Microlife BP W3 Comfort Bedienungsanleitung

IB BP W3 Comfort E-V11 3523

Revision Date: 2023-07-13

W3 Comfort

Wrist Blood Pressure Monitor

Microlife Corporation

9F, 431, RuiGuang Road, NeiHu

Taipei 11492, Taiwan, China

www.microlife.com

Microlife UAB

P. Lukšio g. 32

08222 Vilnius

Lithuania

111

124

PL 137

Microlife BP W3 Comfort

AO-A

AO-B

AO-C

BP W3 ComfortGuarantee Card

Name of Purchaser / Ф.И.О. покупателя / Име на купувача /

Numele cumpărătorului / Imię i nazwisko nabywcy /

Jméno kupujícího / Meno zákazníka / Ime in priimek kupca /

Ime i prezime kupca / Vásárló neve / Ime i prezime kupca

Serial Number / Серийный номер / Сериен номер /

Număr de serie / Numer seryjny / Výrobní číslo / Výrobné číslo /

Serijska števika / Serijski broj / Sorozatszám / Serijski broj

Date of Purchase / Дата покупки / Дата на закупуване /

Data cumpărării / Data zakupu / Datum nákupu / Dátum kúpy /

Datum nakupa / Datum kupovine / Vásárlás dátuma /

Datum kupovine

Specialist Dealer / Специализированный дилер / Специалист

дистрибутор / Distribuitor de specialitate / Przedstawiciel /

Specializovaný dealer / Špecializovaný predajca / Spezializirani

trgovec / Ovlašćeni diler / Forgalmazó / Ovlašteni prodavač

1Microlife BP W3 Comfort EN

Display

Microlife BP W3 Comfort EN

1ON/OFF button

2Display

3M-button (memory)

4Time button

5Battery compartment

6Cuff

7Systolic value

8Diastolic value

9Pulse rate

AT Date/Time

AK Stored value

AL Traffic light indicator

AM Irregular heartbeat (IHB) symbol

AN Cuff signal indicator «ERR 1»

AO Cuff fit check

-A: Suboptimal cuff fit

-B: Arm movement indicator «ERR 2»

-C: Cuff pressure check «ERR 3»

AP Pulse indicator

AQ Battery display

Read the important information in these

instructions for use before using this device.

Follow the instructions for use for your safety

and keep it for future reference.

Type BF applied part

Keep dry

Manufacturer

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Model number

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

This device was developed in collaboration with physicians and clin-

ical tests carried out prove its measurement accuracy to be of a very

high standard.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our prod-

ucts.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol and ISO81060-

2:2013.

Catalogue number

Serial number

(YYYY-MM-DD-SSSSS;

year-month-day-serial number)

Caution

Temperature limitation

Humidity limitation

Medical device

Protected against solid foreign objects of 12.5

mm Ø and greater. Protected against verti-

cally falling water drops when enclosure tilted

up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W3 Comfort EN

Table of contents

1. Important facts about blood pressure and self-measure-

ment

2. Using the device for the first time

Inserting the batteries

Setting the date and time

3. Checklist for taking a reliable measurement

4. Taking a blood pressure measurement

How not to store a reading

How do I evaluate my blood pressure

5. Appearance of the irregular heartbeat (IHB) symbol

6. Data memory

Viewing the stored values

Clearing all values

7. Battery indicator and battery change

Low battery

Flat battery - replacement

Which batteries and which procedure?

Using rechargeable batteries

8. Error Messages

9. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

10. Guarantee

11. Technical Specifications

1. Important facts about blood pressure and self-

measurement

Blood pressure is the pressure of the blood flowing in the

arteries generated by the pumping of the heart. Two values, the

systolic (upper) value and the diastolic (lower) value, are

always measured.

The device indicates the pulse rate (the number of times the

heart beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell them if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating

/ in the evening: before going to bed, bathing or taking medica-

tion) and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results. Therefore we recom-

mend using the MAM technology.

Deviations between measurements taken by your doctor or in

the pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Therefore we recommend using the MAM technology.

Leave a small break of at least 15 seconds between two

measurements.

If you suffer from an irregular heartbeat, measurements taken

with this device should be evaluated with your doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

2. Using the device for the first time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment 5 is on the bottom of the device. Insert the

batteries (2 x 1.5 V, size AAA), thereby observing the indicated

polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the time button 4.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button for approx. 3 seconds until the year number starts to flash.

Now you can enter the new values as described above.

This monitor is specially tested for use in pregnancy and pre-

eclampsia. When you detect unusual high readings in preg-

nancy, you should measure after a short while again (eg.

1 hour). If the reading is still too high, consult your doctor or

gynecologist.

5Microlife BP W3 Comfort EN

3. Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

your feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in

the pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 23 cm (5.25 - 9.05 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

4. Taking a blood pressure measurement

1. Press the ON/OFF button 1 to start the measurement.

2. The cuff fit check AO on the display indicates that the cuff is

perfectly placed. If the icon AO-A appears, the cuff is fitted subop-

timally, but it is still ok to measure.

3. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

4. The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

5. During the measurement, the pulse indicator AP flashes in the

display.

6. The result, comprising the systolic 7 and the diastolic 8 blood

pressure and the pulse rate 9 are displayed. Note also the

explanations on further display symbols in this booklet.

7. Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1 until «M» AK is flashing. Confirm to delete the reading by

pressing the time button 4.

You can stop the measurement at any time by pressing the

ON/OFF button or open the cuff (e.g. if you feel uneasy or an

unpleasant pressure sensation).

«CL» is displayed when the reading is deleted from the

memory successfully.

How do I evaluate my blood pressure

The triangle on the left-hand edge of the display

points at the range

within which the measured blood pressure value lies. The value is

either within the optimum (white), elevated (hatched gray) or high

(black) range. The classification corresponds to the following ranges

defined by international guidelines (ESH, ESC, JSH). Data in mmHg.

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

5. Appearance of the irregular heartbeat (IHB) symbol

This symbol AM indicates that an irregular heartbeat was detected.

In this case, the measured blood pressure may deviate from your

actual blood pressure values. It is recommended to repeat the

measurement.

6. Data memory

This device automatically stores the last 30 measurement values.

Viewing the stored values

Press the M-button 3 briefly, when the device is switched off. The

display first shows «M» AK, and «A»which stands for the average of

all stored values.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been

switched off beforehand) until «CL» appears and then release the

Range Systolic Diastolic Recommendation

1 blood pressure

too high ≥135 ≥85 Seek medical advice

2 blood pressure

elevated 130 - 135 80 - 85 Self-check

3 blood pressure

optimum <130 <80 Self-check

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

Blood pressure readings with suboptimal cuff fit AO-A are not

considered in the average value.

7Microlife BP W3 Comfort EN

button. To permanently clear the memory, press the M-button while

«CL» is flashing. Individual values cannot be cleared.

7. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

AQ will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably,

you should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 5 by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in Section

«2. Using the device for the first time».

Which batteries and which procedure?

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Cancel deletion: press ON/OFF button 1 while «CL ALL»

is flashing.

The memory retains all values although date and time must

be reset – the year number therefore flashes automatically

after the batteries are replaced.

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

8. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «ERR 3», is displayed.

* Please immediately consult your doctor, if this or any other problem

occurs repeatedly.

9. Safety, care, accuracy test and disposal

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

Error Description Potential cause and remedy

«ERR 1»

Signal too

weak The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

«ERR 2»

AO-B Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

«ERR 3»

AO-C No pressure

in the cuff An adequate pressure cannot be gener-

ated in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

«ERR 5» Abnormal

result The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for taking a reliable

measurement and then repeat the

measurement.*

«HI» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

«LO» Pulse too

low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

If you think the results are unusual, please read through the

information in «Section 1.» carefully.

Safety and protection

Error Description Potential cause and remedy

Andere Handbücher für BP W3 Comfort

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP 3AS1-2 null

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP AG1-10 Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP W2 Slim Bedienungsanleitung

Microlife

Microlife BP AG1-30 Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife 3BT0-AP Bedienungsanleitung

Microlife

Microlife BP W90 Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife aponorm Basis Bedienungsanleitung

Microlife

Microlife BPB1 Classic Bedienungsanleitung

Microlife

Microlife BP3GK1-4B Bedienungsanleitung

Microlife

Microlife BP A3 PC Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP3GX1-5A Bedienungsanleitung

Microlife

Microlife BP3MY1-1P Bedienungsanleitung

Microlife

Microlife BP A2 Standard Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP RM 100 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung