Mellanox Technologies MIS5022Q-1BFR Bedienungsanleitung
Document no. 3408
Mellanox Technologies Confidential
http://www.mellanox.com
Dismantling Guide
OPNs MIS5022Q-1BFR, MIS5022Q-1BRR
Rev. 1.0
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
2 of 13
NOTE:
THIS INFORMATION IS PROVIDED BY MELLANOX FOR INFORMATIONAL PURPOSES ONLY
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS HARDWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Mellanox Technologies, Inc.
350 Oakmead Parkway Suite 100
Sunnyvale, CA 94085
U.S.A.
www.mellanox.com
Tel: (408) 970-3400
Fax: (408) 970-3403
Mellanox Technologies Ltd
PO Box 586 Hermon Building
Yokneam 20692
Israel
Tel: +972-4-909-7200
Fax: +972-4-959-3245
© Copyright 2011. Mellanox Technologies, Inc. All Rights Reserved.
Mellanox®, BridgeX®, ConnectX®, InfiniBlast®, InfiniBridge®, InfiniHost®, InfiniRISC®,
InfiniScale®, InfiniPCI®, PhyX® and Virtual Protocol Interconnect® are registered trademarks of
Mellanox Technologies, Ltd. CORE-Direct and FabricIT are trademarks of Mellanox Technologies, Ltd.
All other marks and names mentioned herein may be trademarks of their respective companies.
Contact Information
Should you have any questions regarding our Products, please feel free to contact us directly or contact our
local distributors.
Mellanox Technologies Call Center
Tel: +
Email: Mellanox_WEEE@mellanox.com
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
3 of 13
Table of Contents
Revision .......................................................................................................................................... 4
Preface............................................................................................................................................. 4
Switch OPNs................................................................................................................................... 4
Policy Statement ............................................................................................................................. 5
1Dismantling Instructions......................................................................................................... 6
1.1 InfiniBand Switch Systems - General............................................................................. 6
1.2 General Preparations....................................................................................................... 6
1.3 Cover............................................................................................................................... 7
1.4 Extracting the Power Supply Unit .................................................................................. 8
1.5 Extracting the Fan Unit................................................................................................. 10
1.6 Extracting the Board ..................................................................................................... 12
List of Tables
Table 1: Revision History ......................................................................................................... 4
Table 2: Switch OPNs for this Procedure................................................................................. 4
Table of Figures
Figure 1 Remove the Cover....................................................................................................... 7
Figure 2 PSU Location.............................................................................................................. 8
Figure 3 Harness Location for PSU .......................................................................................... 8
Figure 4 Remove the Power Supply Unit from the Switch....................................................... 9
Figure 5 Fan Location ............................................................................................................. 10
Figure 6 Fan Harness Locations.............................................................................................. 10
Figure 7 Remove Fan Module................................................................................................. 11
Figure 8 Board Screw Locations............................................................................................. 12
Figure 9 Remove Heat Sink .................................................................................................... 13
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
4 of 13
Revision
Table 1: Revision History
Revision
Date
1.0
January 2011
Preface
This manual is intended as a reference for dismantling MIS 5022 switch systems
in preparation of meeting the requirements of WEEE recycling. Intended
Audience
This manual is intended for technicians who dismantle the switch systems as a
reference for WEEE recyclers.
Mellanox Technologies emphasizes the importance of carefully following all
procedures described in this guide to prevent personal injury.
Switch OPNs
This document is valid for all of the switch OPNs listed in Table 2.
Table 2: Switch OPNs for this Procedure
MIS5022Q-1BFR
MIS5022Q-1BRR
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
5 of 13
Policy Statement
Mellanox Technologies recognizes the importance of developing connectivity
solutions that not only enable our customers to optimize their data centers
performance, but also protect the environment and ensure that future generations
enjoy its bounties. Mellanox Technologies is committed, therefore, to meeting the
requirements of the European Union’s WEEE (waste electrical and electronic
equipment) directive. The directive mandates how the materials used in electrical
and electronic equipment must be disposed of.
Mellanox Technologies has worked closely with its suppliers to eliminate
hazardous materials from its Products. There are instances, however, where it has
not proven possible to completely eliminate all hazardous materials.
Consequently, all applicable products are labeled with a crossed out “wheelie” bin
symbol, indicating that special care must be applied to their disposal and / or
recycling.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
6 of 13
1Dismantling Instructions
This guide provides detailed instructions for dismantling the Mellanox InfiniBand
switch systems. Follow the instructions in the order they are presented.
1.1 InfiniBand Switch Systems - General
The InfiniBand switch system complies with the RoHS directive under the
exemption known as RoHS-6.
The last digit of the product part number represents the RoHS type.
For example
MIS5022Q-1BRR—the last R = RoHS-6
InfiniBand switch system systems are comprised of:
Cover
Power Supply Unit (PSU)
Harnesses
Fan unit
Main Board
1.2 General Preparations
The InfiniBand switch system is assembled using Philips screws, and handles
with snap in latches for modules.
To disassemble the InfiniBand switch system you will need a small Philips
screwdriver.
The pictures displayed in the following pages provide visual guidance explaining
how to remove the modules from the mechanical base.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
7 of 13
1.3 Cover
1. Unscrew the rear-side screws, and slide the cover to the back for opening it.
2. Slide the top to the rear and lift off.
Figure 1 Remove the Cover
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
8 of 13
1.4 Extracting the Power Supply Unit
The power Supply unit is located on the side of the switch unit next to the main
board.
Figure 2 PSU Location
1. Disconnect the 3 harness connectors from the main board, the inlet and the ground.
Figure 3 Harness Location for PSU
2. Disassemble the 4 screws & washers attaching the power supply to the mechanical
base.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
9 of 13
Figure 4 Remove the Power Supply Unit from the Switch
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
10 of 13
1.5 Extracting the Fan Unit
The Fan unit is located in the rear of the system.
Figure 5 Fan Location
1. Disconnect the 3 harnesses from the fan unit to the board.
Figure 6 Fan Harness Locations
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Mellanox Technologies Schalten Handbücher
Mellanox Technologies
Mellanox Technologies Spectrum SN2740 Gebrauchsanweisung
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies Spectrum SN2700 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies IS5025D-1BRC Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies MSX6506-3R Handbuch
Mellanox Technologies
Mellanox Technologies SX6720 Gebrauchsanweisung
Mellanox Technologies
Mellanox Technologies MIS5022Q-1BRR Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies SX1012 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies InfiniScale MTS3600Q-1BNC Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies MSX6518-6R Handbuch
Mellanox Technologies
Mellanox Technologies MIS5600Q-10DNC Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies Grid Director 4036 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies SB7700 Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Betriebsanleitung
Mellanox Technologies
Mellanox Technologies SwitchX-2 MSX6005F-1BFS Gebrauchsanweisung
Mellanox Technologies
Mellanox Technologies MetroDX MTX6000-2SFS Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies 1G Switch Air Duct Rail Kit Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies InfiniScale III Bedienungsanleitung
Mellanox Technologies
Mellanox Technologies SX1710 Bedienungsanleitung
