Microlife Watch BP Home Bedienungsanleitung

IB WatchBP Home V7-2 3107

Europe / Middle-East / Africa

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

Tel. +41 / 71 727 70 30

Fax +41 / 71 727 70 39

Email [email protected]

www.microlife.com

Asia

Microlife Corporation.

9F, 431, RuiGang Road, NeiHu

Taipei, 114, Taiwan, R.O.C.

Tel. 886 2 8797-1288

Fax.886 2 8797-1283

Email [email protected]

www.microlife.com

North / Central / South America

Microlife USA, Inc.

424 Skinner Blvd., Suite C

Dunedin, FL 34698 / USA

Tel. +1 727 451 0484

Fax +1 727 451 0492

Email [email protected]

www.microlife.com

➜1

➜16

➜32

➜48

➜62

➜78

➜92

Microlife WatchBP Home

IB WatchBP Home V7-2 cover 3107.qxd 8/9/07 10:49 AM Page 1

Microlife WatchBP Home

££

£

£Ó

£Î

£ÈÓx

£Ç £n

Ó{

£x

ÓÎ

ÓÓ

Ó£

Óä

£{

IB WatchBP Home V7-2 cover 3107.qxd 8/9/07 10:49 AM Page 2

Guarantee Card WatchBP Home

Name of Purchaser

Ф.И.О. покупателя

П.I.П. покупця / Inkö-

parens namn / Ostajan nimi / Forhandlers navn / Kjøpers navn

Serial Number / Серийный номер / Серiйний номер / Serie-

nummer / Sarjanumero / Serienummer / Serienummer

Date of Purchase / Дата покупки / Дата покупки / Inköpsdatum /

Ostopäivämäärä / Købsdato / Kjøpsdato

Specialist Dealer / Специализированный дилер /

Спецiaлiзований дилер / Återförsäljare / Alan kauppias /

Specialforhandler / Spesialist forhandler

1WatchBP Home EN

Display

Read the instructions carefully before using this device.

Microlife WatchBP Home EN

1ON/OFF Button

2Display

3M-Button (Memory)

4Cuff Socket

5Mains Adapter Socket

6USB Port

7Battery Compartment

8Cuff

9Cuff Connector

AT Mode Switch

AK Systolic Value

AL Diastolic Value

AM Pulse

AN Pulse Rate

AO Battery Display

AP Stored Value

AQ Morning Data

AR Evening Data

AS Date/Time

BT Mode Indication

BK Doctor Symbol

BL Out of Measurement Time

BM Relax

BN Number of stored Data

BO Delete Memory Data

Dear Customer,

The Microlife WatchBP Home is designed to provide reliable and

unbiased patients’ home readings, strictly following the European

Society of Hypertension (ESH) recommendations 1, 2. The accuracy of

the monitor has been clinically validated according to the ESH

protocol 3. Self-blood pressure monitoring by patients at home has

been endorsed by hypertension societies as an important adjunct to

the conventional office blood pressure measurements.

The doctor asks patient to take home readings for seven consecutive

working days in the «DIAG.» mode. In this mode, the device allows

for only two BP measurements to be taken in the morning (6-9 am)

and another two in the evening (6-9 pm). After completing seven

days, the device displays a symbol suggesting that the patient has to

consult his/her doctor. Pressing the memory button on the device

displays the average of all measurements after discarding those of

the first day.

In the «USUAL» mode, casual blood pressure readings can be taken

at any time of the day; up to 250 measurements can be stored.

The device has computer link capacity to display, store or print

through a computer all BP data.

Please read through these instructions carefully so that you under-

stand all functions and safety information. We want you to be happy

with your Microlife product. If you have any questions, problems or

want to order spare parts, please contact Microlife-Customer

Service. Your dealer or pharmacy will be able to give you the address

of the Microlife dealer in your country. Alternatively, visit the Internet

at www.microlife.com where you will find a wealth of invaluable

information on our products.

Stay healthy – Microlife AG!

1European Society of Hypertension recommendations for conven-

tional, ambulatory and home blood pressure measurement.

O’Brien E, Asmar R, Beilin L, Imai Y, Mallion JM, Mancia G, Mengden T, Myers M, Padfield

P, Palatini P, Parati G, Pickering T, Redon J, Staessen J, Stergiou G, Verdecchia P, on behalf

of the European Society of Hypertension Working Group on Blood Pressure Monitoring

2A tool for reliable self-home blood pressure monitoring designed

according to the European Society of Hypertension recommenda-

tions: The Microlife WatchBP Home monitor.

Stergiou G, Jaenecke B, Giovas P, Chang A, Chung-Yueh Y, Tan T, Blood Pressure Monitoring

2007, 12:127–131

3Validation of the Microlife WatchBP home device for self-home

blood pressure measurement according to the International Protocol.

Stergiou G, Giovas P, Gkinos C, Patouras J, Blood Pressure Monitoring 2007, 12:185–188

3WatchBP Home EN

Table of Contents

1. Important Facts about Blood Pressure and Self-Measurement

•How do I evaluate my blood pressure?

2. Using the Instrument for the First Time

•Activate the fitted batteries

•Setting the date and time

•Select the correct cuff

3. Selecting «DIAG.» or «USUAL» Mode

•«DIAG.» Mode

•When and how to measure?

•Evaluation

•«USUAL» Mode

4. Taking a Blood Pressure Measurement using this Instrument

•«DIAG.» Mode

•«USUAL» Mode

5. Data Memory and Evaluation

•Viewing the stored values

•«DIAG.» Mode

•«USUAL» Mode

•Clear all values

6. Data Transfer to the Computer

•Installation of the software program

•How to transfer data to the computer?

7. Battery Indicator and Battery change

•Batteries almost flat

•Batteries flat – replacement

•Which batteries and which procedure?

8. Using a Mains Adapter

9. Error Messages

10. Safety, Care, Accuracy Test and Disposal

•Safety and protection

•Instrument care

•Cleaning the cuff

•Accuracy test

•Disposal

11. Guarantee

12. Technical Specifications

Guarantee Card (see Back Cover)

1. Important Facts about Blood Pressure and Self-

Measurement

•Blood pressure is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the systolic

(upper) value and the diastolic (lower) value, are always measured.

•The instrument also indicates the pulse rate (the number of times

the heart beats in a minute).

•Permanently high blood pressure values can damage your

health and must be treated by your doctor!

•Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

•There are many causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate. Besides medication, weight loss

and exercise can also lower your blood pressure.

•Under no circumstances should you alter the dosages of

any drugs prescribed by your doctor!

•Depending on emotions, physical exertion and condition, blood

pressure is subject to wide fluctuations as the day progresses.

You should therefore take your measurements in the same

quiet conditions and when you feel relaxed!

•It is quite normal for two measurements taken in quick succession

to produce significantly different results.

•Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these situ-

ations are completely different.

•Several measurements provide a much clearer picture than just

one single measurement.

•Leave a small break of at least 30 - 60 seconds between 2

measurements.

•If you are pregnant, you should monitor your blood pressure very

closely as it can change drastically during this time!

•If you suffer from an irregular heartbeat, measurements taken

with this instrument should only be evaluated after consultation

with your doctor.

•The pulse display is not suitable for checking the

frequency of heart pacemakers!

5WatchBP Home EN

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a readout value between 150/85 or 120/98 mmHg indicates «Grade 1

Hypertension».

2. Using the Instrument for the First Time

Activate the fitted batteries

Pull out the protective strip projecting from the battery compartment 7.

Setting the date and time

Select the correct cuff

Microlife offers 3 different cuff sizes: S, M andL. Select the cuff size to

match the circumference of your upper arm (measured by close fitting

in the centre of the upper arm). M is the correct size for most people.

Table for classifying blood pressure values in adults in accordance to

the guidelines of the European Society of Hypertension (ESH) in 2003.

Data in mmHg.

Category Systolic Diastolic

Optimal < 120 < 80

Normal 120 - 129 80 - 84

High normal 130 - 139 85 - 89

Grade 1 Hypertension (mild) 140 - 159 90 - 99

Grade 2 Hypertension (moderate) 160 - 179 100 - 109

Grade 3 Hypertension (severe) > 180 > 110

Isolated Systolic Hypertension > 140 < 90

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the ON/OFF button 1.

2. You can now set the month using the M-button. Press the ON/OFF

button to confirm and then set the day.

3. Please follow the instructions above to set the day, hour and

minutes.

4. Once you have set the minutes and pressed the ON/OFF button,

the date and time are set and the time is displayed.

5. If you want to change the date and time, briefly take out one

battery and put in back, then the year number starts to flash. Now

you can enter the new values as described above.

Cuff size for circumference of upper arm

S 17 - 22 cm (6.75 - 8.75 inches)

M 22 - 32 cm (8.75 - 12.5 inches)

L 32 - 42 cm (12.5 - 16.5 inches)

3. Selecting «DIAG.» or «USUAL» Mode

Using the mode switch AT on the side of the device select between

«DIAG.» (Diagnostic) or «USUAL» (Usual) mode.

«DIAG.» Mode

The «DIAG.» mode should be selected, so that the blood pressure

measured by the patient at home is exactly recorded in accordance to

the guidelines of the European Society of Hypertension (ESH).

When and how to measure?

)Use only Microlife cuffs!

Contact Microlife Service, if the enclosed cuff 8does not fit.

Connect the cuff to the instrument by inserting the cuff connector

9into the cuff socket 4as far as it will go.

•The patient should carry out readings on 7 consecutive working

days (or normal week days), taking one measurement cycle in the

morning and one cycle in the evening. No readings should be

taken on «non-working» days (or particularly relaxing days) in

this mode!

•If possible, the measurements should be taken in the morning

between 06:00 - 09:00 and in the evening between 18:00 - 21:00.

Measure in the morning after getting up when you feel relaxed

and evening at least 15 minutes after your meal. If you are on

medication to lower your blood pressure it is important that you

take the measurements before taking your medication.

•Press the ON/OFF button 1to start the measurement cycle. Every

measurement cycle comprises 2 consecutive automatic measure-

ments. First, you will notice that the measurement mode selected

flashes on the screen. This is followed by a 60 second relaxation

period before the first measurement is taken. Then there is

another 60 second relaxation period before the second measure-

ment starts. Finally, the result of the second measurement is

displayed on the screen and both values automatically stored.

)In the «DIAG.» mode, the device accepts measurements

between 06:00 - 12:00 for morning measurements and

between 18:00 - 24:00 for evening measurements. Outside

these times, measurements cannot be taken and the appro-

priate symbol BL is displayed. This symbol also appears, if

measurements have already been recorded for this morning or

evening session, as no further measurement is necessary at

this time.

7WatchBP Home EN

Evaluation

After measurements have been carried out on 7 working days, you

should bring the monitor to the doctor for evaluation of your home

blood pressure values. The doctor will then read the values directly

from the monitor, as described in this manual.

«USUAL» Mode

In this mode, the device functions like a normal blood pressure

monitor – single measurements are automatically stored and can be

evaluated by a doctor.

4. Taking a Blood Pressure Measurement using this

Instrument

«DIAG.» Mode

Move the slide switch AT to «DIAG.» position (indicated by blue dot).

)The device automatically recognises, when measurements

have been carried out on 7 days. The doctor symbol BK will

flash on the screen, if an attempt is made to carry out more

measurements.

)Select the «USUAL» mode to take and store measurements at

any times (outside the time range of the «DIAG.» mode, for

any additional measurement or after completion of the diag-

nosis phase).

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

2. Sit down for at least 5 minutes before the measurement - and

relax.

3. Always measure on the same arm – the arm that gives higher

readings.

4. Remove close-fitting garments from the upper arm.

5. Always ensure the cuff is positioned correctly.

•Fit the cuff closely, but not too tight.

•Make sure that the cuff is 3 cm (1 inch) above your elbow

with the tube on the inside of your arm.

•Support your arm so it is relaxed.

•Ensure that the cuff is at the same height as your heart.

6. Press the ON/OFF button 1to start the measurement.

7. The «DIAG.» symbol flashes to confirm the correct mode selec-

tion. Then a 60 second count down starts to make sure that you

are relaxed before the measurement. the last 5 seconds are

indicated by beep sounds.

«USUAL» Mode

Move the slide switch AT to «USUAL» position (indicated by green dot).

Follow the same instructions as given for «DIAG.» mode.

5. Data Memory and Evaluation

Data measured in the «DIAG.» or «USUAL» mode is stored sepa-

rately from each other.

Viewing the stored values

With the monitor switched off, move the switch AT to the mode with

the data you want to view, then press the M-button 3.

8. The cuff will now pump up automatically. Relax, do not move

and do not tense your arm muscles until the measurement is

completed. Breathe normally and do not talk.

9. When the correct pressure is reached, the pumping stops and

the pressure falls gradually. If the required pressure was not

reached, the instrument will automatically pump some more air

to the cuff.

10. During the measurement, the heart symbol AN flashes in the

display and a beep sounds every time a heartbeat is detected.

11. After the first measurement is completed, the 60 second count

down starts again to relax between the measurements. Then

the second measurement starts automatically. If an error

occurs, the measurement is automatically repeated.

12. The result, comprising the systolic AK and the diastolic AL

blood pressure and the pulse AM is displayed and longer beep

is heard. Note also the explanations on further displays in this

booklet.

13. At the end of a measurement, this instrument automatically

stores each result, including date and time.

14. When the measurement has finished, remove the cuff.

15. Switch off the instrument. (The monitor does switch off auto-

matically after approx. 1 min.).

)You can stop the measurement at any time by pressing the

ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-

sure sensation).

)In this mode, the device functions like a normal blood pressure

monitor – single measurements are automatically stored and

can be evaluated by a doctor.

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife BP A6 BT Bedienungsanleitung

Microlife

Microlife BPB6 Connect Bedienungsanleitung

Microlife

Microlife BP W90 Bedienungsanleitung

Microlife

Microlife BP N2 Easy Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP3NC1-1W Bedienungsanleitung

Microlife

Microlife BP A100 Plus Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Microlife

Microlife BP B1 Classic Bedienungsanleitung

Microlife

Microlife BP W2 Slim Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP B3 Comfort PC Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife WatchBP Home A Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP B1 Classic Bedienungsanleitung

Microlife

Microlife BP AG1-20 Bedienungsanleitung

Microlife

Microlife WatchBP Home A Bedienungsanleitung

Microlife

Microlife BP3MY1-1P Bedienungsanleitung

Microlife

Microlife WatchBP Home S Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung