MicroNet SP907BB Bedienungsanleitung

User’s Manual

Wireless LAN USB Adapter

Model No.: SP907BB

Website:http://www.micronet.info

Content

1. Introduction.................................................................................................................................... 2

1.1. Package Contents........................................................................................................ 2

1.2. Appearance.................................................................................................................. 2

1.3. System Requirements ................................................................................................. 2

1.4. Environments ...............................................................................................................2

2. Installation ..................................................................................................................................... 4

3. Software Installation ...................................................................................................................... 6

3.1. Software Utility............................................................................................................. 7

4. Ad-Hoc (Peer to Peer) Mode Setup ............................................................................................ 11

4.1. Application 1Access the Internet without an AP..................................................... 11

4.2. Application 2Data sharing between computers......................................................16

5. Appendix ..................................................................................................................................... 17

1.Introduction

Thank you for using Micronet SP907BB. This installation guide will help you install SP907BB and

connect to the Internet quick & easy.

1.1. Package Contents

1. Micronet SP907BB Wireless LAN USB Adapter

2. Quick Installation Guide

3. Manual & Driver CD Disc

4. USB cable

1.2. Appearance

1.3. System Requirements

1. Desktop/ Laptop with USB port and CD-ROM driver

2. Operating System: Linux/ Mac OS X/ Windows 98 SE/ME/2000/XP

1.4. Environments

There are two application modes for SP907BB, the “Ad-Hoc mode” and the “Infrastructure mode”.

(For further explain, please refer to the “WLAN Application Modes” below) Different modes require

different settings. Please check the environment first.

Infrastructure mode: Via “Access Point” (AP) to connect to the Internet. This mode further gives

wireless access to Internet or data sharing under a previously wired environment.

Ad-Hoc mode: Connecting to other computer with WLAN card. This mode does not need AP to

connect to each other.

High performance antenna

LED Indicator:

Green: Connected

Blinking: Not connected

90

Ad-Hoc Mode

Ad-Hoc mode is a Peer-to-Peer mode. Without an AP, computers can also

connect to each other by SP907BB. With this mode, computers are able to share

data or connect to the Internet if one of them is already connected to.

Infrastructure

Mode

Infrastructure mode including an AP, unlike Ad-Hoc mode, enabling users to best

utilizes the frequency bandwidth of the AP.

This mode enables users to integrate wired and wireless infrastructures. Through

APs, wireless users are able to access wired resources, for example: Internet,

database, and printers.

Advantages Comparing to Ad-Hoc mode, Infrastructure mode has the following advantages:

9Longer distance: Through AP, the wireless access distance is longer.

9Roaming: The wireless devices can move within the AP support area.

9Integration of wired and wireless environment.

iMac

Load BatteryLine

On On

Battery Smart

BoostReplace

Battery

Test



 

Infrastructure modeAd-Hoc mode

2.Installation

Note: The screens showed below are from Windows 2000. For other Windows system, the steps are

the same, but the screens shown will be a little different.

1. After plugging SP907BB into your PC, it will automatically find and alert a New USB Device.

Click “Next” to continue.

2. You’ll see the following screen. Please choose the default item (with “Recommended”) and click

“Next”.





3. Please choose “CD ROM”, and insert the “Manual & Driver CD-ROM”, then click “Next”.

4. Your PC will recognize the device of “USB Wireless LAN Card”, and click “Next” to install driver.

5. Finally, click the “Finish” to leave this dialogue window.

6. After installation, please check whether the installation is success.

ÎStart→Setting→Control Panel

Double click “System”→click “Hardware”→Device manager→Network Adapters. If the install is

success, it should include “USB Wireless Lan CARD” item.



3.SoftwareInstallation

1. Insert the “Manual & Driver CD-ROM” into the CD-ROM driver of your PC, and you’ll see the

software installation window as shown below.

2. Click “Setup Driver & Utility”, and choose the “default” item through the installation process.

3. After successful installation, you’ll see the new icon appear in the icon tray.

4. The software will automatically search for available APs.

5. If the installation is fail, the icon appeared is in red color.

3.1. Software Utility

1. Click the icon and the software utility window shows up.

2. Status window allows you to change Operation Mode, Channel, SSID, Tx Rate, Int Romaing,

and Radio. It also shows the connecting signal and quality for you to adjust related

infrastructures and configurations.

3. Statistics window: It shows the real time transmitting and receiving status.

4. Site Survey window: Click “Scan” to search all available WLAN devices and their status in

current environment. Double click the device you want to connect.

5. Encryption window: SP907BB is able to provide 64/128Bit encryption.

6. Advanced window: It provides you to adjust PREAMBLE, Fragmentation Threshold, RTS/CTS

Threshold, and Power Save function.

7. Profiles window: It provides customers to change settings and save them in the configuration

file.

Inhaltsverzeichnis

Andere MicroNet Adapter Handbücher

MicroNet

MicroNet SP170 Bedienungsanleitung

MicroNet

MicroNet SP907NP Bedienungsanleitung

MicroNet

MicroNet M807GP Bedienungsanleitung

MicroNet

MicroNet SP908GK Bedienungsanleitung

MicroNet

MicroNet EtherFast 100Mbps Fiber-Optic Adapter SP2515... Bedienungsanleitung

MicroNet

MicroNet SP906GL Bedienungsanleitung

MicroNet

MicroNet SP907GK Bedienungsanleitung

MicroNet

MicroNet SP907N Bedienungsanleitung

MicroNet

MicroNet SP907NL Bedienungsanleitung

MicroNet

MicroNet SP907NS Bedienungsanleitung

MicroNet

MicroNet SP907G Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung