MikroTik Chateau LTE18 ax Bedienungsanleitung

User Manual

Chateau LTE18 ax (S53UG+5HaxD2HaxD-TC&EG18-EA)

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be

familiar with standard practices for preventing accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

Failure to use the correct hardware or to follow the correct procedures could result in a hazardous

situation for people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or

hot environments.

Use only the power supply and accessories approved by the manufacturer, which can be found in the

original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device.

Please use this product with care and operate at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging

the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal

frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)

requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and

European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik

device should be installed and operated no closer than 20 centimeters from your body, occupational

user, or the general public.

Quickstart

Please follow these quick steps to set up your device:

Connect external antennas to the SMA connector (The antennas are provided in the package, see

"Antenna usage");

Insert a micro SIM card into the slot located under the device, the SIM card is not provided with the

package;

Connect your computer to one of the Ethernet ports;

Connect the power adapter to the DC jack;

Once the device is powered on and the PC is connected to the device, open https://192.168.88.1 in your

web browser to start the configuration;

User name: admin and there is no password by default you will be logged in automatically to the Quick

Set screen (or, for some models, check user and wireless passwords on the sticker);

We recommend clicking the "Check for updates" button on the right side and updating your RouterOS

software to the latest version to ensure the best performance and stability, Must have a valid SIM card

inserted;

To manually update the device, please go to https://mikrotik.com/download

Select the v7 ARM64-packages (routeros-x.x-arm64.npk, wifiwave2-x.x-arm64.npk) for this device

and download them onto your PC;

Upload downloaded packages to the WebFig Files menu and reboot the device. By upgrading your

RouterOS software to the latest version, you can ensure optimal performance, stability, and security

updates;

To personalize your wireless network, SSID can be changed in the fields "Network Name";

Choose your country on the left side of the screen in the field "Country", to apply country regulation

settings;

Set up your wireless network password in the field "WiFi Password" the password must be at least

eight symbols;

Set up your router password in the bottom field "Password" to the right and repeat it in the field

"Confirm Password", it will be used to log in next time;

Click on the "Apply Configuration" to save changes;

The following RouterOS "npk" packages are required for the core functionality of the product:

wifiwave2, system.

Connecting with a mobile app

Use your smartphone to access your router through WiFi.

Insert the SIM card and power it on the device.

Scan the QR code with your smartphone and choose your preferred OS.

Connect to the wireless network. SSID starts with MikroTik and has the last digits of the device's MAC

address.

Open application.

By default, the IP address and user name will be already entered.

Click Connect to establish a connection to your device through a wireless network.

Choose Quick setup and the application will guide you through all basic configuration settings in a

couple of easy steps.

An advanced menu is available to fully configure all necessary settings.

Expansion slots and ports

1. Reset button.

2. Powering DC jack 2.0 mm.

3. Five Gigabit ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight

or crossover cables can be used for connecting to other network devices.

4. USB type-A.

5. SIM slot for Micro sim card.

6. Mode button.

7. A cover for an external SMA antenna connector is not provided for models with antennas.

8. WPS Sync button.

Product code S53UG+5HaxD2HaxD-TC&EG18-EA.

CPU Quad-Core IPQ-6010 1.8 GHz.

CPU architecture ARM 64bit.

Size of RAM 1 GB.

RAM type DDR3L.

Storage 128 MB, NAND.

A number of 1G Ethernet ports 4.

A number of 2.5G Ethernet ports 1.

Micro SIM slots 1.

USB 1 USB 3.0 type A.

Switch chip model IPQ-6010.

Wireless interface model QCN-5022 (2.4 GHz), QCN-5052 (5 GHz).

Wireless 2.4 GHz 802.11ax dual-chain, 5 GHz 802.11ax dual-chain.

Wireless antenna max gain 2.4 GHz (3 dBi), 5 GHz (6 dBi).

LTE category 18 (1.2Gbps Downlink, 150Mbps Uplink).

LTE modem EG18-EA.

TAC 86981604.

LTE antenna gain 4 dBi.

LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20

(800MHz) / 28 (700MHz).

LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz).

3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink).

3G Bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz).

Dimensions 240 x 156 x 44 mm.

Operating system RouterOS v7, License level 4.

Operating temperature -40°C to +65°C.

Mounting

The device is designed to be used indoors, by placing it on the desktop.

We recommend using CAT5 shielded cable. When using and installing this device please pay attention

to the Maximum Permissible Exposure (MPE) safety distance with a minimum of 20 cm between the

radiator and your body.

Powering

A number of DC inputs 1.

DC jack input Voltage 12-28 V.

Power adapter nominal voltage 24 V.

Power adapter nominal current 1.2 A.

Max power consumption without attachments 16 W.

Max power consumption 19 W.

Configuration

We recommend checking for updates frequently to receive the latest updates for your RouterOS

software to ensure the best performance and stability.

