MGE UPS Systems Pulsar EXtreme CLA 2000 VA Bedienungsanleitung

ИБП MGE Pulsar EXtreme - Pulsar EXtreme CLA 2000 - 3000 ВА - Руководство

Постоянная ссылка на страницу: https://eaton-power.ru/catalog/mge-pulsar-extreme/

51033775EN/AA - Page 1

www.mgeups.com MGE UPS SYSTEMS

Pulsar

EXtreme CLA

2000/3000 VA

Installation manual

Page 2 - 51033775EN/AA

51033775EN/AA - Page 3

... and checking the contents

1. Unpacking

Pulsar EXtreme CLA 2000/3000 VA

Tower model

Rack model

Pulsar EXtreme CLA module.

connection cable.

documentation.

telescopic rails and 19" rack mounting hardware.

Page 4 - 51033775EN/AA

Mounting the rails in the rack.

The rails and the screws required to mount them are included in the box.

2.1 Mounting (Rack model)

2. Installation

51033775EN/AA - Page 5

2.2 Checking equipment compatibility

Check that the UPS and CLA modules are compatible:

UPS no.

Pulsar EXtreme CLA 2000 51033021

Pulsar EXtreme CLA 3000 51033031

CLA no.

51033029

51033539

2.3 Batteries to be used

Use only 12 V / 65 Ah lead-acid batteries.

Connect them as indicated below to obtain the required backup time:

2 hours

Pulsar EXtreme CLA 2000 1 string of 7

12V / 65Ah batteries

4 hours 8 hours

2. Installation

2 parallel-connected strings of 7

12V / 65Ah batteries

3 parallel-connected strings of 7

12V / 65Ah batteries

Backup time

This operation may be carried out only by qualified electricians using the necessary safety equipment for work on live parts

(insulated tools, gloves, goggles).

The connection of each module to the electrical supply must be protected by an easily accessible circuit

breaker (not supplied). A module can be isolated from the electrical supply by opening this circuit

breaker.

Before making any connections or working on the equipment, make sure the battery circuit breaker is in OFF

position and that the main contacts of the upstream protective devices of the electrical installation are open (OFF

position).

For maximum battery life, CLA and UPS modules must be installed in the same room as batteries so that the automatic

regulation of the charge voltage as a function of temperature can work correctly.

Pulsar EXtreme CLA 2000 Rack 51033521 51033529

Pulsar EXtreme CLA 3000 Rack 51033531 51033539

Pulsar EXtreme CLA 3000 1 string of 10

12V / 65Ah batteries

2 parallel-connected strings of 10

12V / 65Ah batteries

3 parallel-connected strings of 10

12V / 65Ah batteries

2.4

Connecting the batteries to the

Pulsar EXtreme

CLA module

Page 6 - 51033775EN/AA

2. Installation

L +

BATTERIE/BATTERY

L -

25A

12V-65Ah

Use a 3-conductor cable (shielded, max.

length 6 m, 3 x 4 mm2conductors) to be

passed through the shielded cable gland.

Use a 25 A circuit breaker

(curve B) for protection.

Note: the cable and circuit breaker are not

supplied with the product.

1. Prepare the cable.

2. Unscrew the plate and dismantle the

metal cable gland on the Pulsar EXtreme

CLA module.

3. Mount the cable gland on the shielded

cable.

4. Connect the 3 conductors to the terminal

block and refit the plate.

5. Connect the other end of the cable to the

circuit breaker.

2.5 Connecting the Pulsar EXtreme CLA module to the power source

L +

RESEAU/MAINS/NETZ

Use a flexible cable (3 x 2.5 mm2

conductors) to be passed through the plastic

cable gland.

Always connect the earth wire

first. Use a 10 A circuit breaker

(curve C) for protection.

Note: the cable and circuit breaker are not

supplied with the product.

1. Prepare the cable.

2. Unscrew the plate with the plastic cable

gland.

3. Connect the 3 conductors and remount

the plate.

51033775EN/AA - Page 7

2. Installation

2.6 Connecting the UPS to the Pulsar EXtreme CLA module

Use the connection cable supplied with the

module.

2.7 Setting the UPS

Before connecting the loads to be protected

and starting the system, the UPS must be

reconfigured using the UPS Driver software

supplied on a diskette with the UPS.

1. Switch the battery circuit breaker to ON

position.

2. Connect a PC to the UPS using an RS232

cable.

3. Run the UPS Driver software installed on

a diskette. Go to the "battery" menu and

select the battery backup time (2, 4 or 8

hours) corresponding to the new

configuration.

Once the backup time has been set, click to

save the settings and exit UPS Driver. This

procedure is necessary for fast recharge of

the batteries by the Pulsar EXtreme CLA.

The installation is now ready and you can

connect the equipment to be protected.

50A

12V-65Ah

25A

Page 8 - 51033775EN/AA

Weight in kg

Dimensions and weights

3. Technical specifications

Pulsar EXtreme CLA

Tower model

Rack model

0.75 x Pn 0.5 x Pn

Dimensions in mm (H x W x D)

443 x 173 x 465

177(4U) x 483 x 462

Rated

power (Pn)

2-hr CLA

4-hr CLA

8-hr CLA

2 hrs 10 min

5 hrs

8 hrs

3 hrs

6 hrs 30 min

12 hrs

4 hrs 50 min

12 hrs

18 hrs

Recharge time

(to 90% full backup time)

2-hr CLA

6 hrs

4-hr CLA 8-hr CLA

12 hrs 21 hrs

Operating voltage and frequency of the Pulsar EXtreme CLA

Battery backup times

Voltage: 160 to 260 V.

Frequency: Same as that of the UPS.

Recharge time and current

The total recharge current is 9.5 A whatever the configuration.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MGE UPS Systems UPS Handbücher

MGE UPS Systems

MGE UPS Systems EXL 1000 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Evolution 2000 RT 2U Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems EPS 6000 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems PULSAR 1000 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Comet EXtreme Series Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 800 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Esprit 3 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems PULSAR EVOLUTION 2200 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems 12 kVA Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar Extreme 3200C Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems 11+ Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Comet EX RT 5 kVA Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar ES 5+ Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems EX 5 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems EX 11RT Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar TM 30 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar EX7 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems EPS 7000 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 1200 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Comet EX RT Series Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar MX ModularEasy Installationshandbuch

MGE UPS Systems

MGE UPS Systems EX 11RT Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 1500 Bedienungsanleitung

MGE UPS Systems

MGE UPS Systems PULSAR EVOLUTION 3000 XL Gebrauchsanweisung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung