Microlife BP W10 Bedienungsanleitung

IB BP W10 EN Master 2022

Revision Date: 2022-04-26

Wrist Blood Pressure Monitor

EN 1

W10

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

Microlife UAB

P. Lukšio g. 32,

08222 Vilnius

Lithuania

Microlife BP W10

AP AK

A-

B-

C-

BP W10Guarantee Card

Name of Purchaser

Serial Number

Date of Purchase

Specialist Dealer

1Microlife BP W10 EN

Display

Microlife BP W10 EN

1ON/OFF button

2Display

3M-button (memory)

4Time button

AT Traffic light display

6Battery compartment

7Cuff

8Cuff signal indicator «ERR 1»

9Irregular heartbeat (IHB) symbol

AT Traffic light indicator

AK Date/Time

AL Systolic value

AM Diastolic value

AN Pulse rate

AO Pulse indicator

AP Stored value

AQ Battery display

AR Cuff fit check

-A: Suboptimal cuff fit

-B: Arm movement indicator «ERR 2»

-C: Cuff pressure check «ERR 3»

Read the important information in this

instructions for use before using this

device. Follow the instructions for use for

your safety and keep it for future refer-

ence.

Type BF applied part

Manufacturer

Intended use, user and environment:

This device is an oscillometric blood pressure monitor intended for

radial (wrist) blood pressure non invasively. It's suitable for use by

adults (age 12 and above) for self measurement and measurement

of others, in a domestic environment (e.g. home-use).

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical

device for taking measurements on the wrist. This device was devel-

oped in collaboration with physicians and clinical tests prove its

measurement accuracy to be very high.*

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Catalogue number

Serial number

(YYYY-MM-DD-SSSSS; year-month-day-

serial number)

Caution

Humidity limitation

Temperature limitation

Medical device

Protected against solid foreign objects of

12.5 mm Ø and greater. Protected against

vertically falling water drops when enclo-

sure tilted up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W10 EN

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol.

Table of contents

1. Important facts about blood pressure

2. Using the device for the first time

Inserting the batteries

Setting the date and time

3. Checklist for taking a reliable measurement

4. Taking a blood pressure measurement

How not to store a reading

How do I evaluate my blood pressure

5. Appearance of the irregular heartbeat (IHB) symbol

6. Data memory

Viewing the stored values

Clearing all values

7. Battery indicator and battery change

Low battery

Flat battery - replacement

Which batteries and which procedure?

Using rechargeable batteries

8. Error messages

9. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

10. Guarantee

11. Technical specifications

1. Important facts about blood pressure

Blood pressure is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the systolic

(upper) value and the diastolic (lower) value, are always

measured.

The device indicates the pulse rate (the number of times the heart

beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating /

in the evening: before going to bed, bathing or taking medication)

and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Leave a small break of 5 minutes between two measurements.

If you suffer from an irregular heartbeat (arrhythmia, see

«Section 5.»), measurements taken with this device should be

evaluated with your doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may

differ from the measurement taken on the upper arm. We

therefore advise you to compare these values with those

produced by the upper arm measurement and discuss them

with your doctor.

5Microlife BP W10 EN

2. Using the device for the first time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment 6 is on the bottom of the device. Insert the

batteries (2 x 1.5 V, size AAA), thereby observing the indicated

polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the time button 4.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button for approx. 3 seconds in the setting mode. Press time

button again and then the year number starts to flash. Now you

can enter the new values as described above.

3. Checklist for taking a reliable measurement



Avoid activity, eating or smoking immediately before the measure-

ment.



Sit down on a back-supported chair and relax for 5 minutes. Keep

the feet flat on the floor and do not cross your legs.



Always measure on the same wrist (normally left). It is recom-

mended that doctors perform double arm measurements on a

patients first visit in order to determine which wrist to measure in

the future. The wrist with the higher blood pressure should be

measured.



Remove any items of clothing and your watch, for example, so

that your wrist is free.



Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.



Warp the cuff on your wrist about 0.5 - 1 cm above your hand.

Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 21.5 cm (5.25 - 8.5 inches).

4. Taking a blood pressure measurement

1. Press the ON/OFF button 1 to start the measurement.

2. The cuff will now pump up automatically. Support your arm in a

relaxed position with the device at the same height as your heart.

Relax, do not move and do not tense your arm muscles until the

measurement result is displayed. Breathe normally and do not

talk.

Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

3. The cuff fit check AR on the display indicates that the cuff is

perfectly placed. If the icon AR-A appears, the cuff is fitted subop-

timally, but it is still ok to measure.

4. When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the device will automatically pump some more air into the cuff.

5. During the measurement, the pulse indicator AO flashes in the

display.

6. The result, comprising the systolic AL and the diastolic AM blood

pressure and the pulse rate AN are displayed. Note also the expla-

nations on further display symbols in this booklet.

7. When the device has finished measuring, remove the cuff.

8. Switch off the device. (The monitor does switch off automatically

after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1 until «M» AP is flashing. Confirm to delete the reading by

pressing the time button 4.

«CL» is displayed when the reading is deleted from the

memory successfully.

How do I evaluate my blood pressure

The triangle on the left-hand edge of the display AT points at the

range within which the measured blood pressure value lies. The

value is either within the optimum (white), elevated (hatched gray) or

high (black) range. The classification corresponds to the following

ranges defined by international guidelines (ESH, AHA, JSH). Data in

mmHg.

Table for classifying blood pressure values in adults in accordance

with the World Health Organisation (WHO) in 2003. Data in mmHg.

Range Systolic Diastolic Recommendation

1 blood pressure

too high

≥135 ≥85 Seek medical

advice

7Microlife BP W10 EN

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

5. Appearance of the irregular heartbeat (IHB) symbol

This symbol 9 indicates that an irregular heartbeat was detected. In

this case, the measured blood pressure may deviate from your actual

blood pressure values. It is recommended to repeat the measure-

ment.

6. Data memory

This device automatically stores the last 30 measurement values.

Viewing the stored values

Press the M-button 3 briefly, when the device is switched off. The

display first shows «M» AP, and «A»which stands for the average of

all stored values.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Blood pressure readings with suboptimal cuff fit AR-A are not

considered in the average value.

Pay attention that the maximum memory capacity of 30

memories is not exceeded. When the 30 memory is full, the

oldest value is automatically overwritten with the 31

value. Values should be evaluated by a doctor before the

memory capacity is reached – otherwise data will be lost.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

2 blood pressure

elevated

130 - 135 80 - 85 Self-check

3 blood pressure

optimum

<130 <80 Self-check

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

Range Systolic Diastolic Recommendation

Cancel deletion: press ON/OFF button 1 while «CL» is

flashing.

7. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AQ

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 6 at the back of the device.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in Section

«2. Using the device for the first time».

The measurements stored in the memory are deleted when

the batteries are removed from the battery compartment (e.g.

when replacing batteries).

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

Inhaltsverzeichnis

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP B3 AFIB Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A100 Plus Bedienungsanleitung

Microlife

Microlife AFIB ADVANCED Easy Bedienungsanleitung

Microlife

Microlife BP A3 PLUS Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife BPB6 Connect Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP 3BU1-4 Bedienungsanleitung

Microlife

Microlife BP A3L PC Bedienungsanleitung

Microlife

Microlife BPB2 Basic Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP A100 Bedienungsanleitung

Microlife

Microlife BP RM 100 Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BPB3 AFIB Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung