Microlife #BP3AA1-2 Bedienungsanleitung

Blood Pressure

Monitor

with Microlife Averaging Mode

Instruction Booklet for model #BP3AA1-2

US Patent #’s6,485,429 (Irregular Heartbeat Detector)

6,447,457 (Microlife Averaging Mode)

Table of contents

1. Introduction

1.1 Features of your blood pressure monitor

1.2 Important information about self measurement

2. Important information on the subject of blood pressure and its measurement

2.1. How does high/low blood pressure arise?

2.2. Which values are normal?

2.3. What can be done, if regular high/low values are obtained?

2.4. Microlife Averaging Mode Technology

3. Components of your blood pressure monitor

4. Operation of your blood pressure monitor

4.1. Inserting the batteries

4.2. Using an AC power adapter

4.3. Cuff connection

4.4. Setting the time and date

4.5. Reading the set date

5. The measurement procedure

5.1. Before measuring

5.2. Common sources of error

5.3. Fitting the cuff

5.4. Measurement mode selection (single or average mode)

5.5. Setting memoryfor user 1 or user 2

5.6. Measuring procedure

5.7. Discontinuing a measurement

5.8. Memory – recall of the measurements

5.9. Clearing the memory

6. Error messages/Troubleshooting

7. Care and maintenance

8. Warranty

9. Certifications

10. Technical specifications

11. How to contact us

1. INTRODUCTION

1.1. Features of your Blood Pressure Monitor

Your Microlife blood pressure monitor is a fully automatic digital blood pressure measuring

device for use on the upper arm. It enables very fast and reliable measurement of the systolic

and diastolic blood pressure as well as the pulse by way of the oscillometric method. This device

offers clinically proven accuracy and has been designed to be very user friendly.

Before using, please read this instruction manual carefully. Then store the manual in a safe place

for later reference. Please contact your physician for further questions on the subject of blood

pressure and its measurement.

ATTENTION!

1.2. Important information about self-measurement

Self-measurement means control, not diagnosis or treatment. Your values must always be dis-

cussed with your physician. You should never alter the dosages of any medication without direc-

tion from your physician.

The pulse display is not suitable for checking the frequency of heart pacemakers!!

In cases of irregular heartbeat, measurements made with this instrument should

only be evaluated after consultation with your doctor.

Electromagnetic Interference: This device contains sensitive electronic components. Avoid

strong electrical or electromagnetic fields in the direct vicinity of the device (e.g. mobile tele-

phones, microwave ovens, etc.). These can lead to temporaryimpairment of the monitor’s meas-

uring accuracy.

2. IMPORTANT INFORMATION ON THE SUBJECT OF BLOOD PRESSURE AND ITS MEASUREMENT

2.1 How does high or low blood pressure arise?

The level of blood pressure is determined in the circulatory center of your brain and adjusts to a

variety of situations through feedback from the nervous system. To adjust blood pressure, the

strength and frequency of the heart (Pulse), as well as the width of circulatory blood vessels are

altered. Blood vessel width is altered by fine muscles in the blood vessel walls. The level of arte-

rial blood pressure changes periodically during heart activity. During the “blood ejection”

(Systole), the value is highest (systolic blood pressure value). At the end of the heart’s “rest peri-

od” (Diastole) pressure is lowest (diastolic blood pressure value). Blood pressure values must lie

within certain normal ranges in order to prevent particular diseases.

2.2 Which values are normal?

Blood pressure is too high if your diastolic pressure is above 90 mmHg and/or your systolic blood

pressure is over 160 mmHg, while at rest.In this case, please consult your physician immediate-

ly. Long-term values at this level endanger your health due to continual damage to the blood ves-

sels in you body.

If your systolic blood pressure values are between 140 mmHg and 160mmHg and/or the diastolic

blood pressure values between 90 mmHg and 95mmHg, consult your physician. Regular self-

checks are necessary.

If you have blood pressure values that are too low, (i.e., systolic values under 105mmHg and/or

diastolic values under 60 mmHg), consult your physician.

Even with normal blood pressure values, a regular self-check with your blood pressure monitor is

recommended. You can detect possible changes in your values early and react appropriately.

If you areundergoing medical treatment to control your blood pressure, keep a record of values

along with time of day and date. Show these values to your physician. Never use the results of

your measurements to independently alter the drug doses prescribed by your physician.

Which values arenormal?

The following standards for assessing high blood pressure(without regard to age) have been

established by the National Institutes of Health JNC7.

Category Systolic Diastolic

(mmHg) (mmHg)

Normal <120 <80

Self-Check

Pre-Hypertension 120 - 139 80 - 89

Stage 1 140 - 159 90 - 99

Hypertension

Stage 2 >160 >100

Hypertension

•Further Information

• If your values are mostly normal under resting conditions but exceptionally high under condi-

tions of physical or psychological stress, it is possible that your are suffering from so-called

“labile hypertension.” Consult your physician.

• Correctly measured diastolic blood pressure values above 120mmHg require immediate med-

ical treatment.

2.3 What can be done if regular high or low values are obtained?

a) Consult your physician.

b) Increased blood pressure values (various forms of hypertension) are associated with consid-

erable health risks over time. Arterial blood vessels in your body are endangered due to con-

strictions caused by deposits in the vessel walls (Arteriosclerosis). A deficient supply of blood

to important organs (heart, brain, muscles) can result. Furthermore, the heart will become

structurally damaged with increased blood pressure values.

c) There are many different causes of high blood pressure. We differentiate between the com-

mon primary (essential) hypertension, and secondary hypertension. The latter group can be

ascribed to specific organ malfunctions. Please consult your physician for information about

the possible origins of your own increased blood pressure values.

d) There are measures you can take to reduce and even prevent high blood pressure. These

measures must be permanent lifestyle changes.

1. Eating habits:

•Strive for a normal weight corresponding to your age. See your doctor for your ideal weight.

•Avoid excessive consumption of common salt.

•Avoid fatty foods.

2. Previous illnesses

•Consistently follow all medical instructions for treating illness such as: diabetes

(diabetes mellitus or sugar diabetes), fat metabolism disorder, and gout.

3. Habits

•Give up smoking completely

•Drink only moderate amounts of alcohol

•Restrict your caffeine consumption (coffee, tea and chocolate)

e) Your physical condition

•After a medical examination, and with your doctor’s approval and direction; exercise.

•Choose sports which require stamina and avoid those which require strength.

•Avoid reaching the limit of your performance.

•With previous illnesses and/or an age of over 40 years, please consult your physician before

beginning your exercise routine. You must receive advise regarding the type and extent of

exercise that is appropriate for you.

2.4 Microlife Averaging Mode Technology

Microlife Averaging Mode (MAM) Technology is a new concept for optimum reliability in self’measure-

ment of blood pressure. A single measurement is rarely your real result. An average of three readings

is medically proven to provide the most accurate result. With the push of a single button, the Microlife

Averaging Mode blood pressure monitor takes three consecutive measurements, and calculates the

average.

4. OPERATION OF YOUR BLOOD PRESSURE MONITOR

4.1 Inserting the batteries

After you have unpacked your device, insertthe batteries. The

battery compartment is located on the back side of the device

(see illustration).

a) Remove cover from the bottom plate, as illustrated.

b) Insert the batteries (4 x size AA ). Always use AA long life batter-

ies or alkaline 1.5v batteries. Do not use rechargeable batteries.

c) If a battery warning appears in the display, the batteries are dis-

charged and must be replaced.

Attention!

•After the batterywarning appears, the device is blocked until the batteries have been replaced.

•If the blood pressure monitor is left unused for long periods, please remove the batteries from the device.

Functional check: Hold the ON/OFF button down to test all the display elements. When function-

ing correctly all segments must appear.

4.2. Using an AC adapter (optional accessory sold separately)

It is possible to operate this blood pressureinstrument with an AC adapter (output 6 V DC / 600 mA with

DIN plug).

a) Insertthe AC adapter plug into the socket at the left side of the instrument.

b) Plug the AC adapter into a power socket. Test that power is available by pressing the ON/OFF button.

Note: No power is taken from the batteries while the AC adapter is connected to the instrument. If

power is interrupted during the measurement, (e.g. by accidental removal of the AC adapter from the

socket) the instrument must be reset by removing the plug from its socket and

re-inserting the connectors. To purchase an AC adapter, please call Microlife at

1-800-568-4147 or visit our website, www.microlifeusa.com.

3. COMPONENTS OF YOUR BLOOD PRESSURE MONITOR

The upper arm cuff includ-

ed with your monitor is for

arm circumferences of 9.5”

-13.25”(20-32cm).

Please Note: Do not force

the cuff connection into

the opening. Make sure

the cuff connection is not

pushed into the AC

adapter port. Larger cuffs

are available.

4.3. Cuffconnection

Insertthe cufftube into the opening provided on the left side of the

instrument, as shown in the diagram.

AC Adapter and Cuff Connection

(AC Adapter sold separtely)

User 1 or 2

and Set Time/Date

Start

Memory

and Scroll

ON/OFF

Systolic

Time/Date

Diastolic

Pulse

Select 1 Measurement

or Select 3 Measurement for

Microlife Averaging Mode

5. Press the User/Time button again. The

last two characters (day) are now blinking.

6. The current day can now be entered by

pressing the MEMORY button. (Example: 14

xpresses advances the day from the 1st to

15th)

7. Press the User/Time button again. The

display now switches to the current time,

during which the first character (Hour)

blinks.

8. The corresponding hour can now be

entered by pressing the MEMORY button.

(Example: 9 x presses)

1. Press the User/Time button for at least 3

seconds. The display now indicates the set

year, The last two characters are blinking.

2. The correct year can be entered by

pressing the MEMORY button. Once for

each change. (Example: 1 x press)

3. Press the User/Time button again. The

display now switches to the current date,

during which the first character (month)

blinks. Note: Holding the button down

speeds up the procedure.

4. The current month can now be entered

by pressing the MEMORYbutton. Example:

pressing 5 x advances 5 months)

4.4. Setting the time and date

This blood pressure monitor incorporates an integrated clock with date display. Time and date

are recorded along with pressure and pulse. After new batteries have been inserted, the clock

begins to run from the following setting: 2000-01-01 12:00 O’clock. You must then re-enter the date

and current time. Please proceed as follows (Example: Entering 2002-06-15 Time 09:30 AM):

DATE/TIME

MEMORY

DATE/TIME

MEMORY

DATE/TIME

MEMORY

DATE/TIME

MEMORY

TIME

9. Press the User/Time button again. The

last two characters (Minutes) now blink.

10. The minutes can now be entered by

pressing the MEMORY button. (Example: 30

xpresses advances the time from 0 to 30

minutes)

DATE/TIME

MEMORY

5. MEASUREMENT PROCEDURE

5.1. Before measuring:

• Avoid eating, smoking as well as all forms of exertion directly before the measurement. All these

factors influence the measurement result. Find time to relax by sitting in an armchair in a quiet

atmosphere for about ten minutes before the measurement.

• Remove any garment that fits closely to your upper arm.

• Always measure on the same arm (normally left).

• Compare measurements taken at the same time of day, since blood pressure changes during the

course of the day.

5.2. Common sources of error:

Note: Comparable blood pressure measurements always require the same conditions! Conditions

should always be quiet.

• All efforts by the user to support the arm can increase blood pressure. Make sure you are in a com-

fortable, relaxed position and do not flex any of the muscles in the measurement arm during the

measurement. Use a cushion for support if necessary.

• If the arm artery lies considerably lower or higher than the heart, an erroneously high or low blood

pressure will be measured! Each 15cm (6 inch) difference in height between your heart and the cuff

results in a measurement error of 10 mmHg!

• Cuffs that are too narrow or too short result in false measurement values. Selecting the correct cuff

is extremely important. Cuff size is dependent upon the circumference of the arm (measured in the

center). The permissible range is printed on the cuff. If this is not suitable for your use, please con-

tact Microlife USA. Large cuffsizes aresold separately.

Note: Only use clinically approved Microlife Cuffs!

• A loose cuff or a sideways protruding air pocket causes false measurement values.

• With repeated measurements, blood accumulates in the arm, which can lead to false results.

Consecutive blood pressure measurements should be repeated after a 1 minute pause or after your

arm has been held up in order to allow the accumulated blood to flow away.

Please note, clinical studies have proven the Microlife Averaging Mode (MAM) system with a 15 second wait

period between the second and thirdmeasurements. If you decide to retake your MAM measurement

again, be sureto wait at least one minute before repeating a MAM measurement.

DATE/TIME

4.5. Reading the set date

After all settings have been made, click the

User/Time button once. The date is briefly

displayed and then the time. The input is

now confirmed and the clock begins to run.

MONTH-DATE

5.3. Fitting the cuff

a) Pass the end of the cuff through the flat metal ring so

that a loop is formed. The Velcro closer must be facing

outwards. (Ignore this step if the cuff has already been

prepared.)

b) Place the cuff over the left upper arm so that the tube is

closer to your lower arm. Align the cuff artery mark

(arrow) over the arm artery than runs down the inner side

of the arm.

c) Lay the cuff on the arm as illustrated. Make certain that

the lower edge of the cuff lies approximately 3/4” to 1”

(2 to 3 cm) above the elbow and that the tube is closer to

the inner side of the arm.

d) Tighten the cuff by pulling the end and close the cuff by

affixing the velcro. Make sure that the cuff Index end

falls between the OK lines when the cuff is in position. If

it doesn’t, you are using the wrong cuff size.

e) There should be little free space between the arm and

the cuff. You should be able to fit 2 fingers between your

arm and the cuff. Clothing must not restrict the arm. Any

piece of clothing which does must be removed.

f) Lay your armon a table (palm upward) so the cuff is at

the same height as the heart. Make surethat the tube is

not kinked.

g) Remain seated quietly for five minutes before you begin

the measurement.

Comment:

If it is not possible to fit the cuffto the left arm, it can also

be placed on your right arm. However, all measurements

should be made using the same arm.

Averaging Mode Slide Switch:

a) If you would like to take an Averaging Mode

measurement, move the slide switch to the right.

b) Averaging Mode takes 3 measurements in

succession and calculates the result. An “A“

symbol in the display indicates that the unit is

set to the Averaging Mode.

c) There will be 15 seconds resting time in-between

each measurement. The unit will count down from 15

seconds. A beep will sound at the last 5 seconds to

remind you that the unit is about to take another

measurement.

Single mode

a) If you would like to take a single measurement, please

move the slide switch to the left.

5.5. Setting memory for user 1 or user 2

Note: Beforeproceeding make surethe unit is turned on.

User 2 symbol

User Selection

DATE/TIME

5.4. Measurement mode selection

Clinical studies demonstrate taking multiple blood pressure readings and calculating an “average”

is more likely to determine your true blood pressure. Your Microlife Averaging Mode unit allows you

to switch the unit to an Averaging Mode setting that automatically takes multiple readings!

User 1 symbol

This advanced blood pressuremonitor allows you to track blood pressure readings for 2 individu-

als independently.

a) Before taking your measurement, make sure you set the unit for the intended user. (User 1,

User 2)

b) The unit is set to User 1. Click the User/Time button to change to User 2. The symbol indicates

user 1 or user 2.

c) Click the User/Time button again to change into User 1.

One is for a single

measurement

Three is Average

Mode Selection

MONTH-DATE MONTH-DATE

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife Watch BP 03 Bedienungsanleitung

Microlife

Microlife BP AG1-40 Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife BP 3BM1-3 Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife WatchBP office Bedienungsanleitung

Microlife

Microlife BPB3 AFIB Bedienungsanleitung

Microlife

Microlife BPA7 Touch BT Bedienungsanleitung

Microlife

Microlife BPB3 AFIB Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife 3BU1-5 Bedienungsanleitung

Microlife

Microlife BP 3AC1-1 PC Bedienungsanleitung

Microlife

Microlife BPB6 Connect Bedienungsanleitung

Microlife

Microlife BP A90 Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP A2 Classic Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP A130 Bedienungsanleitung

Microlife

Microlife BP B6 Connect Bedienungsanleitung

Microlife

Microlife WatchBP 03 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung