MicroNet SP915G Bedienungsanleitung
User’s Manual
Wireless LAN Outdoor Bridge
Model No.: SP915G
http://www.micronet.info
1
Table of Contents
Table of Contents...........................................................................................2
Package Contents..........................................................................................4
Hardware Setup..............................................................................................4
Ethernet & RS-232 Console Connector: ............................................................. 4
PSE BOX : for Power Over Ethernet (POE)......................................................... 5
Minimum System Requirements...................................................................6
Introduction....................................................................................................6
Features and Benefits........................................................................................... 7
Four Operational Modes................................................................................7
AP Mode................................................................................................................. 7
Repeater Mode ...................................................................................................... 8
Point to Point Mode .............................................................................................. 8
Point to Multi Point Mode..................................................................................... 9
Using the Configuration Menu......................................................................9
Device IP Setting ÆEthernet............................................................................. 12
AP Setting --> Wireless0 or Wireless1 .............................................................. 13
Encryption ........................................................................................................... 15
Set Encryption to Open System...................................................................................... 16
Set Encryption to Shared Key......................................................................................... 16
Set Encryption to Open System/Shared Key.................................................................. 17
Set Encryption to WPA-PSK........................................................................................... 17
Set Encryption to WPA-Enterprise(802.1x)..................................................................... 17
Point to Point Mode Setting ÆWireless0 or Wireless1................................... 18
Point to Multi Point Mode Setting ÆWireless0 or Wireless1 ......................... 19
Repeater Mode Setting ÆWireless0 or Wireless1........................................... 21
Dual Radio Setting For Simultaneous Operation............................................. 22
AP and Bridge................................................................................................................. 22
AP and AP....................................................................................................................... 22
2
Bridge and Bridge........................................................................................................... 22
DHCP Server Setting ...........................23
Fi
Vi
Re
Æ
DHCP.........................................
WAN Setting
Æ
WAN..................................................................................25
WAN Status
Æ
WAN Status.........................................................................26
Admin setting
Æ
Admin ..............................................................................27
rewall setting
Æ
Firewall..........................................................................29
rtual Server setting
Æ
Virtual Server ......................................................31
Connection Status .......................................................................................32
Firmware upgrade
Æ
Upgrade....................................................................33
set System
Æ
Reset................................................................................34
3
zWireless LAN Outdoor Bridge
zRF cable
zAC Power cable
cluded with the Outdoor Bridge will cause damage and void the
warranty for this product.
Hardware Setup
Ethernet & RS-232 Console Connector:
Package Contents
Before installing the product, please verify the following items in the package：
zQuick installation guide
zManual CD
zEthernet cable
zConsole cable
zPower-over-Ethernet injector
zAccessories
Note: Using a power supply with a different voltage than the one
in
1. Console Port --- It is used for initial setup and configuration of the device
2. LAN Port --- It is used for connecting the enclosed PSE for Power Over
Ethernet
3. WAN Port --- It used for connecting to ADSL for ISP
4
PSE BOX : for Power Over Ethernet (POE)
PSE BOX
A
C Power cable
Power Over Ethernet :
RJ-45 cable connecter PSE BOX
(POWER &DATAOUT port) and
Wireless-G Outdoor Bridge WAN or LAN
E
t
h
e
rn
et
P
o
r
t
Power LED
Link Active LED
5
Minimum System Requirements
zComputers with Windows, Macintosh, or Linux-based operating systems
with an installed Ethernet Adapter
zInternet Explorer version 6.0 or Netscape Navigator version 7.0 and
Introduction
The SP915G Outdoor Bridge covers a long operating distance, providing an
802.11b/g outdoor WLAN which enables users to access the Internet or an
organization’s network.
At up to five times the speed of previous wireless devices, you can work faster
and more increasing productivity efficiently. With SP915G,
bandwidth-intensive applications like graphics or multimedia will benefit
significantly because across the network quickly.
SP915G can be configured in seven different modes (Wireless WAN, Access
Point, Repeater (WDS), Bridge, Client Bridge, Point-To-Point,
Point-To-Multi-Point), it offers 128-bit encryption, WPA and 802.1X
authentication when used with a RADIUS server, MAC address access control,
and additional security features.
It has Dual Radio functionality for simultaneous AP and Bridge operations for
backhaul applications. It is suitable for manufacturing plants, industrial sites,
military bases, universities, hotels, airports and golf courses.
above
large files are able to move
6
Features and Benefits
zSupport IEEE 802.11b and 802.11g wireless standards
Provide dual radio to bridge wireleszs networks nd
r transmit power
thernet for deployment flexibility
Compliant with IEEE 802.11d regulatory domain t
/Console/Telnet for network management
Built-in 20KA lightning protection
zSupport multiple operation modes for access point, gateway, bridge a
repeate
zProvide up to 100mW
zSupport power over E
z
zSupport 64/128-bit WEP encryption, WPA, 802.1x and Access Control Lis
for security
zSupport SNMP/Web
z
zWeather-proof and rugged enclosure for stringent outdoor environment
Four Operational Modes
AP Mode
AP Mode
Cable/ADSL Modem
Eth WAN Port
Wireless
Internet
7
Repeater Mode
oint Mode
Repeater
Mode
Point to P
Access Point
Repeater1
Repeater2 Wireless Client
Point to Point (P2P : Wireless Bridge) Mode
L2 Switch L2 Switch
P2P-1 P2P-2
LAN1 LAN2
Wired Network Wired Network
8
Point to Multi Point Mode
Using the Configuration Menu
To configure the OUTDOOR BRIDGE, use a computer which is connected to
the OUTDOOR BRIDGE with an Ethernet cable (see the Network Layout
diagram).
First, disable the Access the Internet using a proxy server function. To
disable this function, go to Control Panel > Internet Options > Connections
> LAN Settings and uncheck the enable box.
Start your web brows ernet Ex
Type the IP address and http port of the OUTDOOR BRIDGE in the address
field
(http://192.168.2.254) and press Enter. Make sure that the IP addresses of the
OUTDOOR BRIDGE and your computer are in the same subnet.
P
L2 Switch
LAN2
Wired Network
L2 Switch
LAN3
Wired Network
P2P-1
P2P-2
PMP
LAN1
Wire Networkd
MP ( Wireless Bridge) Mode
er program (Int plorer, Netscape Navigator) .
9
A asswo
default user name is “admin”, the default password is “default”
screen will pop up and request you to enter user name and p rd. The
After the connection is established, you will see the user identification window
s shown. d to the
dress.
a
Note: If you have changed the default IP address assigne
OUTDOOR BRIDGE, make sure to enter the correct IP ad
10
Inhaltsverzeichnis
Andere MicroNet Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
