Microlife FR1DQ1-B Bedienungsanleitung

FR1DQ1-B

Infrared Forehead Thermometer

Distributed by:

Microlife USA, Inc.

1617 Gulf to Bay Blvd.,Floor 2 Clearwater,FL

33755，UNITED STATES

Phone:(727)-442-5353

www.microlifeusa.com

Made in China

○

8○

9○

10 ○

○

12 ○

13 ○

14 ○

15 ○

○

17 ○

18 ○

19 ○

○

21 ○

22 ○

23 ○

○

25 ○

26 ○

○

1Measuring sensor

○

2Tracking light

○

3Display

○

4START/IO button

○

5 MEMO button

○

6MODE

○

7Battery compartment cover

○

8All segments displayed

○

9Ready for measuring

⑩Start the measurement

⑪Measurement complete

○

12 Body mode

○

13 Object mode

○

14 Low battery indicator

○

15 Changing between Celsius and Fahrenheit

○

16 Recall mode

○

17 Recall the last 30 readings

⑱Measured temperature too high

⑲Measured temperature too low

○

20 Ambient temperature too high

○

21 Ambient temperature too low

○

22 Error function display

○

23 Blank display

○

24 Flat battery

○

25 Date/Time

○

26 Beeper function setting

○

27 Protective cap

Read the instructions carefully before using this device

Type BF applied part

Overview

This Microlife thermometer is a high-quality product incorporating the latest technology and tested in accordance with

international standards. With its unique technology, this device can provide a stable, heat-interference-free reading with

each measurement. The device performs a self-test every time it is switched on to always guarantee the specified accuracy

of any measurement. This Microlife thermometer is intended for measurement and monitoring not only the temperature

of forehead of human body,but also the temperature of object. This thermometer has been clinically tested and proven to

be safe and accurate when used in accordance to the operating instruction manual. Please read through these instructions

carefully in order for you to understand all functions and safety information.

Indication For Use

The Microlife Infrared Forehead Thermometer Model FR1DQ1-B is intended for the intermittent

measurement and monitoring of human body temperature. The device is indicated for use by people of all ages in the

home. The device can be used in connection with a smart phone running the «Microlife Connected Health +» APP.The

memory data can be transferred to the smart phone via Bluetooth.

Table of Contents

The Advantages of this Thermometer

•

Measures in a matter of seconds

•

Measurement with distance control

•

Multiple uses (wide range of measurement)

•

Accurate and reliable

•

Gentle and easy to use

•

Multiple readings recall

•

Safe and hygienic

•

Fever alarm

•

Guidance system for self-measurement

•

Bluetooth function

Important Safety Instructions

How this Thermometer measures Temperature

Control Displays and Symbols

Setting Date, Time and Beeper Functions

Changing measurement mode

Directions for Use

•

Measuring in body mode with distance control

•

Measuring in object mode without distance control

Changing between Celsius and Fahrenheit

How to recall & delete 30 readings in Memory Mode

10.

Bluetooth® Function

-App Quick start guide

-Downloading the «Microlife Connected Health+» App

-Setup User Profile

-Transfer Data

-Bluetooth® Icon Indicator

-Notes

-Wireless communication interference

11.

Error Messages

12.

Cleaning and Disinfecting

13.

Battery Replacement

14.

Guarantee

15.

Technical Specifications

16.

www.microlife.com

1. The Advantages of this Thermometer

Measures in a matter of seconds

The innovative infrared technology allows the measurement without even touching the object. This guarantees safe

and sanitary measurements within seconds.

Measurement with distance control

The device will show good on display when the device detects the distance is appropriate within 5 cm.

Multiple uses (wide range of measurement)

This thermometer offers a wide range of measurement from 0.1 – 99.9 °C / 32.2 - 211.8 °F, meaning the unit can be

used to measure body temperature or it also has a feature allowing it to be used to measure surface temperature of

the following examples:

•

Milk surface temperature in a baby's bottle

•

Surface temperature of a baby's bath

Accurate and reliable

The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is

accurate and reliable.

Gentle and easy to use

•

The ergonomic design enables simple and easy use of the thermometer.

•

This thermometer can even be used on a sleeping child without causing any interruption.

•

This thermometer is quick, therefore child friendly.

Multiple readings recall

Users will be able to recall the last 30 readings with a record of both time and date when entering the recall mode,

enabling efficient tracking of temperature variations.

Safe and hygienic

•

No direct skin contact

•

No risk of broken glass or mercury ingestion.

•

Children should be used under the care of adults to avoid danger caused by accidental ingestion

Fever alarm

10 short beeps with ared LCD backlight for 5secsand time and date switch every 1 sec alert the patient that he/ she

may have a temperature equal to or higher than 37.5 °C.

Guidance system for self-measurement

A blue tracking light shows the user that the device is at the right distance and ready to take a measurement.

Bluetooth function

This device connects to the «Microlife Connected Health+» App by using Bluetooth®4.2and enables monitoring of

temperature

2. Important Safety Instructions

•

Follow instructions for use. This document provides important product operation and safety information regarding

this device. Please read this document thoroughly before using the device and keep for future reference.

•

This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable

for damage caused by incorrect application.

•

Never immerse this device in water or other liquids. For cleaning, please follow the instructions in the «Cleaning

and Disinfecting» section.

•

Do not use this device if you think it is damaged or notice anything unusual.

•

Never open this device.

•

A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin

effect. The recorded temperature using this thermometer can, therefore, be unusually low.

•

Please note that before measurement, the thermometer and the person whose temperature is to be measured

should be in the room temperature for at least 30 minutes

•

If the measurement result is not consistent with the patient’s finding or unusually low, repeat the measurement

every 15minutes or double check the result by another core body temperature measurement.

•

This device comprises sensitive components and must be treated with caution. Observe the storage and operating

conditions described in the «Technical Specifications»section.

•

Ensure that children do not use this device unsupervised; some parts are small enough to be swallowed.

•

Do not use this device close to strong electromagnetic fields such as mobile telephones or radio installations. Keep a

minimum distance of 3.3 m from such devices when using this device.

•

Data Transmission: This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use this product in

locations where RF is restricted, such as on an aircraft or in hospitals. Turn off this thermometer; remove batteries

when in RF restricted areas. For further information on potential restrictions refer to documentation on the

Bluetooth usage by the FCC.

•

Protect it from:

Extreme temperatures

Impact and dropping

Contamination and dust

Direct sunlight

Heat and cold



If the device is not going to be used for a prolonged period, the batteries should be removed.

WARNING: The measurement results given by this device is not a diagnosis. It is not replacing the need for the

consultation of a physician, especially if not matching the patient’s symptoms. Do not rely on the measurement

result only, always consider other potentially occurring symptoms and the patient’s feedback. Calling a doctor or an

ambulance is advised if needed.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected

through the lens and converted to a temperature value.

4. Control Displays and Symbols



All segments displayed○

8: Press the START/IO button ○

4to turn on the unit; all segments will be shown for 1 second,

default body mode.



Ready for measuring○

9: after all segments have been show for 1 second, the unit is ready for measuring, the «°C» or

«°F» icon will keep flashing while the mode (3s body / 1s body / object), time and beep icon will be displayed.

Taking a measurement: for 3s body mode ,when the device detect the distance is appropriate (within 5cm),the

screen shows “good” ○

10 with 1 short beep ,then press START/IO button ○

4 to start measuring. For 1s mode, when

the device detects the distance is appropriate (within 5cm), the screen shows “good” ○

10 with 1short beep, then

press START/IO button ○

4 to start the measurement.



Measurement complete○

11 : The reading will be shown on the display ○

3with the «°C» or «°F» icon and the mode

icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is flashing again.



Low battery indicator○

14 : When the unit is turned on, the «battery» icon will keep flashing to remind the user to

replace the batteries.

5. Setting Date, Time, and Beeper Functions

Setting the date and time○

After the new batteries are fitted, device will enter time setting automatically. Under any status, hold “MODE”

button for 8 seconds, will enter time setting mode. Under time setting mode, first will be year setting, then Date

setting, following by time setting, (then jump back to year setting again as cycle, until “Start/IO” button be pressed

to enter stand-by mode”) with press MODE button.

1. The year number flashes in the display (1 time/per sec) to indicate year setting○

25 . Press “MEMO” ○

5button to

select year (21~40), then Press “MODE” ○

6button to confirm the years’ setting, then move to month setting.

2. Press “MEMO” ○

5button to select month (1~12), then press “MODE” ○

6button to confirm the month setting. then

move to day setting

3. Press “MEMO” ○

5 button to select day (1~31), Press “MODE” ○

6button to confirm the day setting. then move to

next setting

4. Follow the previously mentioned instructions to set the day, hours, and minutes.

5. Once you have set the minutes and pressed the START/IO button○

4, the date and time are set and the time is

displayed.

If no button is pressed for 20 seconds, the device will go back to stand-by for measurement with no date/time

information display and then switches to ready for measuring.

Press “Start/IO” button at any time-setting status, will allow to enter measuring stand-by mode directly. (If there is any

item of time-setting have not been completed, they will be show with no-information--)

Setting the beeper○

At any status, press “MODE” ○

6button for 3 seconds, will enter beep on/off setting

In “beeper on/off” setting mode

press and hold the “MODE

”

button

○

6 for 3seconds to set the beeper

○

26 .

Press the MEMO○

5 to either turn the beeper on or off. The beeper is activated when the beeper icon○

26 is

shown without across. When the beeper setting has been chosen, press the START/IO button

○

to enter the

stand-by measurement mode; otherwise, the device automatically switches to ready for measuring after 10

seconds.

6. Changing measurement mode

Press the START/IO button

○

The display

○

3 is activated to show all segments for 1second.

The default mode is 3S body mode. Press the MODE button

○

6 to switch between 3S, 1S body mode

○

and

object mode

○

13 .

7. Directions for Use

Always remove the protective cap○

27 before use.

Measuring in 3S and 1S body mode with distance control



Press the START/IO button

○

The display

○

3 is activated to show all segments for 1second.

A flashing «°C»/«°F» icon, the blinking blue tracking light○

2 and

a beep indicate that the device is ready to take

a measurement

○

10 .

Press the MODE button

○

6 to switch between 3S and 1S body mode.

Remove any hair, sweat or dirt from the forehead before measuring to ensure the accuracy of the readings.

3S body mode: Aiming the thermometer at the center of the forehead with a distance no more than 5 cm. Once

the display shows “good”, when the measuring sensor○

1 detects the distance is appropriate within 5 cm. Then

press the START/IO button and slowly scanning from forehead to temple, a long beep will verify the completion of

measurement.

1S body mode: Aiming the thermometer at the center of the forehead with a distance no more than 5 cm. Once

the display shows “good”, when the measuring sensor○

1 detects the distance is appropriate within 5 cm. Then

press the START/IO button, a long beep will verify the completion of measurement.

Read the recorded temperature from the LCD display.

For the next measurement remove the thermometer from the forehead and wait until the «°C»/«°F» icon is flashing.

Follow steps 4-5 above.

Press and hold the START/IO button

○

4for 3seconds to enter stand by ambient mode or 6 seconds to turn off the

device totally; otherwise, the device will automatically switch off after approx. 30seconds

Measuring in object mode without auto measurement

Press the START/IO button

○

The display

○

3 is activated to show all segments for 1second.

Press the MODE button

○

6 to switch to object mode.

A flashing «°C»/«°F» icon, the blinking blue tracking light○

2 and

a beep indicate that the device is ready for

measurement

○

9 .

Aim the thermometer at the center of the object you want to measure with a distance no more than 5 cm. Press

the START/IO button○

After 1seconds a long beep will verify the completion of measurement.

Read the recorded temperature from the LCD display.

For the next measurement wait until the «°C»/«°F» icon is flashing and follow steps 4-5 above.

Press and hold the START/IO button

○

4 for 3seconds to turn off the device totally, otherwise the device will



automatically switch off after approx. 30seconds.

NOTE:

Patients and thermometer should stay in similar room condition for at least 30 minutes.

•

Don't take a measurement while or immediately after nursing ababy.

•

Don't use the thermometer in high humidity environments.

•

Patients should not drink, eat or exercise before/while taking the measurement.

•

Don't move the measurement device from the measuring area before hearing the termination beep.

•

10 short beeps and a red LCD backlight alert the patient that he/ she may have a temperature equal to or higher

than 37.5°C.

•

Always take the temperature in the same location since temperature readings may vary according to

locations.

•

Doctors recommend rectal measurement for newborn infants with in the first 6 months, as all other measuring

methods might lead to ambiguous results. If using a Infrared Forehead Thermometer on those infants, we always

recommend verifying the readings with a rectal measurement.

•

In the following situations it is recommended that three temperatures are taken with the highest one taken as the

reading:

Children under three years of age with a compromised immune system and for whom the presence or absence of

fever is critical.

When the user is learning how to use the thermometer for the first time until he/she has familiarized

himself/herself with the device and obtains consistent readings.

If the measurement is surprisingly low.

•

Readings from different measuring sites should not be compared as the normal body temperature varies by

measuring site and time of day, being highest in the evening and lowest about one hour before waking up.

Normal body temperature ranges:

-Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F

- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F

- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F

-Microlife FR1DQ1: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahrenheit or Celsius. To switch the display between

°C and °F, at any status , press and hold the MODE button

○

for 3 seconds will enter °C/°F setting , In “°C/°F” setting

mode the °C/°F icon is shown on the display, change the measurement scale between °C and °F by pressing the

MEMO button

○

When the measurement scale has been chosen, press the START/IO button

○

to enter the

«ready for measuring» mode otherwise, the device automatically switches to ready for measuring after 10 seconds.

9. How to recall readings in Memory Mode

Inhaltsverzeichnis

Andere Microlife Thermometer Handbücher

Microlife

Microlife FR 1DM1 Bedienungsanleitung

Microlife

Microlife IR 120 Bedienungsanleitung

Microlife

Microlife FR 1DZ1 Bedienungsanleitung

Microlife

Microlife IFR 100 Bedienungsanleitung

Microlife

Microlife MT 710 Bedienungsanleitung

Microlife

Microlife NC 100 Bedienungsanleitung

Microlife

Microlife MT 1751 Bedienungsanleitung

Microlife

Microlife IR 150 Bedienungsanleitung

Microlife

Microlife MT 400 Bedienungsanleitung

Microlife

Microlife GoldTemp MT 1622 Bedienungsanleitung

Microlife

Microlife IFR 100 Dual Mode Bedienungsanleitung

Microlife

Microlife FR1MF1-B Bedienungsanleitung

Microlife

Microlife MT 16F1 Bedienungsanleitung

Microlife

Microlife NC150 BT Bedienungsanleitung

Microlife

Microlife IR310 Bedienungsanleitung

Microlife

Microlife IR 1DE1 Bedienungsanleitung

Microlife

Microlife MT16K1-PRO Bedienungsanleitung

Microlife

Microlife IR 1DE1 Bedienungsanleitung

Microlife

Microlife MT 500 Bedienungsanleitung

Microlife

Microlife IR 100 Bedienungsanleitung

Microlife

Microlife MT 720 Bedienungsanleitung

Microlife

Microlife NC 200 Bedienungsanleitung

Microlife

Microlife MT 1931 Bedienungsanleitung

Microlife

Microlife MT 3001 Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung