Miele Miele@home XKM 2000 KM Bedienungsanleitung

Fitting and installation instructions

Miele|home

Con|ctivity

XKM 2100 KM

M.-Nr. 07 828 230

en-GB

Warning and safety instructions .....................................3

Electrical connection...............................................5

Description of the appliance.........................................7

Connecting the communication module ...............................8

Con|ctivity......................................................10

How the Con|ctivity system works ....................................10

Establishing connection.............................................11

Con|ctivity and Miele|home ........................................12

Miele|home .....................................................13

How the Miele|home system works ...................................13

Miele|home system components .....................................13

Installation options .................................................16

Miele|home First installation.......................................17

aFirst installation of the InfoControl unit and signing on of the hob ..........17

bFirst installation of the SuperVision appliance and signing on of the hob ....19

cFirst installation of the InfoControl unit and SuperVision appliance,

signing on of the hob ...............................................21

Miele|home Installation at a later date ...............................23

fSigning on the hob to the InfoControl unit at a later date .................23

gSigning on the hob to the SuperVision appliance at a later date ...........25

Signing off the hob ...............................................26

Signing on/off KM 59** hobs........................................27

Problem solving guide ............................................29

Contents

This appliance complies with all

relevant legal safety requirements.

Improper use of the appliance can

present a risk of both personal injury

and material damage.

To avoid the risk of accidents and

damage to the appliance, please

read these instructions carefully

before installation and before using

it for the first time.

They contain important notes on its

installation, safety, use and

maintenance.

Keep these instructions in a safe

place and ensure that new users are

familiar with the content. Pass them

on to any future owner.

~Before installation, check the

appliance for visible signs of damage.

Do not install and use a damaged

appliance. It could be dangerous.

~Before connecting the appliance,

make sure that the connection data on

the data plate (voltage and connected

load) match the mains electricity

supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

~The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and

where there is any doubt, the

household wiring system should be

inspected by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

~If the appliance is supplied without a

plug, or if the plug is removed, it must

be connected to the mains electricity

supply by a suitably qualified and

competent electrician in strict

accordance with current local and

national safety regulations. The

manufacturer cannot be held liable for

damage caused by incorrect

installation or connection.

~Never open the casing of the

appliance.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user and can

cause operational faults.

Warning and safety instructions

~Installation, maintenance and

repairs may only be carried out by a

Miele authorised person in strict

accordance with current national and

local safety regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

Ensure that current is not supplied to

the appliance until after maintenance or

repair work has been carried out.

~Faulty components must only be

replaced by genuine Miele original

spare parts. The manufacturer can only

guarantee the safety of the appliance

when Miele replacement parts are

used.

~During installation, maintenance and

repair work, the XKM 2100 KM and the

hob must be disconnected from the

mains electricity supply.

~While the appliance is under

guarantee, repairs should only be

undertaken by a service technician

authorised by the manufacturer.

Otherwise the guarantee is invalidated.

~Do not connect the appliance to the

mains electricity supply by an extension

lead or a multi-socket unit. These do

not guarantee the required safety of the

appliance (e.g. danger of overheating).

~This appliance is not intended for

use by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience or knowledge, unless they

are supervised whilst using it, or have

been shown how to use it correctly by a

person responsible for their safety.

~This appliance is not a toy! To avoid

the risk of injury, keep children well

away and do not let them play with it.

They should be supervised whenever

you are working in the kitchen.

Warning and safety instructions

All electrical work should be carried

out by a suitably qualified and

competent person in strict

accordance with current local and

national safety regulations (BS 7671

in the UK).

This appliance can be connected to the

mains electricity supply either via a

plug and switched socket or via a

suitable fused spur connection unit.

The socket and on-off switch should be

easily accessible after the appliance

has been built in.

Connection to a fused spur connection

unit must be carried out by a suitable

qualified electrician only.

If the connection socket is not

accessible after installation (depending

on country) an additional means of

disconnection must be provided for all

poles. When switched off there must be

an all-pole contact gap of 3 mm in the

switch (including switch, fuses and

relays).

See data plate for connection details.

Ensure that these match the mains

supply.

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

The appliance must only be

operated when built-in. This is to

ensure that all electrical parts are

shielded. Live parts must not be

exposed.

Do not connect the appliance to the

mains electricity supply via an

extension lead. These do not

guarantee the required safety of the

appliance.

Total connected load

See data plate

Voltage and fuse rating

AC230V/50Hz

Fuse rating 10 A

Release Type B or C

Residual current device

For extra safety it is advisable to install

a suitable residual current device with a

trip current of 30 mA.

Electrical connection

To change the mains connection

cable

If the connection cable is damaged, it

must be replaced by cable type H 05 V

V-F (pvc insulated), available from the

Miele Spare Parts Department.

If the appliance is connected via a

fused spur, the electrical cable must

only be replaced by a suitable qualified

electrician in accordance with local and

national safety regulations.

Connection data is quoted on the data

plate.

Important UK

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue = neutral

Brown = live

WARNING

THIS APPLIANCE MUST BE

EARTHED

The earth lead must be connected

to the connection marked -.

Electrical connection

Miele|home connection box

aShaft with communication module fitted

bData line

cConnection point for mains connection cable

1 connection cable with plug

1 connection cable with wire end ferrules

Accessories supplied:

Adapter

Description of the appliance

Data line

The connection point for the data line is located underneath

the hob. The following illustrations are examples. The

connection position may vary.

Type 1

Type 2

Type 3

Connecting the communication module

,Data line types 1 and 2 must only be connected to the

appliance by a qualified and competent electrician in strict

accordance with current local and national safety

regulations (BS 7671 in the UK).

^Disconnect the hob from the electricity supply.

^Remove the cover from the data line connection point (see

illustration "Connecting the data line", Type 1 and Type 2).

^Connect the data line.

Use the adapter supplied for connection types 1 and 2.

^Replace the cover and secure with the screws (Type 1 and

Type 2 connections).

^Connect the Miele|home connection box to the mains

supply.

,The Miele|home connection box must not be screwed

to the underside of the hob or to an oven or cooker!

Connecting the communication module

How the Con|ctivity system works

Con|ctivity is the communication between the hob and the

cooker hood.

The operation of the cooker hood is automatically controlled

by the operating status of the hob.

For communication to take place, the cooker hood must be

fitted with communication module XKM 2000 DA aand the

hob must be fitted with communication module

XKM 2100 KM b.

The hob transmits information about its operating status to the

cooker hood via the household power supply (Powerline) c.

The XKM 2000 DA ais fitted inside the cooker hood and

will get its power supply from the cooker hood.

The XKM 2100 KM bhas its own electrical connection to

the mains independent from the hob and needs to be

connected to the same ring main circuit that the cooker

hood is connected to for communication to take place.

Con|ctivity

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miele Kochfeld Handbücher

Miele

Miele CS1326 Y Bedienungsanleitung

Miele

Miele SmartLine CS 7611 Bedienungsanleitung

Miele

Miele KM6357 Montageanleitung

Miele

Miele KM 6113 Bedienungsanleitung

Miele

Miele KM 391 G Bedienungsanleitung

Miele

Miele KM 7678 FR Bedienungsanleitung

Miele

Miele KM 6367 Montageanleitung

Miele

Miele KMR 1124 Bedienungsanleitung

Miele

Miele KM 520 Bedienungsanleitung

Miele

Miele CS 1234 Bedienungsanleitung

Miele

Miele KM 6207 Bedienungsanleitung

Miele

Miele KM 2054 Technisches Datenblatt

Miele

Miele KMR 1124-3 LP EDST/CLST Bedienungsanleitung

Miele

Miele CS 1112 Bedienungsanleitung

Miele

Miele CS 1034-1 Bedienungsanleitung

Miele

Miele SmartLine CS 7101-1 Bedienungsanleitung

Miele

Miele KM 2014 Bedienungsanleitung

Miele

Miele CS 1223-1 Bedienungsanleitung

Miele

Miele KM 6389 Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Miele

Miele KMR 1124LP Bedienungsanleitung

Miele

Miele CSAF 400 Bedienungsanleitung

Miele

Miele KM 7999 FR Bedienungsanleitung

Miele

Miele ProLine CS 1212-1 Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Blomberg

Blomberg MKN 24201 W Bedienungsanleitung

Progress

Progress PAI3101F Bedienungsanleitung

Hotpoint Ariston

Hotpoint Ariston PKL 641 IX/HA Bedienungsanleitung