2010

Preface

This manual is intended as a reference for dismantling MIS 50[23] [015][QD]

switch systems in preparation of meeting the requirements of WEEE recycling.

Intended Audience

This manual is intended for technicians who dismantle the switch systems as a

reference for WEEE recyclers.

Mellanox Technologies emphasizes the importance of carefully following all

procedures described in this guide to prevent personal injury.

Switch OPNs

This document is valid for all of the switch OPNs listed in Table 2.

Table 2: Switch OPNs for this Procedure

MIS5035Q-2SFC

MIS5035Q-1SFC

MIS5035Q-1BFC

MIS5035D-1SFC

MIS5035D-1BFC

MIS5031Q-1SFC

MIS5031Q-1BRC

MIS5031Q-1BFC

MIS5031D-1BRC

MIS5031D-1BFC

MIS5030Q-2SFC

MIS5030Q-2BRC

MIS5030Q-1SFR

MIS5030Q-1SFC

MIS5030Q-1BRC

MIS5030Q-1BFC

MIS5030D-2SFC

MIS5025Q-2BRC

MIS5025Q-1SRC

MIS5025Q-1SFC

MIS5025Q-1BRC

MIS5025Q-1BFC

MIS5025D-1SFC

MIS5025D-1BRC

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

6 of 10

Policy Statement

Mellanox Technologies recognizes the importance of developing connectivity

solutions that not only enable our customers to optimize their data centers

performance, but also protect the environment and ensure that future generations

enjoy its bounties. Mellanox Technologies is committed, therefore, to meeting the

requirements of the European Union’s WEEE (waste electrical and electronic

equipment) directive. The directive mandates how the materials used in electrical

and electronic equipment must be disposed of.

Mellanox Technologies has worked closely with its suppliers to eliminate

hazardous materials from its Products. There are instances, however, where it has

not proven possible to completely eliminate all hazardous materials.

Consequently, all applicable products are labeled with a crossed out “wheelie” bin

symbol, indicating that special care must be applied to their disposal and / or

recycling.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

7 of 10

1Dismantling Instructions

This chapter provides detailed instructions for dismantling the InfiniBand switch

Standard and Short systems. Follow the instructions in the order they are

presented.

1.1 InfiniBand switch systems - General

The InfiniBand switch system complies with the RoHS directive under the

exemptions known as RoHS-5 and RoHS-6.

The last digit of the product part number represents the RoHS type.

For example

MIS5030Q-2BRC —C = RoHS-5

MIS5030Q-1SFR —R = RoHS-6

InfiniBand switch systems are comprised of:

Main Board

CPU board with battery

Fan unit

Harness

Power Supply Unit (PSU)

Cover

1.2 General Preparations

The InfiniBand switch system is assembled using Philips screws, and handles

with snap in latches for modules.

To disassemble the InfiniBand switch system you will need a small Philips

screwdriver.

The pictures displayed in the following pages provide visual guidance explaining

how to remove the modules from the mechanical base.

1.3 Standard and Short InfiniBand Switch Systems

There are two types of InfiniBand switch systems.

Standard

Short

The difference is in the length of the mechanical base and cover.

In the following pictures and drawings you will see the difference.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

8 of 10

Figure 1 Short vs. Standard Switch

For InfiniBand switch systems (standard and short), all parts are the same

regarding the disassembly process. The only difference is that the standard

version of the switch has several extra harnesses that connect the board to the fan

and power modules.

1.4 Power Supply Unit Extraction

Figure 2 Power Side of the Switch

Mellanox !!

OK !

I2C

Figure 3 PSU Pulled Out

Fan Unit

Power Side

Mellanox

PSU1

To extract a PSU:

1. Remove the power cord from the power supply unit.

2. Grasping the handle with your right hand, push the latch release with your thumb

while pulling the handle outward.

3. Remove the PSU.

4. Repeat the procedure to the second PSU if there is one.

5. If there is only one PSU remove the blank cover.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

9 of 10

1.5 Fan Unit Extraction

To extract a Fan Unit

Using two hands, push both latch releases simultaneously while pulling the fan

module out of the switch.

Figure 4 Extracting the Fan Unit

Mellanox !!

OK !

I2C

6. These two latches must be pushed towards each other at the same time while the

module is pulled out.

1.6 Cover Extraction

1. Unscrew all of the screws from the top and sides of the cover and remove the cover.

1.7 Battery Extraction

In all managed Mellanox systems there is a CPU board and / or Management

board, there is a: COIN TYPE LITHIUM BATTERY CR1620 3V 75MA.

Figure 5 Remove Battery

1. Remove the battery before removing the board.

Remove the

battery

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

10 of 10

1.8 Board Extraction

1. Disconnect the harness connectors from the boards.

2. Unscrew the Heat-sink screws to remove the Heat-sink.

3. Unscrew the Philips screws and remove spacers to remove the Main board and CPU

Board.

Figure 6 Remove Heat Sink and Boards

1.9 Harness Extraction

Disconnect harness connectors and remove Harnesses from the base.

Figure 7 Remove Harnesses

These are four

harnesses that

are in the

standard

switches.

Main board

Heat sink

Management board

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mellanox Technologies Schalten Handbücher

Mellanox Technologies

Mellanox Technologies MSX6536-10R Handbuch

Mellanox Technologies

Mellanox Technologies SX1710 Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies MTS3600 Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies InfiniScale MTS3600Q-1UNC Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies InfiniScale MTS3600Q-1BNC Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies MSX6536-10R Handbuch

Mellanox Technologies

Mellanox Technologies QM8700 Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies SwitchX-2 MSX6005F-1BFS Gebrauchsanweisung

Mellanox Technologies

Mellanox Technologies Mellanox SX1018 Betriebsanleitung

Mellanox Technologies

Mellanox Technologies MIS5022Q-1BRR Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies InfiniScale III Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies Spectrum SN2700 Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies IS5025D-1BRC Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies MetroDX MTX6000-2SFS Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies Grid Director 4036E Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies TX6000 Gebrauchsanweisung

Mellanox Technologies

Mellanox Technologies SwitchX-2 MSX1012B-1BFS Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies Spectrum SN2700 Gebrauchsanweisung

Mellanox Technologies

Mellanox Technologies switchx MSX1035B-1BRR Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies MIS5600Q-10DNC Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies SX6518-NR Handbuch

Mellanox Technologies

Mellanox Technologies Vantage 8500 Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies 1G Switch Air Duct Rail Kit Bedienungsanleitung

Mellanox Technologies

Mellanox Technologies SB7700 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung