Miboxer PA5 Bedienungsanleitung
1. Product photo
PA5 is a newly updated high performance 5-channel signal amplifier. Adopt high
speed optical
coupler with 10Mbps output rate; it can output the signal of main
controller completely and synchronously. This products work on all PWM series
LED controllers in market; Made from the big current MOSFET to assure the high
rate output. Everytime you add one more amplifier, you can connect twice as
many as LEDs. Theoreitically, it can connect countless amplifier, input and
output is with optoelectronic isolation. Working with main controller can satisfy
the application requiring large power, wide range and synchronization area.
2. Introduction
Model No.: PA5
Working Temperature: -20~60℃
Input / Output Voltage: DC12V/24V
Output Current: 6A/Channel
Total Output Max: 15A
3. Specifications
Switching Rate: 10Mbps
Connection: Common anode
Size:115*48*27mm
Weight: 83g
27mm
115mm 48mm
V+V+V_
CH1CH2
OUTPUT POWER
CH3CH4CH5
CH3 CH4 CH5CH2CH1
INPUT
Option
12V+
24V+
5-Channel High Performance Amplifier
Model No.: PA5
Input Voltage: DC12V/24V
Output Voltage: DC12V/24V
Output Current: 6A/Channel
Total Output: Max 15A
Switching Rate: 10Mbps
Working Temp.: -20 -60℃
Connection: common anode
www.futlight.com
Made in China
Subordinate New Brand
5-Channel High Performance Amplifier
Model No.: PA5
0284
Subordinate New Brand
V+V+V_
CH1CH2
OUTPUT POWER
CH3CH4CH5
CH3 CH4 CH5CH2CH1
INPUT
Option
12V+
24V+
5-Channel High Performance Amplifier
Model No.: PA5
Input Voltage: DC12V/24V
Output Voltage: DC12V/24V
Output Current: 6A/Channel
Total Output: Max 15A
Switching Rate: 10Mbps
Working Temp.: -20 -60℃
Connection: common anode
www.futlight.com
Made in China
Subordinate New Brand
1. Please check whether the input voltage of the constant voltage power supply
is in accordance with the controller, and please check the connection of both
the cathode and anode, otherwise the controller will be broken.
2. Please don’t connect wires with power on. Please turn on again only when it
is in right connection and no short circuit.
5. Attention
To User:
4. Application Diagram
Attention: LED strip must be DC12V or 24V.
1. Welcome use Futlight products.Before using our products, pls read the
instructions carefully. If you have started to operate the products, we think
you have read the instructions.
2. Futlight Optoelectronics Co., Ltd have the final explanation and modification
right of all products; if there is modification, we will not inform customers.
Dotted Line Note:Please choose and
connect to the correct V+(12V/24V) terminal
according to the voltage of LED strip.
Power input: DC12V/24V
V- V+
V+
www.futlight.com
Made in China
Inhaltsverzeichnis
Andere Miboxer Verstärker Handbücher
