Mighty GPS NV-X Bedienungsanleitung
MightyGPS NV-X Tracker
USER MANUAL
Preface
This manual shows how to operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Please note that specification and information are subject to changes
without prior notice in this manual. Any change will be integrated in the latest release. The manufacture
r
assumes no responsibility for any errors or omissions in this document.
Content
1 Summary ------------------------------------------------------------------------------------------------- 3
2 Application ------------------------------------------------------------------------------------------ 3
3 Hardware Description
3.1 Wires Connection ---------------------------------------------------------------------------- 3
3.2 Interior ------------------------------------------------------------------------------------- ------- 4
3.3 External Relay Connection ---------------------------------------------------------- ----- 4
4 Specifications ---------------------------------------------------------------------------------------- 4
5 Battery and SIM Card Installation ------------------------------------------------------------------ 4
6 Startup ------------------------------------------------------------------------------------- ----------- 5
7 Usage --------------------------------------------------------------------------------------------------- -- 5
8 Fortifying Mode --------------------------------------------------------------------------------- --------- 5
8.1 Engine Started Alert ---------------------------------------------- --------- -------- 5
8.2 Movement Alert --------------------------------------------------------- --------- -------- 6
8.3 Power Cutoff Alert-------------------------------------------------------- --------- -------- 6
8.4 Remote Engine Cut-off Fuction--------------------------------------- --------- -------- 6
8.5 Checking the Working Status ----------------------------------------- --------- -------- 7
9 Tracking Mode -------------------------------------------- --------- -------- -------- 8
9.1 Initialization ---------------------------------- --------- -------- 9
9.2 Change the Password ---------------------------------- --------- -------- 9
9.3 Authorization ---------------------------------- --------- -------- 9
9.4 Auto Track ---------------------------------- --------- -------- 10
9.5 Geo-fence ---------------------------------- --------- -------- 10
9.6 Movement Alert ---------------------------------- --------- -------- 11
9.7 Overspeed Alert ---------------------------------- --------- -------- 11
9.8 IMEI Checking ------------------------------ --------- -------- 12
9.9 SOS --------------------------------- --------- -------- 12
9.10 Low Battery Alert --------------------------- --------- -------- 12
9.11 Hidden Number Tracking ---------------------------- --------- -------- 12
9.12 SMS Center ------------------------------ --------- -------- 13
9.13 GSM ID -------------------------------------------------------------------- 13
9.14 Motion Sensor -------------------------------------------------------------------- 13
9.15 SD Card Function -------------------------------------------------------------------- 14
10 Monitoring Mode ------------------------------ --------- -------- 14
11 GPRS Setting -------------------------------------------------------------------- 15
12 Cautions --------------------------------------------------------------------- 17
13 Faults & Solutions --------------------------------------------------------------------- 18
1 Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can
locate and monitor any remote targets by SMS or GPRS,and guard against theft o
f
Vehicle.
2 Applications
Rental vehicle / Fleet management etc
Covert tracking
3 Hardware Description
3.1 Wires Connection
6
5
1
8
7 4
3
2
Wire 1: LED indicator of working status
Wire2: ACC ‘-‘
Wire3 ACC ‘+’
Wire 4: 12V ‘+’
Wire 5: 12V ‘-‘
Wire 6: Microphone
Wire 7: On/off & SOS button
Wire 8: external relay plug
3.2 Interior
3.3 External relay Connection
4 Specs.
Content Specs.
Dimension. 80mm x 60mm x 25mm
Weight 100g
Network GSM/GPRS
Band 850/1800/1900Mhz or 900/1800/1900Mhz
GPS chip SIRF3 chip
GSM/GPRS module Simcom300/Simcom340
GPS sensitivity -159dBm
GPS accuracy 5m
Time To First Fix Reacquisition 0.1s Cold status 45s
Warm status 35s
Hot status 1s
Car charger 12—24V input
5V output
Wall charger 110－220V input
5V output
Battery Chargeable changeable 3.7V 1100mAh Li-ion batt
e
Standby 50hours
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
Put SIM card A here
(front side)
Put SIM card B here
(back side)
Put a SD card here
External relay
Connect here with the
tracker (ref Wire 8 )
Wire for car oil connecting
Wire for car oil
connecting
5 Battery and SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The
SMS message must in Text format, can’t be identified for PDU format.
Steps:
1 Open the cover with GSM/GPS antennas, pick out the mainboard,and put one or two
SIM cards into the holder.
2 Put in a SD card beside the SIM card B (at the back side of the maniboard).
3 Connect the battery with the mainboard.
SIM card A
SIM card B
SD card
connect mainboard
with the battery
6 Startup
Put the SIM card,SD card and battery in place.
Connecting the battery with the unit outdoors,while the indicator keep flashing quickly.
In 40-60 seconds, the unit will begin to work and acquire the GSM signals as well as
the GPS signals. The indicator keep flashing every 1 second when the unit has
received the signals, otherwise it will keep on.
When this unit receives GPS signals normally, you can use it and do all the following
settings.
7 Usage
The tracker has three working modes: Fortifying mode, Tracking mode and
Monitoring mode. Modes switch between “fortifying”, “ tracking” and
“monitoring”.
When power on the tracker, the default mode is “Fortifying” mode, you can send
“ tracker+password” to switch to tracking mode, or send “monitor+password” to switch
to monitoring mode, or “fortify+password” back to fortifying mode.
8 Fortifying Mode
When turn on the tracker, the default mode is Fortify mode.In fortifying mode, you can
call the tracker to activate the “protection” for your loved car or vehicle. The indicator will
flash every 4 seconds when the “protection “ is activated.
While the “protection” will be deactivated when you dial up the tracker again, the
indicator will flash every 1 second when the deactivation is done.
Remark: If ACC is connected, then you can not activate the “protection” for your car.
The tracker will be triggered to send an alert under one of following conditions:
8.1 Engine Started Alert
In fortifying mode, the tracker will start the ACC examine automatically. It will warn up
the user when the engine is started.
Alert format: fortify! + lat./long.
It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop
it.
8.2 Movement Alert
This function is using for the owner to get an alert when the tracker moves out of a
restricted district (500m radius),
Response SMS format: move!+lat./long..
It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop
it.
8.3 Power Cutoff Alert
In this mode, the tracker will warn up the user automatically when the main power is cut
off unwontedly,such as if someone cut the wire connected the car with the device, it will
alert “Battery with coordinates”.
Alert format: battery! + lat./long.
It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop
it.
NOTE: These three alerts only occurred when the “ protection ” is activated in fortifying
mode.
8.4 Remote Engine Cut-off Function
This function is using for the car owner to send a SMS remotely to stop a moving vehicle.
8.4.1 Setup: Send SMS command powercar123456 00 to the tracker to cut off oil and
power of the car to stop the car.
Reply format: powercar ok. You will receive such a reply if the setting is successful.
8.4.2 Cancel: Send SMS command powercar123456 11 to the tracker to restartup the
car again.
Reply format: powercar ok. You will receive such a reply if the setting is successful.
8.5 Checking the Working Status ( fortify or no fortify
)
You can send SMS command “fortified123456” to tracker, it will report “ fortifying “ or “
no fortify “ to you.
Reply “no fortify” means out of Fortify mode, Reply “fortifying” means under Fortify mode.
When the tracker in the monitoring mode or trackering mode, send SMS command
“fortify123456” to the traker,it will reply you “fortify ok”, make a call to it will under Fortify
mode.
9 Tracking Mode
9.1 Initialization
Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the
settings. (default password: 123456)
9.2 Change the Password
Send SMS password+old password+space+new password to change the password.
(default password: 123456)
Remark:
Inhaltsverzeichnis
