Midland CT690 Bedienungsanleitung

CT690

SPECIAL FEATURES

Group call FM radio 3 colors

display

DUAL BAND VHF/UHF TRANSCEIVER

› USER MANUAL

Index

Content of the packaging 1

Maintenance 1

Main features 2

Main controls and parts of the radio 3

LCD Display 3

Buttons and controls of the radio 4

Installing the antenna 7

Installing the belt clip 7

Installing the pattery pack 7

Releasing the battery pack 7

Main keypad controls 8

Basic operations 9

Power/volume switch 9

Transmitting and receiving 9

CALL button 9

Monitor key 9

Band Key 9

Scan function 9

VFO

A/B

BAND

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

CALL

MON

PTT

MIC

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

A B C D

1 2 3

4 5 6 0

7 8 9

key 10

Working modes 10

Menu setting 10

Menu operations 11

Functions and operations 15

Squelch level (SQL) - MENU No.0 15

Step frequency (STEP) - MENU No.1 15

Output power (TXP) - MENU No.2 15

Battery save (SAVE) - MENU No.3 15

VOX Function (VOX) - MENU No.4 15

Wide/Narrow bandwidth (W/N) - MENU No.5 16

Backlight (ABR) - MENU No. 6 16

Dual Watch Operation (TDR) - MENU No. 7 16

Time-Out-Timer (TOT) - MENU No.9 16

Receiving DCS (R-DCS) - MENU No.10 16

Receiving CTCSS (R-CTCSS) - MENU No.11 17

Transmitting DCS - (T-DCS) - MENU No.12 17

Transmitting CTCSS (T-CTCSS) - MENU No.13 17

Voice function (VOICE) - MENU No. 14 17

ANI-ID (ANI-ID) - MENU No.15 17

DTMFST (DTMFST) - MENU No.16 17

Signal code (S-CODE) - MENU No.17 18

SCAN Resume Mode (SC-REV) - MENU No.18 18

PTT-ID (PTT-ID) - MENU No.19 18

PTT ID delay (PTT-LT) - MENU No.20 18

Channel A Display Mode (MDF-A) - MENU No.21 19

Channel B Display Mode (MDF-B) - MENU No.22 19

Busy Channel Lock (BCL) - MENU No. 23 19

Auto Keypad Lock (AUTOLK) - MENU No.24 19

Shift direction (SFT-D) - MENU No.25 19

Frequency oset (OFFSET) - MENU No. 26 20

Channel store - (MEM-CH) - MENU No. 27 20

Channel Delete (DEL-CH) - MENU No.28 20

Standby backlight (WT-LED) - MENU No.29 20

RX backlight (RX-LED) - MENU No. 30 20

TX backlight (TX-LED) - MENU No.31 20

Alarm Mode (AL-MOD) - MENU No.32 21

Frequency band Shift (BAND) - Menu No.33 21

Dual Watch (TDR-AB) - Menu No.34 21

Side tone elimination (STE) - Menu No. 35 22

Side tone elimination in communication through repeater (RP-STE)

- Menu No. 36 22

Delay time of side tone elimination in communication through repe-

ater (RPT-RL) - Menu No.37 22

Display mode at the turning on (PONMSG)

Menu No.38 22

Roger beep (ROGER) - Menu No. 39 22

Reset (RESET) - Menu No.40 23

Keypad lock - Menu No.41 23

FM Radio (FM) - Menu No.42 23

Rapid Alarm (ALARM) - Menu No.43 23

Flashlight - Menu No.44 23

Monitor (MON) - Menu No.45 24

Cloning function (COPING) - Menu No.46 24

Channel/Frequency Mode conversion (VFO/MR)

Menu No.47 24

TX 1750Hz Call Tone - Menu No.48 24

Reverse function (R) - Menu No.49 24

Frequency scanning - Menu No.50 25

Channel scanning - Menu No.51 25

Automatic search FM Radio (FM) - Menu No.52 25

Cursor “▲” Conversion (A/B) - Menu No.54 26

High/low power selection - Menu No.55 26

Technical speciﬁcations 27

CT690 user’s manual | 1

Content of the packaging

• 1 CT690 transceiver with belt clip

• 1 Li-Ion battery pack 1700mAh 7.4V

• 1 fast desktop charger

• 1 wall adaptor

• Antenna

If any item is missing, please verify with your Midland dealer.

Maintenance

Your Two Way Radio is an electronic product of exact design and should be

treated with care.

The suggestions below will help you to fulﬁll any warranty obligations and to

enjoy this product for many years.

• Do not attempt to open the radio for any reason! The radio’s precision

mechanics and electronics require experience and specialized equipment;

for the same reason, the radio should under no circumstances be realigned

as it has already been calibrated for maximum performance. Unauthorized

opening of the transceiver will void the warranty.

• Do not store the Radio under the sunshine or in hot areas.

• High temperatures can shorten the life of electronic devices, and warp or

melt certain plastics.

• Do not store the radio in dusty and dirty areas.

• Keep the Radio dry. Rainwater or damp will corrode electronic circuits.

• If it appears that the Radio diuses peculiar smell or smoke, please shut o

its power immediately and take o the charger or battery from the radio.

• Do not transmit without antenna.

2 | CT690 user’s manual

Main features

• VHF and UHF bands and channel name displayed

• Operating modes: UHF/VHF, UHF/UHF, VHF/VHF

• Output power: 5W

• Up to 128 memory channels

• 50 CTCSS tones and 208 DCS codes

• 1750Hz tone for repeaters

• SOS Emergency function

• LCD display with backlight adjustable in 3 colors

• FM radio receiver (65-108MHz)

• Repeater shift

• VOX, Scan, Dual Watch functions

• Channel spacing: 25KHz/12.5KHz

• Single or group call

• Channel or frequency mode selection

• TOT (Time out timer)

• DTMF function

• Reverse function

• Setting and storing of channel names

• PTT-ID

• Busy Channel Lockout function (BCLO)

• High/low power selection

• Frequency step: 2.5/5/6.25/10/12.5/25KHz

• Frequency oset: 0-69.990MHz

• Squelch adjustable in 9 levels

• VOICE: vocal indication of the function selected

• Keypad lock

• Li-Ion 1700mAh battery pack

• 2pin Kenwood accessory jack

CT690 is available in 3 dierent colors: black, yellow or red.

CT690 user’s manual | 3

Main controls and parts of the radio

LCD Display

1. These symbols show that you set a DCS or CTCSS code in tx or rx. In tx

mode it appears while you are transmitting , while in rx mode it is shown also

in stand-by condition.

2. Received signal strength.

3. Low power selection

4. This letter is displayed when the Dual Watch function is active.

5. VOX function enabled.

6. Appears when a positive shift is activated.

7. Appears when a negative shift is enabled.

8. Reverse frequency

9. Narrow bandwidth: N = narrow / W = wide

10. This icon indicates the keypad lock. To unlock it press #/ .

11. Battery level indicator. When the battery is almost used up, the icon starts

ﬂickering and it forbids the transmission. Charge the radio.

12. Indicates the channel number that you stored

13. When the radio is in reception mode, this icon is displayed

14. Frequency band in use

15. Indicates the VFO in use and the current menu or function setting. This

icon is displayed close to the band in use.

VFO

A/B

BAND

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

CALL

MON

PTT

MIC

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

A B C D

1 2 3

4 5 6 0

7 8 9

2 3 4 5 6 7 8 9 10 11

112

4 | CT690 user’s manual

Buttons and controls of the radio

VFO

A/B

BAND

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

CALL

MON

PTT

MIC

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

A B C D

1 2 3

4 5 6 0

7 8 9

VFO

A/B

BAND

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

CALL

MON

PTT

MIC

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

A B C D

1 2 3

4 5 6 0

7 8 9

VFO

A/B

BAND

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

CALL

MON

PTT

MIC

MENU EXIT

STEP TXP SAVE SCAN

VOX WN ABR SQL

TDR BEEP TOT

1 2 3

4 5 6 0

7 8 9

A B C D

1 2 3

4 5 6 0

7 8 9

CT690 user’s manual | 5

A. Antenna

B. Flashlight

C. Power / Switch / Volume control: Rotate to switch on/o the radio and

adjust the volume

D. LCD display

E. Speaker

F. Microphone

G. Alphanumerical keypad

H. UP/DOWN keys: to select the functions/menu

I. EXIT: Push it to exit the menu and functions

J. /SCAN: Reverse frequency/SCAN. Press to activate the Reverse fre-

quency; keep it pressed to activate the SCAN function

K. 0 / SQL: quick selection of the squelch setting

L. #/ : Keypad lock. Long pressure: the keypad will be locked. Short pres-

sure: high or low power selection. L is displayed when you activate the low

power.

M. MENU: enter the MENU functions and conﬁrm the selection.

N. Led: transmission (red) ; reception (green).

O. BAND: to switch from VHF to UHF band or viceversa.

P. A/B. This control is useful to select the desired frequency, VHF or UHF.

Q. VFO/MR: to change the frequency or the channel mode

R. PTT

S. MON. Long press: to activate the Monitor function. Short press: turns the

ﬂashlight on. Press it again to issue an emergency light.

T. CALL: press it to activate the FM radio. If you keep it pressed for 5 se-

conds, you will hear an alarm note and the radio will switch to transmission

U. MIC/SP: it is used for the connection to an external accessory such as

earphones, mikes, etc. or to connect a programming cable for PC (PRG-

10, optional) .

V. 1700mAh Li-Ion battery pack

Programming software (optional)

Thanks to Midland Programming software PRG-G10, it is possible to increase

the performance of your radio or to reduce its functionality by enabling or di-

sabling some features.

For further information, please consult the Programming software manual.

6 | CT690 user’s manual

Recharge

The battery pack is not charged, charge it before use.

Initially charging the battery pack after purchase or extended storage (longer

than 2 months) will not bring the battery pack to its greatest or its normal

capacity.

1. Plug the AC adapter into the back of the charger. Then plug the power

cable of the adapter into city electric power.

2. Slide the Li-ion battery pack or radio with a Li-ion battery pack into the

charger.

Make sure the battery pack is connected with the charging terminals.

When charging starts, the led lights up red on the desktop charger.

When the battery pack is completely charged, the led turns green.

Remove the battery or the radio from the charger.

CHARGING NOTES

• After the battery is charged to its highest capacity, don’t charge anymore.

• Do not short-circuit the battery terminals or throw the battery into ﬁre.

• Never attempt to remove the casing from the battery pack.

• Please turn the power o before charging. It will aect the battery life when

charging the power-on radio.

• If the radio still shows low power after the normal charge, please change the

battery.

• The average usage time of battery pack is 13 hours. Average usage time is 5%

for transmitting, 5% for receiving and 90% for standby.

Inhaltsverzeichnis

Andere Midland Transceiver Handbücher

Midland

Midland ALAN 48 PLUS MULTI B Bedienungsanleitung

Midland

Midland Arctic Bedienungsanleitung

Midland

Midland T20 Bedienungsanleitung

Midland

Midland G14 Handbuch

Midland

Midland 70-066 Bedienungsanleitung

Midland

Midland M24-S Bedienungsanleitung

Midland

Midland PMR446 TRANSCEIVER Bedienungsanleitung

Midland

Midland Handheld VHF Marine Transceiver Bedienungsanleitung

Midland

Midland CT 710 Bedienungsanleitung

Midland

Midland G18 PRO Handbuch

Midland

Midland 13-510 Bedienungsanleitung

Midland

Midland G18 Handbuch

Midland

Midland 202M Bedienungsanleitung

Midland

Midland G15 Handbuch

Midland

Midland G8E-BT Handbuch

Midland

Midland BASE CAMP Bedienungsanleitung

Midland

Midland CT990 Handbuch

Midland

Midland Ocean Bedienungsanleitung

Midland

Midland M Zero Handbuch

Midland

Midland 77-250CXL Bedienungsanleitung

Midland

Midland ALAN 8001S EURO Bedienungsanleitung

Midland

Midland 70-066 Bedienungsanleitung

Midland

Midland G 7 Bedienungsanleitung

Midland

Midland G11 PRO Handbuch

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung