Microlife BR W3 Comfort Bedienungsanleitung

IB BP W3 Comfort E-V11 1521

Revision Date: 2021-03-24

Wrist Blood Pressure Monitor

9192939495969798999W3 Comfort

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

EC REP Microlife UAB

P. Lukšio g. 32,

08222 Vilnius

Lithuania

Microlife BP W3 Comfort

AO-A

AO-B

AO-C

BP W3 ComfortGuarantee Card

Name of Purchaser / Ф.И.О. покупателя /

Име на купувача / Numele cumpărătorului / Jméno kupujícího /

Meno zákazníka / Ime in priimek kupca / Ime i prezime kupca /

Vásárló neve / Ime i prezime kupca / Imię i nazwisko nabywcy

Serial Number / Серийный номер / Сериен номер / Număr de

serie / Výrobní číslo / Výrobné číslo / Serijska števika / Serijski broj /

Sorozatszám / Serijski broj / Numer seryjny

Date of Purchase / Дата покупки / Дата на закупуване / Data

cumpărării / Datum nákupu / Dátum kúpy / Datum nakupa / Datum

kupovine / Vásárlás dátuma / Datum kupovine / Data zakupu

Specialist Dealer / Специализированный дилер /

Специалист дистрибутор / Distribuitor de spe-

cialitate / Specializovaný dealer / Špecializovaný predajca /

Spezializirani trgovec / Ovlašćeni diler / Forgalmazó / Ovlašteni

prodavač / Przedstawiciel

1BP W3 Comfort EN

Display

Read the instructions carefully before using this device.

Type BF applied part

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

This device was developed in collaboration with physicians and clinical tests

carried out prove its measurement accuracy to be of a very high standard.*

If you have any questions, problems or want to order spare parts please

contact your local Microlife-Customer Service. Your dealer or pharmacy

will be able to give you theaddress of the Microlife dealer in your country.

Alternatively, visit the internet at www.microlife.com where you will find a

wealth of invaluable information on our products.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol and ISO81060-2:2013.

Microlife BP W3 Comfort EN

1ON/OFF button

2Display

3M-button (memory)

4Time Button

5Battery Compartment

6Cuff

7Systolic Value

8Diastolic Value

9Pulse Rate

AT Date/Time

AK Stored Value

AL Traffic Light Indicator

AM Irregular Heartbeat (IHB) Symbol

AN Cuff Signal Indicator «ERR 1»

AO Cuff Fit Check

-A: Suboptimal Cuff Fit

-B: Arm Movement Indicator «ERR 2»

-C: Cuff Pressure Check «ERR 3»

AP Pulse Indicator

AQ Battery Display

Keep dry

Table of Contents

1. Using the Device for the First Time

• Inserting the batteries

• Setting the date and time

2. Checklist for Taking a Reliable Measurement

3. Taking a Blood Pressure Measurement

• How not to store a reading

• How do I evaluate my blood pressure?

• Appearance of the Irregular Heartbeat (IHB) Symbol

4. Data Memory

• Viewing the stored values

• Memory full

• Clearing all values

5. Battery Indicator and Battery change

• Low battery

• Flat battery – replacement

• Which batteries and which procedure?

• Using rechargeable batteries

6. Error Messages

7. Safety, Care, Accuracy Test and Disposal

• Safety and protection

•Devicecare

• Cleaning the cuff

• Accuracy test

•Disposal

8. Guarantee

9. Technical Specifications

Guarantee Card (see Back Cover)

1. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment

is on the bottom of the device. Insert the

batteries (

x 1.5 V, size

AAA

), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the time button 4.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

3BP W3 Comfort EN

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

2. Checklist for Taking a Reliable Measurement

Avoid activity, eating or smoking immediately before the measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

the feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, asshown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 23 cm (5.25 - 9.05 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

3. Taking a Blood Pressure Measurement

1. Press the ON/OFF button 1to start the measurement.

2. The cuff fit check AO on the display indicates that the cuff is

perfectly placed. If the icon AO-A appears, the cuff is fitted subop-

timally, but it is still ok to measure.

3. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

4. The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

5. During the measurement, the pulse indicator

flashes in the display.

6. The result, comprising the systolic 7and the diastolic 8blood

pressure and the pulse rate 9is displayed. Note also the expla-

nations on further display symbols in this booklet.

7. Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1until «M» AK is flashing. Confirm to delete the reading by

pressing the time button 4.

«CL» is displayed when the reading is deleted from the

memory successfully.

How do I evaluate my blood pressure?

The triangle on the left-hand edge of the display

points at the range

within which the measured blood pressure value lies. The value is either

within the optimum (white), elevated (hatched gray) or high (black)

range. The classification corresponds to the following ranges defined by

international guidelines (ESH, ESC, JSH). Data in mmHg.

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

Appearance of the Irregular Heartbeat (IHB) Symbol

This symbol AM indicates that an irregular heartbeat was detected. In

this case, the measured blood pressure may deviate from your actual

blood pressure values. It is recommended to repeat the measure-

ment.

4. Data Memory

This device automatically stores the last 30 measurement values.

Viewing the stored values

Press the M-button 3briefly, when the device is switched off. The

display first shows «M» AK and «A», which stands for the average of

all stored values.

Pressing the M-button again displays the previousvalue. Pressing the M-

button repeatedly enables you to move from one stored value to another.

Blood pressure readings with suboptimal cuff fit AO-A are not

considered in the average value.

Memory full



Pay attention that the maximum memory capacity of

memo-

ries is not exceeded.

When the

memory is full, the oldest

value is automatically overwritten with the

31st

value.

Values should be evaluated by a doctor before the memory

capacity is reached – otherwise data will be lost.

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the devicemust have been switched

off beforehand) until «CL ALL» appears and then release the button.

To permanently clear the memory, press the time button while «CL

ALL» is flashing. Individual values cannot be cleared.



Cancel deletion:

press ON/OFF button

while «

CL ALL

» is

flashing.

Range Systolic Diastolic Recommendation

1. blood pressure

too high ≥135 ≥85 Seek medical

advice

2. blood pressure

elevated 130 - 134 80 - 84 Self-check

3. blood pressure

normal <130 <80 Self-check

Information for the doctor in case of repeated appearance of

the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and

indicates when the heart rate is irregular.

5BP W3 Comfort EN

5. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AQ

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 5by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in «Section 1.».

The memory retains all values although date andtime mustbe

reset – the year number therefore flashes automatically after

the batteries are replaced.

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

6. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

Error Description Potential cause and remedy

ERR 1

Signal too

weak

The pulse signals on the cuff are too weak. Re-

position the cuff and repeat the measurement.*

ERR 2

AO-B

Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

* Please immediately consult your doctor, if this or any other problem

occurs repeatedly.

If you think the results are unusual, please read through the

information in «Section 1.» carefully.

7. Safety, Care, Accuracy Test and Disposal

Safety and protection

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device and

keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use this device close to strong electromagnetic fields such

as mobile telephones or radio installations. Keep a minimum

distance of 3.3 m from such devices when using this device.

ERR 3

AO-C

No pressure

in the cuff An adequate pressure cannot be generated in

the cuff. A leak may have occurred. Check that

the cuff is correctly connected and is not too

loose. Replace the batteries if necessary.

Repeat the measurement.

ERR 5

» Abnormal

result

The measuring signals are inaccurate and no

result can therefore be displayed. Read through

the checklist for performing reliable measure-

ments and then repeat the measurement.*

» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low The pulse is too low (less than 40 beats per

minute). Repeat the measurement.*

Error Description Potential cause and remedy

7BP W3 Comfort EN

Do not use this device if you think it is damaged or notice anything

unusual.

Never open this device.

If the device is not going to be used for a prolonged period the

batteries should be removed.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

If you suffer from a cardiac arrhythmia consult with your doctor

before using the device. See also chapter «Appearance of the

Irregular Heartbeat (IHB) Symbol» of this user manual.

The measurement results given by this device is not a diagnosis.

It is not replacing the need for the consultation of a physician,

especially if not matching the patient’s symptoms. Do not rely on

the measurement result only, always consider other potentially

occurring symptoms and the patient’s feedback. Calling a doctor

or an ambulance is advised if needed.

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed. Be aware of

the risk of strangulation in case this device is supplied with

cables or tubes.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild

detergent.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

Batteries and electronic devices must be disposed of in accor-

dance with the locally applicable regulations, not with

domestic waste.

8. Guarantee

This device is covered by a 5 year guarantee from the date of

purchase. During this guarantee period, at our discretion, Microlife

will repair or replace the defective product free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

Transport costs and risks of transport.

Damage caused by incorrect application or non-compliance with

the instructions for use.

Damage caused by leaking batteries.

Damage caused by accident or misuse.

Packaging/storage material and instructions for use.

Regular checks and maintenance (calibration).

Accessories and wearing parts: Batteries.

The cuff is covered by a functional guarantee (bladder tightness) for

2 years.

Should guarantee service be required, please contact the dealer

from where the product was purchased, or your local Microlife

service. You may contact your local Microlife service through our

website:

www.microlife.com/support

Compensation is limited to the value of the product. The guarantee

will be granted if the complete product is returned with the original

invoice. Repair or replacement within guarantee does not prolong or

renew the guarantee period. The legal claims and rights of

consumers are not limited by this guarantee.

9. Technical Specifications

This device complies with the requirements of the Medical Device

Directive 93/42/EEC.

Technical alterations reserved.

Operating conditions: 10 - 40 °C / 50 - 104 °F

15 - 95 % relative maximum humidity

Storage conditions: -20 - +55 °C / -4 - +131 °F

15 - 95 % relative maximum humidity

Weight: 112

g (including batteries)

Dimensions: 81 x 65 x 21

Cuff size: 13.5 - 23 cm (5.25 - 9.05 inches)

Measuring procedure:

oscillometric, corresponding to Korotkoff

method: Phase I systolic, Phase V diastolic

Measurement range: 20 - 280 mmHg – blood pressure

40 - 200 beats per minute – pulse

Cuff pressure display

range: 0 - 299 mmHg

Resolution: 1 mmHg

Static accuracy: pressure within ± 3 mmHg

Pulse accuracy: ± 5 % of the readout value

Voltage source: 2 x 1.5 V alkaline batteries; size AAA

Battery lifetime: approx. 320 measurements

(using new batteries)

IP Class: IP20

Reference to

standards: EN 1060-1 /-3 /-4; IEC 60601-1;

IEC 60601-1-2 (EMC); IEC 60601-1-11

Expected service life: Device: 5 years or 10000 measurements

Accessories: 2 years

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife Watch BP 03 Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife aponorm Mobil Slim Bedienungsanleitung

Microlife

Microlife aponorm Basis Plus Bedienungsanleitung

Microlife

Microlife BP A100 Plus Bedienungsanleitung

Microlife

Microlife BP 3AS1-2 null

Microlife

Microlife AFIB ADVANCED Easy Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP3NF1-2B Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP B2 Basic Bedienungsanleitung

Microlife

Microlife BP B3 AFIB Bedienungsanleitung

Microlife

Microlife BP3AQ1-1 Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife BP 3BTO-A Bedienungsanleitung

Microlife

Microlife BP AG1-30 Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife 3GY1-2N Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP AG1-10 Bedienungsanleitung

Microlife

Microlife BP 3AC1-1 PC Bedienungsanleitung

Microlife

Microlife WatchBP O3 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung