Meyer Drive Pro Bedienungsanleitung
Form No. 1-1227R1
February 2022
Assembly Instructions
Standard Operating System with Hands Free Plowing
E73 12V Hydraulic Unit
Includes
Black Iron: 41090
Moldboard: 79499K
© 2020 Printed in the U.S.A.
18513 Euclid Ave. • Cleveland, Ohio 44112-1084
Phone 216-486-1313 www.meyerproducts.com
Table of Contents
General Information.........................................................................................................................................................................................................................1
Black Iron Parts Lists.....................................................................................................................................................................................................................2-3
Moldboard Parts List ........................................................................................................................................................................................................................4
Standard Operating System Wiring............................................................................................................................................................................................5
Plow Assembly & Adjustments.................................................................................................................................................................................................6-7
E73 Hydraulics ....................................................................................................................................................................................................................................8
Mounting Plow...................................................................................................................................................................................................................................9
Dismounting Plow ......................................................................................................................................................................................................................... 10
Pre-Delivery Inspection................................................................................................................................................................................................................ 11
Registration ...................................................................................................................................................................................................................................... 11
(1)
GENERAL INFORMATION
Always disconnect battery prior to installation.
SAFETY PRECAUTIONS should be used when Quik Lift® is in a RAISED position.
LOWER plow to the ground when vehicle is PARKED.
OVERHAUL and SERVICE information is covered on separate instructions.
Lift arm should be removed from vehicle if / when snowplow is removed.
Note:
1. Connect ground cable to negative side of battery for a solid connection to ground.
2. Route all cables away from moving engine parts, Manifolds, and sharp sheet metal.
3. For weather protection, coat all connections with Meyer Dielectric Grease Part No. 15632
4. The vehicle must be equipped with a “Heavy Duty Battery” (70 Amp, Hr. Min.), 550 C.C.A. and“Alternator” (60 Amp. Min.)............ to
obtain maximum performance.
5. Follow these instructions explicitly. Warranty does not apply to a Meyer product which has been negligently or improperly
assembled or installed.
TORQUE CHART FOOT
Please visit our website to nd our most updated technical information; including installation instructions, user manuals, parts
diagrams, EZ Troubleshooter, and more.
Please see your owner’s manual for Pre-Season, Post-Season, and General Maintenance.
www.meyerproducts.com
Pliers
1/2" socket
1/2" box wrench
9/16" box wrench
9/16" socket
3/4" box wrench
15/16" box wrench
15/16" deep well socket
Bolt Nut Size Gr. 2 Gr. 5 Gr. 8
1/4-20 4-5
5/16-18 9-11
3/8-16 17-20 26-29
7/16-14 42-46 60-66
1/2-13 64-72 99-100
5/8-11 127-141 179-198
Tool List for Plow Assembly
NOTICE:NOTICE: Meyer Products LLC reserves thje right, under its continuing product imporvement program, to change construction, design, details,
specications, and prices without notice or without incurring any obligation. Meyer Products LLC assumes no responsibility for installations not
made in accordance with these instructions.
Black Iron Parts List
41090
Specic Components
(2)
1
2
5
6
7
8
9
10
2
11
12
13
16
17
18
19
20
12
14
15
14
17
18
20
21
22
23
24
25
26a
27
28
29
30
21
21
21
22
22
22
22
23 24
26
27
30
35
35
35
35
36
36
36
36
37
38 38
38
39
40
40
40
41
42
43
50
52
53
52
Parts indented are included in the carton, bag or assembly under which they are indented.
(3)
Black Iron Parts List
*NotethattheTruckSideWiringHarness(55)haschangedfroma7pinto4pinasofOctober
2017. Please use the applicable part number as needed.
**NotethattheTrailerAdapterHarness23057isusedformostvehiclesandisincludedwiththe
black iron kit.
See Service Bulletin SB 259 for more information.
Item Part # QTY Description
41090 1 DP5.0- 7.5 E-73 DP Mount Assy.
N/A 1 DP6.8-7.5 E-73 DP Mount Assy.
1 05888 1 • Lift Ram 1-1/2 x 8”
07772 1 • LH Ram with Hose & Fittings
2 05887 1 •• Ram (1-1/2” x 10”)
3 22866 1 •• SAE 6 x 90 Degree Elbow
4 22885 1 •• Hose Assy 1/4 x 54” M-6
07783 1 • RH Ram with Hose & Fittings
2 05887 1 •• Ram (1-1/2” x 10”)
3 22866 1 •• SAE 6 x 90 Degree Elbow
4 22921 1 •• Hose Assy 1/4 x 38” M-6
5 10514 1 • Lift Arm
6 14250 1 • Pivot Bar Drive Pro 6.8
7 14185 1 • E-73 DP Mounting Bracket
8 14232 1 • A-Frame Drive Pro
9 14289 1 • E-73 Lift Unit Cover Front
9a 14288 1 • E-73 Lift Unit Cover Rear
10 14290 2 • Lift Unit Cover Bracket
11 16027 1 • E-73 Lift Ass’y. (Unit only)
12 19836 1 • Clevis Drive Pro
18944 1 • Lift Frame Assy DP
13 18919 1 •• Lift Frame
14 19775 2 •• Pin
15 18938 1 •• Pull Pin
16 20406 1 •• Cotter Pin 3/16 x 1-1/2”
17 22010 2 •• Bolt H 3/8-16 x 1-1/4”
18 22260 2 •• Poly Washer 3/8”
19 814000005 1 •• Spring
20 20144 2 • Bolt H 5/8 - 11 x 2-3/4”Gr. 5
21 20147 4 • Bolt H 5/8 - 11 x 3-1/2”Gr. 5
22 20309 5 • Locknut 5/8 - 11
23 20331 2 • Lockwasher 5/8
24 20357 3 • Flatwasher 5/8”
25 20355 2 • Flatwasher 1/2”
26 20385 3 • Cotter Pin 1/8 x 1-1/4”
26a 22845 1 • Hair Pin
27 20420 2 • Cotter Pin 1/4 x 2”
28 22000 1 • Bolt H 5/8-11 x 4-1/2”Gr. 8
29 22022 1 • Crankstand
30 22436 2 • Pin 1 x 3”
31 23039 1 • Plow Side Harness
32 22719 3 • Pivot Pin 5/8 x 3”
33 22866 1 • SAE Mx3/8 90 Degree Elbow
34 22884 1 • Hose 1/4 x 33”
35 20027 4 • Bolt H 5/16-18 x 1”Gr. 2
36 20049 4 • Bolt H 3/8-16 x 1 Gr. 2
37 20100 2 • Bolt H 1/2-13 x 2-3/4”Gr. 5
38 20305 4 • Locknut 3/8-16
Item Part # QTY Description
39 20307 2 • Locknut 1/2-13
40 20530 4 • 5/8-11 Finish Nut
41 22379 4 • Lockwasher 3/8
42 20800 1 • Quick Link 5/16”
43 21543 1 • Chain 5/16” x 29”
41092 1 • Accessory Box
44 23025 1 •• Power Cable - 36”
45 12978 2 •• Trip Spring
07810 1 •• Nite Saber III Kit
09917 1 •• Plow Marker Kit
46 8214 2 ••• Plow Marker
47 20027 4 ••• Bolt H 5/16-18 x 1 Gr. 2
48 20304 4 ••• Locknut 5/16-18
49 20352 8 ••• Flatwasher 5/16”
50 15372 1 •• Starter Solenoid - 12 volt
51 21832 1 •• Split Bushing
52 N/A N/A N/A
53 N/A N/A N/A
54 23047 1 •• Controller
55 23059 1 •• Truck Side Harness (4 Pin)*
23058 1 •• Truck Side Harness (7 Pin)*
41102 1 •• Hardware Bag
56 09124 2 ••• Eye Bolt
57 20357 2 ••• Flatwasher 5/8”
58 20385 2 ••• Cotter Pin 1/8 x 1-1/4”
59 22720 2 ••• Pivot Pin 5/8 x 7
60 15187 1 • Breather
** 23057 1 • Trailer Adapter Harness**
(4)
Moldboard Parts List
62
63-65
6
56
57
58
59
46-49
46-49
56
45
45
Item DP 6’ 8” QTY Description
79499K 1 Moldboard Kit
79499 1 • Drive ProTM Moldboard Assembly
62 09796 1 • • Cutting Edge
63 22067 8 • • Bolt 1/2-13 x 3-1/4” Gr. 5
64 N/A 6 • • Bolt 1/2-13 x 3-1/4” Gr. 5
65 20307 8 • • Locknut 1/2-13
08092 2 • • Shoes
08107J 1 • Deector
(5)
Wiring Harnesses & Controller
Vehicle Side HarnessVehicle Side Harness
1) Route the 12 pin connector into vehicle’s cab and plug into controller.
2) Route the 16 pin connector to the front of the vehicle and plug into the plow side harness.
3) Route the 4 pin connector to rear of vehicle and plug into vehicle’s trailer harness using the trailer adapter harness (50).
Use cable ties to ensure the harness is secured to the vehicle’s frame.
4) The BLUE wire will connect to the vehicle’s keyed accessory circuit. This is to ensure the plow turns on and o with the ve-
hicle’s ignition.
The following step is for 2015 & later GM vehicles with an alternator relay...The following step is for 2015 & later GM vehicles with an alternator relay...
5) The WHITE wire will connect to 2015 & Later GM vehicles with alternator relay. See Meyer Products Service Bulletin SB252.
The following two steps are optional and may be enforced by local law which requires your vehicle lights to be o while your plowThe following two steps are optional and may be enforced by local law which requires your vehicle lights to be o while your plow
lights are on and vice versa...lights are on and vice versa...
6) Connect the RED to the HIGH beam function.
7) Connect the WHITE to the LOW beam function.
Power HarnessPower Harness
1) Route through the vehicle’s grille.
2) Connect the terminals to the vehicle’s battery. Red to Positive and Black to Negative.
Trailer Adapter Harness
(6)
Plow Assembly & Adjustments
Nite Saber LED LightsNite Saber LED Lights
See seperate Nite Saber LED instructions for further information.
Mount the lights as shown below.
Connect both male ends from the snow plow light to the female ends on
the Plow Side Harness. Ensure all wiring harnesses are secured against the
lift frame.
Check snow plow lights and blinkers to ensure proper operation. If operat-
ing in reverse (i.e. driver side blinking instead of passenger side), reverse the
harness connections.
Note: All electrical connections should have both ends coated with a dielec-
tric grease (Meyer Part # 15632) prior to nal installation. This will ensure a
good connection and help in preventing corrosion.
Nite Saber LED Parts List
Item Part QTY Description
1 23067 1 Nite Saber LED Kit
- 23066 1 • Passenger Side LED
- 23065 1 • Driver Side LED
2 08126 1 • Hardware Bag
3 ----- 8 • • Hex Bolt 3/8” x 3/4”, SS
4 ----- 8 • • Hex Nut 3/8”, SS
5 ----- 8 • • Lock Washer 3/8”, SS
6 ----- 2 • • Metal Bracket, Bottom
7 ----- 2 • • Bolt 1/2”- 13 x 1 1/12”, SS
8 ----- 2 • • Hex Lock Nut 1/2”- 13, SS
9 ----- 4 • • Flat Washer 1/2”, SS
10 ----- 2 •• Neoprene Grommet 1/2”
Parts indented are included in the carton, bag, or assembly
under which they are indented.
Plow MarkersPlow Markers
Attach Plow Markers (21) to moldboard using 5/16-18 x 1”Bolt (22), 5/16”
Flatwasher (24) and 5/16-18 Locknut (23).
Trip Spring AdjustmentTrip Spring Adjustment
Attach Eye Bolts to Moldboard and Trip Springs to Pivot Bar, making
certain locknuts are positioned as shown below.
Make certain each Eye Bolt is in a vertical position as shown below so that
the Eye Bolt and Trip Spring hinge properly when the Moldboard trips.
Note: Proper tension is attained when the Trip Spring coils just begin to
seperate and then tightening top locknut four additional turns. Tighten
bottom locknut to secure Eye Boilt in positiion.
Install Eye Bolt Caps over exposed threads.
Clevis HeightClevis Height
Clevis height for the 19836 (41090) and 19943 (41190) clevis should be
9.5” to the ground.
(7)
Plow Assembly & Adjustments
Lift ChainsLift Chains
Attach the Lift Chain to the Lift Arm through the two hooks on the lift
arm. Adjust the lift chain at the lift arm so that there are 2-3 links of slack.
This ensures that the plow blade will lift fully and be able to follow the
ground contour while plowing.
Drop Speed AdjustmentDrop Speed Adjustment
Drop Speed Adjustment: Loosen jam nut and turn knob clockwise to slow
the drop of the plow and counter clockwise to speed the drop of the plow.
Tighten jam nut.
Drop Speed Adjustment
Hydraulic Fluid LevelHydraulic Fluid Level
Top o the unit to the ll line on the reservoir with Meyer M-1 Hydraulic
Fluid.
NOTE: Proper uid level is to the ll line on the reservoir. It must be checked
with the lift cylinder fully retracted.
(8)
E73 Hydraulics
A.A. Pull vehicle into plow
assembly and push plow
assembly forward an
inch or two.
F.F. Attach crankstand to
lift frame.
E.E. Remove crankstand
from a-frame.
D.D. Adjust crankstand
until it is no longer in
contact with the ground.
C.C. Push back on lift
frame until both pins
spring through mount on
vehicle.
B.B. Twist handles on both
sides to engage spring
loaded pins.
G.G. Remove weather
cover on both ends and
connect both electrical
plugs.
(9)
Mounting Plow
NOTE:NOTE: Pictures may vary based on model
Andere Handbücher für Drive Pro
1
Inhaltsverzeichnis
Andere Meyer Zubehör für Schneefräsen Handbücher
Meyer
Meyer Drive Pro EZ Build 41130 Bedienungsanleitung
Meyer
Meyer E-Z PLUS MDII STP-7.0 Bedienungsanleitung
Meyer
Meyer Lot Pro 41275 Bedienungsanleitung
Meyer
Meyer Lot Pro Light Duty Bedienungsanleitung
Meyer
Meyer MDII C-7.5 Bedienungsanleitung
Meyer
Meyer Lot Pro LP-7.5 Bedienungsanleitung
Meyer
Meyer ELECTRO LIFT E-57 Bedienungsanleitung
Meyer
Meyer TRIMLINE Series Bedienungsanleitung
Meyer
Meyer EZ-Mount Plus Bedienungsanleitung
Meyer
Meyer Lot Pro E73 Bedienungsanleitung
