Microsemi Actel IGLOO Icicle Bedienungsanleitung

IGLOO Icicle Kit

Quick Start Guide

1. How to Start the demo

1.1. Upon power up, the display will default to a random pattern.

1.2. To display the message associated with the default design

shipped with the Icicle Kit:

1.2.1. Push SW1 to reset the board

1.2.2. Then press SW5 to enable and initialize the display.

1.2.3. The message ACTEL IGLOO will be displayed.

1.2.4. If this message is not displayed or flickers badly, the board

may have a manufacturing test design installed. In this case,

simply reprogram the board with the STAPL file included on the

IGLOO Icicle Kit CD.

1.3. To cause display to scroll continuously:

1.3.1. Push SW5 a second time. Further presses of SW5 will have

no affect on the display.

1.4. Once the message is scrolling, pushing SW1 will reset the board

and freeze the message.

1.5. To re-initialize the display, push SW5 once and to re-activate

the scroll, push SW5 a second time.

1.6. If the Flash*Freeze mode is initiated while the display is active,

the display retains its current state. At this point, the FPGA is no

longer driving the display. Since the information has already been

written to the OLED assembly, the display will continue to show

the same message. Upon exiting the Flash*Freeze mode, the display

will also retain its current state and function as described above.

1.6.1. In Flash*Freeze, the Current Sense LED will turn on to

show Low Current Mode.

1.6.2. The LED counter design will stop and restart from the same

count when it comes out of F*F

Table of Default Jumper Settings and Current measurement

Jumper Default

Position Comment

JP2 (1, 2) Power for VCC, current measurement ok

JP3 (1, 2) 3.3V Power for VCCI, current measurement ok

JP4 (2, 3) Flash*Freeze from SW3; position (1, 2) is for

internal Flash*Freeze (mode 2)

JP5 Empty External power source can be applied here

JP9 (2, 3) VCC is 1.2V except in programming; position (1,

2) fixes VCC

JP10 (1, 2) Applies power to VCCPLF

JP11 (1, 2) Vertical orientation for battery and USB power

Do not connect a DMM across pins (1, 2) of JP11 for current

measurement as the USB Change over circuit is sensitive to inductance.

Better to connect an external 5V supply to JP5 and then put a DMM in

current mode across (2, 3) for measuring board power.

Table for User Peripherals

Peripheral Comment AGL125 I/O Name Pin on

QN132 Pin on

VQ100

D1 LED IO96RSB1 A17 33

D2 LED IO95RSB1 B16 34

D3 LED IO94RSB1 A18 35

SW1 Reset Switch GAA2/IO67RSB1 C1 2

Clock 20MHz GFB0/IO123RSB1 A7 11

Flash*Freeze SW3 and JP4 FF/GEB2/IO105RSB1 B12 27

For other peripherals and details on the interface card, see the User Guide

Inhaltsverzeichnis

Andere Microsemi Hauptplatine Handbücher

Microsemi

Microsemi UG0786 Bedienungsanleitung

Microsemi

Microsemi DS3106DK Bedienungsanleitung

Microsemi

Microsemi ProASIC3/E Proto Kit Technisches Handbuch

Microsemi

Microsemi VSC8257 Bedienungsanleitung

Microsemi

Microsemi VSC8574 Bedienungsanleitung

Microsemi

Microsemi SmartFusion2 MSS Bedienungsanleitung

Microsemi

Microsemi PD70222EVB Bedienungsanleitung

Microsemi

Microsemi SmartFusion UG0209 Bedienungsanleitung

Microsemi

Microsemi LX1970 Bedienungsanleitung

Microsemi

Microsemi LX23224IDB Bedienungsanleitung

Microsemi

Microsemi PD-IM-7401 Bedienungsanleitung

Microsemi

Microsemi LX1792 Bedienungsanleitung

Microsemi

Microsemi VSC8489 Bedienungsanleitung

Microsemi

Microsemi PD70211EVB50FW-5 Bedienungsanleitung

Microsemi

Microsemi VSC8502 Bedienungsanleitung

Microsemi

Microsemi VSC8634 Bedienungsanleitung

Microsemi

Microsemi PD69208 Bedienungsanleitung

Microsemi

Microsemi PD70210EVB Bedienungsanleitung

Microsemi

Microsemi PD70101EVB F Series Bedienungsanleitung

Microsemi

Microsemi VSC8221 Bedienungsanleitung

Microsemi

Microsemi PD-IM-7504B Bedienungsanleitung

Microsemi

Microsemi SmartFusion2 MSS Technisches Handbuch

Microsemi

Microsemi LX7180A Bedienungsanleitung

Microsemi

Microsemi FlashPro5 Technisches Handbuch

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung