Microchip Technology HV2903 Bedienungsanleitung

Looking for a discount?

Check out our current promotions!

This coversheet was created by Verical, a division of Arrow Electronics, Inc. (“Verical”). The attached document was created by the part supplier,

not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, afﬁliates, employees, and agents make no representations or warranties

regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,

product names, service names, and trademarks are the property of their respective owners.

00000005981LF-000

EOS Power

Buy Now

We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in

stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.

1-855-837-4225

Give us a call

International: 1-555-555-5555 1-415-281-3866

1-415-281-3866

Arrow Electronics,

Verical Division

P.O. Box 740970

Los Angeles, CA 90074-0970

Arrow Electronics, Inc

9201 East Dry Creek Road

Centennial, CO 80112

ADM00795

MICROCHIP TECHNOLOGY

Buy Now

2017 Microchip Technology Inc. DS50002582A

HV2903

Analog Switch

Evaluation Board

User’s Guide

DS50002582A-page 2 2017 Microchip Technology Inc.

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC,

KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,

PIC32 logo, rfPIC and UNI/O are registered trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,

MXDEV, MXLAB, SEEVAL and The Embedded Control

Solutions Company are registered trademarks of Microchip

Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, chipKIT,

chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,

dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,

FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,

Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,

MPLINK, mTouch, Omniscient Code Generation, PICC,

PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,

rfLAB, Select Mode, Total Endurance, TSHARC,

UniWinDriver, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

ISBN: 978-1-5224-2444-4

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

and India. The Company’s quality system processes and procedures

are for its PIC®MCUs and dsPIC®DSCs, KEELOQ®code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

HV2903

ANALOG SWITCH

EVALUATION BOARD

2017 Microchip Technology Inc. DS50002582A-page 3

Table of Contents

Preface ........................................................................................................................... 6

Introduction............................................................................................................ 6

Document Layout .................................................................................................. 6

Conventions Used in this Guide ............................................................................ 7

Warranty Registration............................................................................................ 7

Recommended Reading........................................................................................ 8

The Microchip Web Site ........................................................................................ 8

Customer Support ................................................................................................. 8

Document Revision History ................................................................................... 8

Chapter 1. Product Overview

1.1 Introduction ..................................................................................................... 9

1.2 HV2903 IC - Description ................................................................................. 9

1.3 HV2903 Analog Switch Evaluation Board - Features ..................................... 9

1.4 HV2903 Analog Switch Evaluation Board - Functional Description ............... 9

1.5 HV2903 Analog Switch Evaluation Board Technical Kit ............................... 11

1.6 What the HV2903 Analog Switch Evaluation Board Kit Includes ................. 12

Chapter 2. Installation and Operation

2.1 Getting Started ............................................................................................. 13

2.2 HV MUX GUI Installation............................................................................... 13

2.3 Setup Procedure .......................................................................................... 16

2.4 Interface Connections .................................................................................. 18

2.5 Testing the HV2903 Analog Switch Evaluation Board ................................. 19

2.6 HV MUX Controller Board and GUI Manual ................................................. 19

2.7 Generation of Pulser Output at SW8A of HV2903 ....................................... 22

Chapter 3. PCB Design and Layout Notes

3.1 PCB Layout Techniques for HV2903 ........................................................... 25

Appendix A. Schematic & Layouts

A.1 Introduction .................................................................................................. 26

A.2 ADM00795 - Schematic ............................................................................... 27

A.3 ADM00795 - Top Silk ................................................................................... 28

A.4 ADM00795 - Top Copper and Silk ............................................................... 28

A.5 ADM00795 - Top Copper ............................................................................. 29

A.6 ADM00795 - Inner 1 ..................................................................................... 29

A.7 ADM00795 - Inner 2 ..................................................................................... 30

A.8 ADM00795 - Inner 3 ..................................................................................... 30

A.9 ADM00795 - Bottom Copper ........................................................................ 31

2017 Microchip Technology Inc. DS50002582A-page 4

A.10 ADM00795 - Bottom Copper and Silk ........................................................ 31

A.11 ADM00795 - Bottom Silk ............................................................................ 32

A.12 ADM00825 - Schematic (Connection) ....................................................... 33

A.13 ADM00825 - Schematic (Power Supply) ................................................... 34

A.14 ADM00825 - Schematic (USB to SPI) ....................................................... 35

A.15 ADM00825 - Schematic (Programmable Clock) ........................................ 36

A.16 ADM00825 - Schematic (FPGA) ................................................................ 37

A.17 ADM00825 - Schematic (FPGA Decoupling Capacitors) ........................... 38

A.18 ADM00825 - Schematic (Connectors) ....................................................... 39

A.19 ADM00825 - Top Silk ................................................................................. 40

A.20 ADM00825 - Top Copper and Silk ............................................................. 40

A.21 ADM00825 - Top Copper ........................................................................... 41

A.22 ADM00825 - Inner 1 ................................................................................... 41

A.23 ADM00825 - Inner 2 ................................................................................... 42

A.24 ADM00825 - Inner 3 ................................................................................... 42

A.25 ADM00825 - Inner 4 ................................................................................... 43

A.26 ADM00825 - Bottom Copper ...................................................................... 43

A.27 ADM00825 - Bottom Copper and Silk ........................................................ 44

A.28 ADM00825 - Bottom Silk ............................................................................ 44

Appendix B. Bill of Materials

B.1 HV2903 Analog Switch Evaluation Board .................................................... 45

B.2 HV MUX Controller Board.............................................................................. 46

Appendix C. Demo Board Waveforms

C.1 Board Typical Waveforms ............................................................................ 51

Worldwide Sales and Service .................................................................................... 52

HV2903

ANALOG SWITCH

EVALUATION BOARD

USER’S GUIDE

2017 Microchip Technology Inc. DS50002582A-page 5

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

HV2903 Analog Switch Evaluation Board. Items discussed in this chapter include:

•Document Layout

•Conventions Used in this Guide

•Recommended Reading

•The Microchip Web Site

•Customer Support

•Document Revision History

DOCUMENT LAYOUT

This document describes how to use the HV2903 Analog Switch Evaluation Board as

a development tool to evaluate the HV2903 No High-Voltage Bias, Low Harmonic

Distortion, 32-Channel, High-Voltage Analog Switch IC. The user’s guide layout is as

follows:

•Chapter 1. “Product Overview” – Important information about the HV2903 Ana-

log Switch Evaluation Board.

•Chapter 2. “Installation and Operation” – This chapter includes a detailed

description of each function of the demonstration board and instructions for how to

begin using the HV2903 Analog Switch Evaluation Board.

•Chapter 3. “PCB Design and Layout Notes” – This chapter explains important

points of the PCB design and layout of HV2903 Analog Switch Evaluation Board.

•Appendix A. “Schematic & Layouts” – Shows the schematic and PCB layout

diagrams for the HV2903 Analog Switch Evaluation Board and the HV MUX

Controller Board.

•Appendix B. “Bill of Materials” – Lists the parts used to build the HV2903 Ana-

log Switch Evaluation Board and the HV MUX Controller Board.

•Appendix C. “Demo Board Waveforms” – Describes the various demo wave-

forms for the HV2903 Analog Switch Evaluation Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the www.microchip.com on

line help. Select the Help menu, and then Topics to open a list of available online help files.

Preface

2017 Microchip Technology Inc. DS50002582A-page 6

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB®IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog

“Save project before build”

Underlined, italic text with

right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive

arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user

void main (void)

{ ...

}

HV2903 Analog Switch Evaluation Board User’s Guide

DS50002582A-page 7 2017 Microchip Technology Inc.

RECOMMENDED READING

This user’s guide describes how to use the HV2903 Analog Switch Evaluation Board.

Another useful document is listed below. The following Microchip document is available

and recommended as a supplemental reference resource.

• HV2903 Data Sheet – “HV2803/HV2903/HV2904 - No High-Voltage Bias, Low

Harmonic Distortion, 32-Channel, High-Voltage Analog Switch.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

The web site contains the following information:

•Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com.

DOCUMENT REVISION HISTORY

Revision A (December 2017)

• Initial Release of this Document.

HV2903

ANALOG SWITCH

EVALUATION BOARD

USER’S GUIDE

2017 Microchip Technology Inc. DS50002582A-page 8

Chapter 1. Product Overview

1.1 INTRODUCTION

HV2903 Analog Switch Evaluation Board (ADM00795) works with HV MUX Controller

Board (ADM00825) to provide 32-Channel HV Analog Switches without HV Supplies,

demonstration including basic switch ON/OFF operation, and 2:1 MUX operation with

two built-in MD1822 and TC6320 pulser circuit.

1.2 HV2903 IC - DESCRIPTION

The HV2903 is 32-Channel HV Analog Switches without HV Supplies. It is designed for

use in applications requiring high-voltage switching controlled by low-voltage control

signals, such as medical ultrasound imaging, driving piezoelectric transducers and in

printers. The typical 10Ωon resistance analog switch can pass the analog pulse signal

up to ±3A of current at ±100V without high-voltage supplies such as ±100V. It requires

only ±6V or ±5V for switch ON/OFF operation and 3.3V for logic operation.

The HV2903 has two modes of operation: individual switching mode and bank switch-

ing mode. The user can select the mode by MODE pin logic input. The 32 analog

switches can be controlled individually through digital interface when MODE input is

high (Individual switching mode). The digital interface clock operates up to 66 MHz. All

16 even switches and all 16 odd switches can be controlled together through simple 2

logic inputs when MODE input is low (bank switching mode).

The HV2903 has standby mode to decrease power consumption at idle state. When

STBY logic input is low, it operates in standby mode and consumes very low current.

When STBY logic input is high, it operates normally.

1.3 HV2903 ANALOG SWITCH EVALUATION BOARD - FEATURES

• One HV2903 32-Channel HV Analog Switches without HV Supplies

• Designed to work with Microchip HV MUX Controller Board

• Two 2:1MUX with built-in MD1822 + TC6320 pulsers

• 5 MHz 3 level voltage pulse waveform outputs

• On-board 330 pF//2.5 kΩdummy load per SW8A, SW9A, SW24A, SW25A

• Mode selection and Switch ON/OFF control through PC GUI and controller board

• Pulser ON/OFF and time domain control through PC GUI and controller board

1.4 HV2903 ANALOG SWITCH EVALUATION BOARD - FUNCTIONAL

DESCRIPTION

The HV2903 Analog Switch Evaluation Board can control the HV2903 operation and

built-in pulsers that are connected to two 2:1 MUX switches for demonstration. Four

switch output of two 2:1 MUX have SMA connectors, and the user can connect four

transducer elements. The other side of the 2:1 MUX is connected to two built-in

MD1822 + TC6320 pulsers. The HV2903 Analog Switch Evaluation Board can drive

four transducer elements with 5 MHz ±100V pulse signals.

HV2903 Analog Switch Evaluation Board User’s Guide

DS50002582A-page 9 2017 Microchip Technology Inc.

The evaluation board features one HV2903/AHA 12x12x1.2 mm 132-lead TFBGA

packaged integrated circuit, two MD1822K6-G 3x3x1 mm 16-lead QFN packaged inte-

grated circuits and four TC6320K6-G 4x4x1 mm 8-lead DFN packaged NMOS and

PMOS pair integrated circuits.

The board uses two high-speed 20 signal pair carrying capable right-angle backplane

connector, which is designed to work with Microchip HV MUX Controller Board

(ADM00825) as a control signal source.

The HV MUX Controller Board has an FPGA that generates pulser waveform and

logic control signals and a USB-bridge IC that connects the control board to a PC. By

means of a Microsoft Windows®driver and GUI, the user can control the HV2903 and

two built-in pulsers.

Four switch terminals consisting two MUX configuration on the PCB have SMA

connectors to which user can connect loads. Jumpers close to SMA connectors are

for connecting the on-board dummy R-C load (330 pF//2.5 KΩ) optionally to the pulser

output.

WARNING

Risk warning of electrical shock. This board uses multiple hazardous high

voltages. Disconnect all high voltage supplies before working on it. Electrical

safety precautions must be taken when working on or using this board.

Andere Handbücher für HV2903

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Microchip Technology Hauptplatine Handbücher

Microchip Technology

Microchip Technology RN4870 Bedienungsanleitung

Microchip Technology

Microchip Technology MCP39F501 Bedienungsanleitung

Microchip Technology

Microchip Technology DIGITAL POWER Bedienungsanleitung

Microchip Technology

Microchip Technology DM160223 Bedienungsanleitung

Microchip Technology

Microchip Technology SOT23-6 Bedienungsanleitung

Microchip Technology

Microchip Technology MCP23X17 Bedienungsanleitung

Microchip Technology

Microchip Technology TA100 Bedienungsanleitung

Microchip Technology

Microchip Technology UCS1003-2 Bedienungsanleitung

Microchip Technology

Microchip Technology CL88030 Bedienungsanleitung

Microchip Technology

Microchip Technology BM62 Bedienungsanleitung

Microchip Technology

Microchip Technology EVB-USB3503 QFN Bedienungsanleitung

Microchip Technology

Microchip Technology BM83 EVB Bedienungsanleitung

Microchip Technology

Microchip Technology MCP39F521 Bedienungsanleitung

Microchip Technology

Microchip Technology dsPIC33 series Bedienungsanleitung

Microchip Technology

Microchip Technology ATBTLC1000 Xplained Pro Installationsanleitung

Microchip Technology

Microchip Technology PIC18F57Q84 Curiosity Nano Installationshandbuch

Microchip Technology

Microchip Technology MCP16502 Bedienungsanleitung

Microchip Technology

Microchip Technology EVB-SEC1210 Bedienungsanleitung

Microchip Technology

Microchip Technology UCS2112 Bedienungsanleitung

Microchip Technology

Microchip Technology SAMA5D27 SOM1 Kit1 Bedienungsanleitung

Microchip Technology

Microchip Technology ATSAMA5D27-WLSOM1-EK1 Bedienungsanleitung

Microchip Technology

Microchip Technology SAM B11ZR Xplained Pro Bedienungsanleitung

Microchip Technology

Microchip Technology PICDEM 2 Plus Bedienungsanleitung

Microchip Technology

Microchip Technology ATSAMA5D2-ICP Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung