Midea FS45-23MRD Bedienungsanleitung
FS45-23MRD
USER MANUAL
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
STAND FAN
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
01
CONTENTS
0
02
1
05
06
07
1 6
1 5
1 7
1 4
1 1
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
PRODUCT INSTALLATION
OPERATION INSTRUCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DATA PROTECTION NOTICE
EN
02
Danger
This symbol indicates that there are dangers to the life and health of
persons due to extremely flammable gas.
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If you find any
damage, please contact the retailer or dealer. Please note modifications or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them in the immediate vicinity of the installation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS
EN
Caution
●
●
●
●
●
●
●
●
Read rules for safe operation and instructions carefully.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with the
appliance.
Keep electrical appliances out of reach from Children or
infirm persons. Do not let them use the appliances
without supervision.
When the appliance is not in use and before cleaning,
unplug the appliance from the outlet.
When the fan was assembled, the rotor blade guard
shall not be taken off anymore.
- Prior to cleaning, unplug the fan.
- The rotor guard shall not be dissembled/opened to
clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard with a
slightly damp cloth.
Never insert fingers, pencils, or any other object
through the grille when fan is running.
Disconnect fan when moving from one location to
another.
Indoor and household use only.
03
EN
●
●
●
●
●
●
●
If the supply cord is damaged, it must be replaced by
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid.
When the appliance is not in use and before cleaning,
unplug the appliance from the outlet.
Ensure that the fan is switched off from the supply
mains before removing the guard.
DISPOSAL: Do not dispose of electrical appliances as
unsorted municipal waste, use separate collection
facilities. Contact your local government for
information regarding the collection systems available.
If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
For non-user replaceable light sources: The light
sources in this luminaires can only be replaced by the
manufacturer or its service agent or similarly qualified
person.
The battery must be removed from the appliance
before it is scrapped；the appliance must be
disconnected from the supply mains when removing
the battery；the battery is to be disposed of safely；
this appliance contains batteries that are
non-replaceable.
04
Warning
EN
05
SPECIFICATIONS
FS45-23MRDProduct Model
Voltage
Frequency
Power
Rated Current
Power Factor
220-240V~
50/60Hz
25W
0.5A
0.5
EN
PRODUCTOVERVIEW
06
Component Name
NOTE
All thepictures inthis manual are for explanation purpose only.Any discrepancy between
the real object and the illustration in the drawing shall be subject tothe real subject.
Remove parts from the component before performing installation.
Fan head
Install
screw
Tighten
knob
Fan body
Plastic nut
Chassis
Rear grill
Plastic nut
Spinner
Cable terminal
protection box
Blade
Front grill
EN
07
PRODUCTINSTALLATION
Installation Procedures
NOTE
Before installation, first remove chasis screws from the pole, remove the Spinner and
Plastic nut from the motor shaft, and then install.
1 Chassis installation
Alignthelower pole and thechassis, and then fasten securely with chassis screws.
2 Cable terminal protection box installation
2.1 The terminal of the fan head is connected to the terminal of the fan body.
2.2 Put the inserted terminals intotheprotective box and cover the upper protective box.
2.3 Place the protectionbox with theterminal installed into thepipe hole of the fan body.
connecting
terminal male
and female
Protectionbox installation Protective box placement
EN
08
3 Fan head installation
3.1 Install and fix the fan body by way of tightening or loosening install screw.
3.2 Pull out and fix the internal pole (column) after adjusting the height by way of
tightening or loosening the knob.
4 Installation of Rear Grill
Alignthe holes of rear grill withthe protruded points on the motor housing.
5 Installation of Plastic Nut
Screw clockwise the plastic nut tightly to fasten the rear grill.
Install screw Height Adjustment
Height
Adjustment
Key
Clockwise
EN
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Midea Lüfter Handbücher
Midea
Midea MTF-101K Bedienungsanleitung
Midea
Midea NTH15-23AR Bedienungsanleitung
Midea
Midea FZ10-17JRA Bedienungsanleitung
Midea
Midea FSD35-19R Bedienungsanleitung
Midea
Midea AMS150F-MDLW Bedienungsanleitung
Midea
Midea FS10-S4R Bedienungsanleitung
Midea
Midea FS40-19M Bedienungsanleitung
Midea
Midea FS40-15FR Bedienungsanleitung
Midea
Midea FS40-11NR Bedienungsanleitung
Midea
Midea MF-12FT16JC Bedienungsanleitung
Midea
Midea FT30-16JB Bedienungsanleitung
Midea
Midea FT45-14AP Bedienungsanleitung
Midea
Midea NF15-18U Bedienungsanleitung
Midea
Midea NT15-13L Bedienungsanleitung
Midea
Midea FZ10-10JRH Bedienungsanleitung
Midea
Midea MF-16FT17NB Bedienungsanleitung
Midea
Midea FS40-10DR Bedienungsanleitung
Midea
Midea MSVI-40 Bedienungsanleitung
Midea
Midea MF-16FS15F Bedienungsanleitung
Midea
Midea FS40-16CR Bedienungsanleitung
