Microscan LVS-9585 Bedienungsanleitung

P/N 84-9310011-02 Rev B

LVS

9580/9585 Operating Instructions

English

LVS-9580 LVS-9585

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 2 of 27

Microscan Systems, Inc.

Tel: +1.425.226.5700 / 800.762.1149

Fax: +1.425.226.8250

to operate and/or service Microscan manufactured equipment and is not to be released, reproduced, or used for any other

purpose without written permission of Microscan.

Throughout this manual, trademarked names might be used. We state herein that we are using the names to the benefit of the

trademark owner, with no intention of infringement.

GS1 Solution Partner

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at:

www.microscan.com.

Technical Support

For technical support, e-mail:

[email protected]

Warranty

For current warranty information, see: www.microscan.com/warranty.

Microscan Systems, Inc.

United States Corporate Headquarters

+1.425.226.5700 / 800.762.1149

United States Northeast Technology Center

+1.603.598.8400 / 800.468.9503

European Headquarters

+31.172.423360

Asia Pacific Headquarters

+65.6846.1214

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 3 of 27

Table of Contents

IMPORTANT INFORMATION ..........................................................................................4

SAFETY INSTRUCTIONS................................................................................................4

ABOUT THE LVS-9580/9585...........................................................................................5

Quiet Zone ....................................................................................................................5

HARDWARE OVERVIEW ................................................................................................6

LVS-95XX SOFTWARE STEPS.......................................................................................6

Turn On the LVS-9580/9585 Camera...........................................................................9

Calibrate the LVS-9580/9585......................................................................................10

GRADING BARCODES..................................................................................................13

CLEANING INSTRUCTIONS .........................................................................................14

ENGINEERING SPECIFICATIONS................................................................................15

Supported Symbologies and Standards......................................................................16

Supported Symbologies..........................................................................................16

Supported Standards ..............................................................................................17

APPENDIX A – OPERATING THE LVS-9580 DPM VERIFIER.....................................18

APPENDIX B – OPERATING THE LVS-9585 VERIFIER..............................................23

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 4 of 27

Important Information

The LVS-9580/9585 arrives site packaged in a specially designed shipping carton. DO NOT discard this

shipping carton in case the system needs to be shipped or stored for any reason. Failure to use this

carton when returning the product to Microscan will void the warranty.

This guide is intended to help the user understand the features and functionality of the LVS-9580/9585.

Be sure to reference the following additional resources:

oRefer to the “LVS-95XX Series Software Installation Guide” for steps on installing the LVS-95XX

software. A hard copy version of the “LVS-95XX Series Software Installation Guide” is packaged

with the system and an electronic version is located on the installation media.

oRefer to the “LVS-95XX Series Barcode Quality Station Operations Manual” for comprehensive

steps on operating the LVS-95XX software. This manual is located on the installation media

packaged with the system.

For questions or concerns about the performance of the LVS-9580/9585, please contact a local

Microscan Distributor or Microscan Technical Support:

[email protected]

Phone: 1.425.203.4841

Toll Free: 1.800.762.1149

Safety Instructions

The LVS-9580/9585 has been carefully designed to provide years of safe, reliable performance. However, as

with all electrical equipment, there are some basic precautions to avoid personal injury or damage to the

system:

Before using the system, carefully read all the installation and operating instructions.

Observe all warning instruction labels on the system.

Never insert anything into the openings of the system.

Do not use the system near water or spill liquid into it.

All components used to create the system are CE approved. All circuits were designed to incorporate

maximum safety. However, any equipment using electrical voltages may cause personal injury if

improperly handled.

Do not attempt to work on the system with the USB cable connected.

To avoid damaging the system, unplug the USB cable before cleaning.

If the system ever needs repair, consult Microscan or a Microscan Distributor.

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 5 of 27

About the LVS-9580/9585

The LVS-9580/9585 is a portable, handheld barcode verifier designed for off-line verification of barcodes to

ISO/IEC standards. The LVS-9580/9585 is a 5.0 megapixel camera-based system that grades linear (1D)

and two-dimensional (2D) codes up to 3 inches (76 mm) wide and up to 2 inches (51 mm) tall (including the

quiet zone). See the “Quiet Zone” section below for more information on quiet zones.

The LVS-9580/9585 verifies barcode labels located on a variety of surfaces including corrugated cardboard

boxes, shipping containers, and on a static (non-moving) web. The LVS-9580/9585 grades barcodes in

either picket fence or ladder orientation.

Picket Fence Orientation

Ladder Orientation

The LVS-9580/9585 is 21 CFR Part 11 Compliant-Ready.

Quiet Zone

The quiet zone is a clear space preceding the start character of a barcode symbol and follows the stop

character. When reading/grading a barcode symbol, adequate space for the quiet zone must be allowed.

The required quiet zone space for each barcode varies by symbology. An error message appears on the

computer screen if not enough space has been allowed for the quiet zone.

1D Barcode Quiet Zone

2D Barcode Quiet Zone

Quiet

Zone

Quiet

Zone Quiet

Zone

Start

Character Stop

Character

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 6 of 27

Hardware Overview

The LVS-9580/9585 is comprised of the following hardware components:

Note: The image below shows the device approaching the

symbol to be verified. The four rubber feet at the corners of

the verifier window must be placed on the surface where the

symbol is printed or marked.

The position of the device shown at left more closely

approximates the orientation required in an application setting.

Important: The label shown above is 4” x 4”. The long

linear symbol on the label would not fit in the field of

view without using the Stitching Feature described in

the LVS-95XX Series Operations Manual.

LVS-9580/9585 with USB cable

and software installation flash drive.

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 7 of 27

LVS-95XX Software Steps

Refer to the sections below for steps on:

Logging in to LVS-95XX software

Turning on the LVS-9580/9585 camera

Calibrating the LVS-9580/9585

Note: Refer to the “LVS-95XX Series Software Installation Guide” for step-by-step

instructions on installing the LVS-95XX software; a hard copy version of this guide is

packaged with the system and an electronic version is located on the installation media.

1. Start the LVS-95XX software. The “Welcome” screen appears (see below).

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 8 of 27

2. Click the “Setup” tab. The “Login” box appears.

3. Enter admin (not case sensitive) in the Operator ID field and in the Password field.

4. Click “OK.” LVS-95XX Software will open.

5. Turn on the LVS-9580/9585 camera by following the steps in the next section entitled “Turn on the LVS-

9580/9585 Camera.”

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 9 of 27

Turn On the LVS-9580/9585 Camera

1. Click the “Setup” tab and select “9580/9585” in the “Camera” section (see below).

Note: When using only the LVS-9580/9585 (with no other LVS-95XX barcode verifier, such as the LVS-

9510), “9580/9585” will be the only camera listed in the “Camera” section. When using the LVS-

9580/9585 with the LVS-9510 (5 MP), both cameras appear in the “Camera” section. Select

“9580/9585.”

2. Select “Auto-Sector” in the “Grading Mode” section (see screenshot above). This allows the LVS-95XX

software to locate a barcode within the field of view and automatically draw a sector around the barcode.

3. Next, calibrate the LVS-9580/9585 (if using for the first time). See the next section for calibration steps.

Additional

camera

LVS-

9580/9585

Select the

“Auto-Sector”

option

LVS-9580/9585 Operating Instructions - English

LVS-9580/9585 Operating Instructions - English Page 10 of 27

Calibrate the LVS-9580/9585

IMPORTANT:

The LVS-9580/9585 should be calibrated regularly. The entire calibration process takes less

than 30 seconds to complete and ensures the LVS-9580/9585 is certified according to

industry standards.

The Calibrated Conformance Standard Test Card should be replaced every two years.

It is recommended to clean the LVS-9580/9585 window prior to calibration. See the

“Cleaning Instructions” section for more information.

1. To calibrate the LVS-9580/9585, click the “Calibration” tab.

2. Locate the Calibrated Conformance Standard Test Card (“test card”) that was packaged with the system

and place the test card on a flat surface.

Below is an example of an “EAN/UPC” test card.

Master Grade

barcodes

Inhaltsverzeichnis

Andere Microscan Barcode-Lesegerät Handbücher

Microscan

Microscan MS-820 Bedienungsanleitung

Microscan

Microscan MS-3 Bedienungsanleitung

Microscan

Microscan MINI Hawk Bedienungsanleitung

Microscan

Microscan MS-1 Gebrauchs- und Pflegehandbuch

Microscan

Microscan MS-Q Imager Bedienungsanleitung

Microscan

Microscan MS-4X Bedienungsanleitung

Microscan

Microscan MINI Hawk Bedienungsanleitung

Microscan

Microscan Quadrus MINI Imager Bedienungsanleitung

Microscan

Microscan HS-21 Bedienungsanleitung

Microscan

Microscan MS-4 Bedienungsanleitung

Microscan

Microscan Quadrus EZ Reader Bedienungsanleitung

Microscan

Microscan LVS-9580 Bedienungsanleitung

Microscan

Microscan MS-820 Bedienungsanleitung

Microscan

Microscan HE40T Bedienungsanleitung

Microscan

Microscan LVS-9510 Bedienungsanleitung

Microscan

Microscan MS-Q Imager Bedienungsanleitung

Microscan

Microscan HawkEye 40T Bedienungsanleitung

Microscan

Microscan HS-2D Bedienungsanleitung

Microscan

Microscan LVS-9570 Bedienungsanleitung

Microscan

Microscan HawkEye 1500 Series Bedienungsanleitung

Microscan

Microscan MS-2 Bedienungsanleitung

Microscan

Microscan MS-820 Bedienungsanleitung

Microscan

Microscan HawkEye 45T Bedienungsanleitung

Microscan

Microscan MINI Hawk Xi Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung