Midland XT50 PRO Bedienungsanleitung

8Km*

up to

› User’s manual

* Depending on terrain

XT50 PRO

WALKIETALKIE DUAL BAND

PMR446/LPD

XT50 PRO user’s manual | 1

Main functions

• Dual Band LPD/PMR446 transceiver

85 channels: 69 LPD + 16 PMR446

• Waterproof IPX2

• Power: 500mW ERP (PMR446); 10 mW ERP (LPD)

• Side Tone: end transmission noise muer

• LCD display with backlight

• Low battery indicator

• Auto power save: automatic current economy circuit

• 38 CTCSS and 83 DCS tones in TX and RX

• CALL button

• RRM channel (only for Italy)

• Battery life up to 12 hours

• SCAN function

• Monitor function

• Keypad lock

• Roger Beep on/o

• VOX for hands-free communications with 6 selectable levels

• 2 Pin jack for ext. mike / ext. speaker

• Recharge jack: micro USB

• Weight: 94g

• Dimensions: 102x49x30mm

• Category: B

The manufacturer, with its eort to constantly improve product quality, reser-

ves the right to change characteristics and features without prior notice.

2 | XT50 PRO user’s manual

Content of the package

• 2 transceivers with belt clip

• 2 rechargeable battery packs 700mAh

• 2-way USB cable

• 2 earphone mikes MA21Li (only in the Hobby&Work version)

Coverage

The maximum range depends on terrain condition and is obtained during use

in an open space.

The only limitation to maximum possible range are environmental factors such

as blockage caused by trees, buildings, or other obstructions. Inside a car or a

metallic constructions, the range can be reduced. Normally the coverage in

the city, with buidings or other obstructions is about 1 or 2 Km. In open space

but with obstructions like trees, leafs or houses the maximum possible range is

about 4-6 Km. In open space, without obstructions and in sight, like for exam-

ple in mountain, the coverage can be 8 Km.

Above all….Safety!

Warnings

! Do not open the radio for any reason! The radio’s precision mechanics and

electronics require experience and specialized equipment; for the same reason,

the radio should under no circumstances be realigned as it has already been

calibrated for maximum performance. Unauthorized opening of the transcei-

ver will void the warranty.

! Do not use detergents, alcohol, solvents, or abrasives to clean the equipment.

Just use a soft, clean cloth. If the radio is very dirty, slightly dampen the cloth

with a mixture of water and a neutral soap.

XT50 PRO user’s manual | 3

Identifying the parts

Display

1. Selected channel

2. VOX - Function activated

PTT

SPK

MIC

XT50 PRO

- Keypad lock activated

4. H/L - Indicates the high / low power selection in transmission (only in

PMR band)

PTT

SPK

MIC

XT50 PRO

- Battery status indicator

6. RX - Radio in rx mode (busy channel)

7. TX - Radio in transmission (PTT pressed)

8. DCS/CTCSS - Type of sub-audio tone selected

9. Code of the selected CTCSS or DCS tone (CTCSS: 1-38; DCS: 1-83)

10. PMR - This simbol indicates that the radio is operating on the PMR446

channels

PTT

SPK

MIC

XT50 PRO

5 6

310

4 | XT50 PRO user’s manual

Transceiver

PTT

SPK

MIC

XT50 PRO

PTT

SPK

MIC

XT50 PRO

PTT

SPK

MIC

XT50 PRO

109

XT50 PRO user’s manual | 5

1. Antenna

2. LCD display

3. MENU/

PTT

SPK

MIC

XT50 PRO

- Press this control to turn on/o the unit or to enter the

radio’s menu

4. CALL/ – Press this button to lock the keypad or to send out a call si-

gnal.

5. ▲-▼ controls - use these buttons to adjust the volume, select the chan-

nels and functions.

6. Microphone

7. Built-in Speaker.

8. MON/SCAN - With this button you can enable/disable the Scan and

Monitor functions.

9. SPK | MIC (under the protective cover) - To connect to external audio

devices such as microphones, headphones, etc.

10. PTT - Press to transmit.

11. USB port for the recharge of the radio

12. Battery and battery compartment. The transceiver accepts the supplied

rechargeable battery pack or 3 x AAA alkaline/ rechargeable batteries.

The supplied battery packs must be recharged before the ﬁrst use (see the

section “Recharge” for more info).

Installing/removing the battery pack

1. Remove the belt clip;

2. Open the battery compartment;

3. Remove or insert the battery pack;

4. Close the battery cover and ﬁx the belt clip.

6 | XT50 PRO user’s manual

Let’s communicate!

To turn on/o the radio

Hold down MENU/ for 3 seconds.

Channel selection

Press once the Menu button and then select the desired channel by the ▲/▼

buttons. Press PTT to conﬁrm the selection. Remember that both radios must

be set on the same channel.

Transmission

Keep pressed the PTT button. The display will show “Tx” and “to”. Release the

PTT and the radio beeps to conﬁrm to other users that your transmission has

ﬁnished ( ‘Roger Beep’, see paragraph).

Reception

Simply release the PTT button. When you receive a signal “Rx” is displayed.

Volume adjustment

Press the ▲/▼ to adjust the volume at the desired level.

button

This feature is very useful to avoid accidental pressure of the buttons. Press and

hold the “/CALL” button for more than 3 seconds. The icon conﬁrms that

the keypad lock is activated. Only PTT and /CALL will still be active. Repeat

the same procedure to unlock the keypad.

Menu button

The following functions can be selected by pressing the Menu button:

• VOX

• Roger Beep on/o

• Channel setting

• CTCSS/DCS tone setting

• Keypad Beep

• High/low power selection (PMR band)

• Tone selection for the CALL feature

XT50 PRO user’s manual | 7

VOX function and its sensitivity

The VOX function lets you open the transmission by voice without the use

of the PTT button. To get the most use from the VOX feature you must ﬁrst

determine what sensitivity (noise level) is needed to activate the VOX.

Push the Menu button until “VOX” blinks on the display. Select the desired

VOX level by means of the ▲/▼ buttons .

Press the PTT or wait 3 seconds as conﬁrmation.

VOX can be adjusted in 6 positions:

• Level 1 has the highest sensitivity

• level 6 has the lowest one.

To disable the VOX mode

Press the Menu button until the display shows “VOX”. Select “OF” by means

of the ▲/▼ buttons and then push PTT to conﬁrm.

To use the VOX with the optional headset, move the small switch of the he-

adset to the VOX position. Move it back to PTT position if you don’t use the

VOX function.

Roger Beep: End transmission tone

When the PTT is released the radio will beep to conﬁrm to other users that

your transmission is ﬁnished. This feature is enabled by default.

To disable it:

1. Press the Menu button till the display shows “rb”

2. Select “oF” by means of the ▲/▼ buttons.

3. Conﬁrm your selection by pushing the PTT button.

PMR446/LPD channel setting

Press once the Menu button and then select the desired channel by the ▲/▼

buttons. Press PTT to conﬁrm the selection.

CTCSS tones selection

XT50 PRO can receive in two modes:

a. Open trac: in this case you will hear any communication transmitted on

the selected channel;

b. Group mode CTCSS/DCS: CTCSS/DCS tones are access keys that allow

you to receive only messages coming from parties using the same channel

and code. The speaker will remain muted until the correct tone is received.

8 | XT50 PRO user’s manual

To activate 1 of 38 dierent CTCSS/83 DCS tones in RX and TX

1. Turn on the radio.

2. Select the desired channel.

3. Press twice MENU until the Display shows oF (blinking on the right side).

4. By pushing the ▲/▼ controls the display will show CTCSS (blinking) or

5. DCS (blinking); press MENU to enter the CTCSS or DCS tones. Now

6. select the desired tone with the ▲/▼ keys.

7. To conﬁrm the setting, press the PTT key or wait for approximately 5 se-

conds.

Key tones

To deactivate the keypad beep, follow these steps:

1. Press MENU button, until “bP on” is displayed.

2. Use the ▲/▼ buttons until the display shows “bP of”.

3. Conﬁrm by pushing the PTT or wait for 5 seconds.

Now you won’t hear any beep at the pressure of any button.

CALL function

XT50 PRO can send an audio signal to other users, by pressing CALL/ .

You can choose amongst 5 dierent call tones:

1. Push the MENU button 6 times, until the display shows “CA 1”.

2. By pushing ▲/▼ you will hear the 5 pre-set melodies.

3. Conﬁrm by pressing the PTT key or wait for 5 seconds.

Now, each time your XT50 PRO sends out a tone call, it will beep with the

selected melody.

Choosing high or low transmission power (PMR band)

Batteries are drained more quickly during transmission. In order to extend the

battery life you can select the low power when transmitting over short distan-

ces. Procedure:

1. Press the MENU button for 3 times and Pr H will be displayed.

2. Select Lusing the scroll buttons ▲/▼.

3. Press PTT to conﬁrm, or wait for 5 seconds.

If you want to transmit a longer distance repeat the above procedure to select

the high power. At step 2 select H. When the batteries are in good conditions,

high power is 500mW, whereas low power is 10mW.

A low battery level during transmission will reduce the performance of your

device.

Andere Handbücher für XT50 PRO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Midland Zwei-Wege-Funkgerät Handbücher

Midland

Midland ProLine PL5161 Bedienungsanleitung

Midland

Midland G 7 Bedienungsanleitung

Midland

Midland GXT895 series Bedienungsanleitung

Midland

Midland 75-822 Bedienungsanleitung

Midland

Midland MICRO MOBILE MXT500 Bedienungsanleitung

Midland

Midland X-TRA TALK MXT100 Bedienungsanleitung

Midland

Midland X-tra talk LXT560 series Bedienungsanleitung

Midland

Midland BR02 Handbuch

Midland

Midland GXT860 series Bedienungsanleitung

Midland

Midland x-talker t70 series Bedienungsanleitung

Midland

Midland 75-822 Bedienungsanleitung

Midland

Midland G9 Handbuch

Midland

Midland G-223 Bedienungsanleitung

Midland

Midland X-TRA TALK LXT110 Series Bedienungsanleitung

Midland

Midland GXT850 Series Bedienungsanleitung

Midland

Midland X-Talker T290 Series Bedienungsanleitung

Midland

Midland x-talker t70 series Bedienungsanleitung

Midland

Midland X-TRA TALK LXT535 Series Bedienungsanleitung

Midland

Midland X-Talker ALR2 Series Bedienungsanleitung

Midland

Midland LXT276 Series Bedienungsanleitung

Midland

Midland X-TRA TALK LXT380 Series Bedienungsanleitung

Midland

Midland GXT 400 Series Bedienungsanleitung

Midland

Midland LXT114VP Bedienungsanleitung

Midland

Midland X-Talker T10 Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung

Motorola

Motorola DTR410 - On-Site Digital Radio Betriebsanleitung

Motorola

Motorola PRO7550 Bedienungsanleitung