Metrodata NT10G05 Bedienungsanleitung
NT10G05 USER MANUAL
76-02-105 Rev.B Page 1 of 80
NT10G05 User Manual
Version 9.33
DATE: 2
nd
January 2019
DOCUMENT NO: 76-02-105
REVISION: B
PREPARED BY: Paul Ingram
Metrodata Ltd
Laxton House, Crabtree Office Village
Eversley Way, Egham Surrey, TW20 8RY, UK
Tel +44 1 784 744700
NT10G05 USER MANUAL
76-02-105 Rev.B Page 2 of 80
METRODATA LTD
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without
the prior written permission of
Metrodata Ltd, Laxton House,
Crabtree Office Village, Eversley Way,
Egham, Surrey, TW20 8RY, United Kingdom.
DISCLAIMER
Metrodata Ltd makes no representations or warranties with respect to
the contents hereof and specifically disclaims any implied warranties
or merchantability or fitness for any particular purpose. Further,
Metrodata Ltd reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of
Metrodata Ltd to notify any person of such revision or changes.
Copyright © 2019 by Metrodata Ltd,
All Rights Reserved
NT10G05 USER MANUAL
76-02-105 Rev.B Page 3 of 80
Document History
24/5/2018 XA Document Created
7/6/2018 A First Release, 9.33 Firmware
2/1/2019 B 9.33 Firmware, spell checked
NT10G05 USER MANUAL
76-02-105 Rev.B Page 4 of 80
1
INTRODUCTION............................................................................................... 10
1.1
NetTester NT10G05................................................................................... 11
1.2
Safety......................................................................................................... 11
1.3
Electro Magnetic Compatibility................................................................... 11
1.3.1
EN55022 Statement ........................................................................... 12
1.3.2
FCC Declaration ................................................................................. 12
1.4
WEEE Directive ......................................................................................... 12
1.5
RoHS Compliance ..................................................................................... 12
2
INSTALLATION................................................................................................. 13
2.1
NT10G05 Rear Panel ................................................................................ 13
2.1.1
Mains Power ....................................................................................... 13
2.1.2
DC Power ........................................................................................... 13
3
Quick Start ........................................................................................................ 14
3.1
Loopback Unit Configuration...................................................................... 16
3.2
Tester Unit Configuration ........................................................................... 17
4
Configuration..................................................................................................... 21
4.1
Settings Menu ............................................................................................ 22
4.1.1
WAN Port Configuration...................................................................... 22
4.1.1.1
Operational State ........................................................................... 23
4.1.1.2
Speed............................................................................................. 23
4.1.1.3
Duplex............................................................................................ 23
4.1.1.4
Auto Negotiation............................................................................. 23
4.1.1.5
Negotiated...................................................................................... 23
4.1.1.6
SFP Details .................................................................................... 24
4.1.2
User Port............................................................................................. 25
4.1.3
SLA..................................................................................................... 27
4.1.3.1
Name ............................................................................................. 27
NT10G05 USER MANUAL
76-02-105 Rev.B Page 5 of 80
4.1.3.2
Bandwidth ...................................................................................... 27
4.1.3.2.1
CIR, Committed Information Rate............................................. 28
4.1.3.2.2
CBS, Committed Burst Size...................................................... 28
4.1.3.2.3
EIR, Excess Information Rate................................................... 28
4.1.3.2.4
EBS, Excess Burst Size............................................................ 28
4.1.3.2.5
Bandwidth................................................................................. 29
4.1.3.2.6
Include S-Tags/C-Tags............................................................. 29
4.1.3.3
FLR, Frame Loss Ratio .................................................................. 30
4.1.3.4
FTD, Frame Transfer Delay ........................................................... 30
4.1.3.5
IFDV, Inter Frame Delay Variation ................................................. 30
4.1.3.6
Availability ...................................................................................... 30
4.1.3.7
SES Threshold............................................................................... 30
4.1.3.8
Delay Percentile............................................................................. 30
4.1.3.9
External Tags................................................................................. 30
4.1.3.10
MTU .............................................................................................. 31
4.1.3.11
Multiple SLA’s................................................................................ 31
4.1.4
L3 Test Interface................................................................................. 32
4.1.4.1
L2 Discovery VLAN ........................................................................ 32
4.1.4.2
L3 Interface .................................................................................... 32
4.1.4.3
DHCP............................................................................................. 33
4.1.4.4
IP Address ..................................................................................... 33
4.1.4.5
Net Mask........................................................................................ 33
4.1.4.6
Default Gateway............................................................................. 33
4.1.4.7
C-VLAN.......................................................................................... 33
4.1.5
Unit Info .............................................................................................. 34
4.1.5.1
Node Name.................................................................................... 34
4.1.5.2
Software Version............................................................................ 34
NT10G05 USER MANUAL
76-02-105 Rev.B Page 6 of 80
4.1.5.3
Serial Number ................................................................................ 34
4.1.5.4
MAC Address................................................................................. 35
4.1.5.5
Time / Date .................................................................................... 35
4.1.5.5.1
Time.......................................................................................... 35
4.1.5.5.2
Date .......................................................................................... 35
4.1.5.5.3
Advanced.................................................................................. 36
4.1.6
Management Interface........................................................................ 37
4.1.6.1
Admin Status.................................................................................. 37
4.1.6.2
DHCP............................................................................................. 37
4.1.6.3
IP Address ..................................................................................... 37
4.1.6.4
Net Mask........................................................................................ 38
4.1.6.5
Remote Management..................................................................... 38
4.1.6.6
C-VLAN.......................................................................................... 38
4.1.6.7
Routing Table................................................................................. 39
4.1.7
SNMP ................................................................................................. 40
4.1.7.1
IP Address ..................................................................................... 41
4.1.7.2
Access Rights ................................................................................ 42
4.1.7.3
Receives Traps .............................................................................. 42
4.1.7.4
SNMP Version ............................................................................... 42
4.1.8
Store Settings ..................................................................................... 42
4.2
Testing Menu ............................................................................................. 43
4.2.1
Ping..................................................................................................... 43
4.2.2
Tester Mode = Loopback .................................................................... 45
4.2.2.1
Tester Mode................................................................................... 45
4.2.2.2
Layer .............................................................................................. 45
4.2.2.2.1
Layer = L2................................................................................. 45
4.2.2.2.2
Layer = L3................................................................................. 46
NT10G05 USER MANUAL
76-02-105 Rev.B Page 7 of 80
4.2.2.2.3
Layer = L4................................................................................. 47
4.2.3
Tester Mode = Tester ......................................................................... 48
4.2.3.1
Test Regime = BASIC.................................................................... 48
4.2.3.1.1
Basic Test Parameters ............................................................. 49
4.2.3.1.1.1
Test Peer............................................................................ 49
4.2.3.1.1.1.1
Layer ...............................................................................................49
4.2.3.1.1.1.2
Direction ..........................................................................................50
4.2.3.1.1.1.3
C-VLAN ( L2 Only ) .........................................................................50
4.2.3.1.1.1.4
Discover Peers................................................................................50
4.2.3.1.1.1.5
Peer Name (L2 Only) ......................................................................51
4.2.3.1.1.1.6
MAC Address (L2 only)...................................................................51
4.2.3.1.1.1.6.1 NetTESTER remote loopback device on a P2P/E-Line connection. 1
4.2.3.1.1.1.6.2 NetTESTER remote loopback device on a P2MP/E-Lan connect’n 2
4.2.3.1.1.1.6.3 Non NetTESTER remote loopback device ...................................... 2
4.2.3.1.1.1.7
MAC Modifier ..................................................................................52
4.2.3.1.1.1.8
SLA .................................................................................................53
4.2.3.1.1.1.9
Multiple Peers .................................................................................54
4.2.3.1.1.1.10
IP Address (L3 Only).......................................................................54
4.2.3.1.1.1.11
UDP Port (L3 Only ) ........................................................................54
4.2.3.1.1.1.12
SLA ( L3 Mode )..............................................................................54
4.2.3.1.1.2
L2 Packet Size (L2/L3) ....................................................... 54
4.2.3.1.1.3
Training Period (L2/L3)....................................................... 55
4.2.3.1.1.4
Training Frames per Second ( L2/L3 )................................ 55
4.2.3.1.1.5
Rate ( L2/L3 ) ..................................................................... 55
4.2.3.1.1.6
Test Duration ( L2/L3 ) ....................................................... 56
4.2.3.1.2
Start / Stop Test........................................................................ 56
4.2.3.1.3
Test Progress ........................................................................... 56
4.2.3.1.4
View Report .............................................................................. 60
4.2.3.1.5
Download Report ...................................................................... 60
NT10G05 USER MANUAL
76-02-105 Rev.B Page 8 of 80
4.2.3.2
Test Regime = RFC2544 ............................................................... 61
4.2.3.2.1
RFC-2544 Test Parameters...................................................... 61
4.2.3.2.1.1
Test Peers.......................................................................... 62
4.2.3.2.1.2
Frame Size......................................................................... 62
4.2.3.2.1.3
User Defined Size .............................................................. 62
4.2.3.2.1.4
Frame Format .................................................................... 63
4.2.3.2.1.5
Training Period................................................................... 63
4.2.3.2.1.6
Training Frames per Second ( L2/L3 )................................ 63
4.2.3.2.1.7
Throughput Test (L2/L3)..................................................... 63
4.2.3.2.1.7.1
Perform Test ...................................................................................64
4.2.3.2.1.7.2
Short/Long Test Time .....................................................................64
4.2.3.2.1.7.3
Upper Limit......................................................................................64
4.2.3.2.1.8
Latency Test ( L2/L3 ) ........................................................ 64
4.2.3.2.1.8.1
Rate.................................................................................................65
4.2.3.2.1.8.2
Time ................................................................................................65
4.2.3.2.1.9
Back to Back Test .............................................................. 66
4.2.3.2.1.9.1
Perform Test ...................................................................................66
4.2.3.2.1.9.2
Upper Limit......................................................................................66
4.2.3.2.2
Start / Stop Test........................................................................ 66
4.2.3.2.3
View Report .............................................................................. 67
4.2.3.2.4
Download Report ...................................................................... 68
4.2.3.3
Test Regime = Y.1564 ................................................................... 69
4.2.3.3.1.1
Test Peer............................................................................ 69
4.2.3.3.1.2
Frame Size......................................................................... 70
4.2.3.3.1.3
User Defined Size .............................................................. 70
4.2.3.3.1.4
Training Period................................................................... 70
4.2.3.3.1.5
Training Frames per Second.............................................. 71
4.2.3.3.1.6
Background Rate ............................................................... 71
NT10G05 USER MANUAL
76-02-105 Rev.B Page 9 of 80
4.2.3.3.1.7
Colour Aware ..................................................................... 71
4.2.3.3.1.8
Stop on Fail ........................................................................ 71
4.2.3.3.1.9
Configuration Test Setup.................................................... 72
4.2.3.3.1.9.1
Test Time ........................................................................................72
4.2.3.3.1.9.2
CIR Test ..........................................................................................72
4.2.3.3.1.9.3
EIR Test ..........................................................................................73
4.2.3.3.1.9.4
Policing Test ...................................................................................73
4.2.3.3.1.9.5
CBS test ..........................................................................................73
4.2.3.3.1.9.6
EBS test ..........................................................................................74
4.2.3.3.1.10
Performance Test Setup .................................................. 75
4.2.3.3.1.10.1
Performance Test ...........................................................................75
4.2.3.3.1.10.2
Test Time ........................................................................................75
4.2.3.3.1.10.3
Green Rate .....................................................................................75
4.2.3.3.1.10.4
Green Burst.....................................................................................75
4.2.3.3.2
Start / Stop Test........................................................................ 76
4.2.3.3.3
View Report .............................................................................. 76
4.2.3.3.4
Download Report ...................................................................... 77
4.3
Maintenance Menu .................................................................................... 78
4.3.1
Restart Unit......................................................................................... 78
4.3.2
Restore Defaults ................................................................................. 78
4.3.3
Save Settings File............................................................................... 78
4.3.3.1
TFTP Functions.............................................................................. 79
NT10G05 USER MANUAL
76-02-105 Rev.B Page 10 of 80
1 INTRODUCTION
The Metrodata NetTESTER NT10G05 is low cost, but highly featured and capable
network test and performance monitor. The NT10G05 offers the capability to test the
performance of a network up to full 10G wire speed. The 10G network port is
presented as an SFP+ module. In addition to out of service testing, the performance
of the network may be monitored for several key SLA performance metrics.
The NT10G05 offers full wire speed test capabilities supporting RFC-2544, Y.1564
and a manually configured Basic Test Mode. The NT10G05 allows for the
configuration of the expected service SLA parameters and then performs tests to
verify the performance against the SLA. A birth certificate report is produced as
evidence of the test including the key metrics of frame loss, latency and jitter.
The NT10G05 can operate as a tester at layer 2, where the destination MAC
address and VLAN is required, or alternatively at Layer 3/4 where IP/UDP test
packets are sent to a peer IP address.
In addition to the test generation capabilities the NT10G05 can also act as a simple
loopback reflector device operating at layer 2, performing a MAC SA/DA swap
function; at layer 3, additionally performing an IP address swap for packets received
with the configured protocol or finally at layer 4 where the UDP port numbers are
also swapped for a configured UDP service.
In addition to the out of service test capabilities, the NT10G05 can provide a
performance monitoring capability using TWAMP, Two Way Active Measurement
Protocol. TWAMP is a server/reflector type function and the NT10G05 can act as
either, or both, Server supporting up to 64 monitoring sessions, or reflector where all
received TWAMP packets are time stamped and reflected towards the generator.
For timestamp accuracy, hardware timestamping is performed giving a sub
microsecond accuracy.
The performance monitoring function will monitor the service between server and
reflector against a configured SLA measuring synthetic packet loss, latency and
Jitter with the statistics being stored for up to 30 days.
Inhaltsverzeichnis
Andere Metrodata Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