RouterOS includes many configuration options in addition to what is described in this document. We

suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case an IP

connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC

address of the device from the LAN side (all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device for reinstallation, see the section Buttons and

Jumpers.

Mode button

The mode button is located on the back of the unit, on the right side.

The Default configuration for the Mode button is dark mode - to turn off all LEDs. The button can be

configured in RouterOS to run any user-specified scripts.

Sync button

The sync button is located on the top of the unit. The WPS Sync button, if configured on the wireless

interface, can be used to connect new clients.

Press and hold the WPS button for 1 – 5 seconds to enable WPS for wireless interfaces.

Front LED status

1. Wireless network activity.

2. Ethernet port activity.

3. System LED.

4. Signal strength.

Cellular connection technology based on the System LED color:

Red: GSM

Yellow: 3G

Blue: LTE

Green: 5G NSA

Violet: 5G SA

When LTE is not connected to the network, the system LED will blink red to indicate that there is some

issue with the LTE connection. If the LTE interface is intentionally disabled (not being used), the

system LED will glow blue.

SIM slot usage

SIM card slot is designed to use with Micro SIM cards.

Nano SIM cards have different thicknesses, usage with an adapter is not recommended.

Reset button

The reset button has three functions:

Hold this button during boot time until the LED light starts flashing, and release the button to reset the

RouterOS configuration (total 5 seconds).

Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will

now look for a CAPsMAN server (total of 10 seconds).

Or Keep holding the button for 5 more seconds until the LED turns off, then release it to make the

RouterBOARD look for Netinstall servers (total 15 seconds).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button

is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Netinstall

When performing Netinstall, make sure to use the latest v7 version of both RouterOS with the

additional package wifiwave2-x.x-arm64.npk must be installed files and the Netinstall software.

Accessories

The package includes the following accessories that come with the device:

ADAPT1_ EU/US Switching Power Supply 24V, 1.2A.

CAB3_ CAT5E UTP Flat Cable, 8P8C, AWG32, 1.5m.

Antenna usage

External antenna sockets are located on the back of the device. Device comes with connected wireless

antennas, LTE antennas are not provided within the package.

Operating system support

The device supports RouterOS software version v7. The specific factory-installed version number is

indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

To avoid pollution of the environment, please separate the device from household waste and dispose of

it in a safe manner, such as in designated waste disposal sites. Familiarize yourself with the procedures

for the proper transportation of the equipment to the designated disposal sites in your area.

UKCA marking

CE Declaration of Conformity

С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение

S53UG+5HaxD2HaxD-TC&EG18-EA е в съответствие с Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за съответствие може да се намери на следния

интернет адрес: https://mikrotik.com/products

Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení S53UG+5HaxD2HaxD-

TC&EG18-EA je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k

dispozici na této internetové adrese: https://mikrotik.com/products

Hermed erklærer Mikrotīkls SIA, at radioudstyrstypen S53UG+5HaxD2HaxD-TC&EG18-EA

er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde

tekst kan findes på følgende internetadresse: https://mikrotik.com/products

Hiermit erklärt Mikrotīkls SIA, dass der Funkanlagentyp S53UG+5HaxD2HaxD-TC&EG18-

EA der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung

ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products

Με την παρούσα ο/η Mikrotīkls SIA, δηλώνει ότι ο ραδιοεξοπλισμός S53UG+5HaxD2HaxD-

TC&EG18-EA πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης

ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.com/products

Hereby, Mikrotīkls SIA declares that the radio equipment type S53UG+5HaxD2HaxD-

TC&EG18-EA is in compliance with Directive 2014/53/EU. The full text of the EU declaration

of conformity is available at the following internet address: https://mikrotik.com/products

Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico

S53UG+5HaxD2HaxD-TC&EG18-EA es conforme con la Directiva 2014/53/UE. El texto

completo de la declaración UE de conformidad está disponible en la dirección Internet

siguiente: https://mikrotik.com/products

Käesolevaga deklareerib Mikrotīkls SIA, et käesolev raadioseadme tüüp

S53UG+5HaxD2HaxD-TC&EG18-EA vastab direktiivi 2014/53/EL nõuetele. ELi

vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel

internetiaadressil: https://mikrotik.com/products

Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi S53UG+5HaxD2HaxD-TC&EG18-EA on

direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti

on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products

Le soussigné, Mikrotīkls SIA, déclare que l'équipement radioélectrique du type

S53UG+5HaxD2HaxD-TC&EG18-EA est conforme à la directive 2014/53/UE. Le texte

complet de la déclaration UE de conformité est disponible à l'adresse internet

suivante: https://mikrotik.com/products

Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa S53UG+5HaxD2HaxD-TC&EG18-

EA u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na

sljedećoj internetskoj adresi: https://mikrotik.com/products

Mikrotīkls SIA igazolja, hogy a S53UG+5HaxD2HaxD-TC&EG18-EA típusú rádióberendezés

megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a

következő internetes címen: https://mikrotik.com/products

Il fabbricante, Mikrotīkls SIA, dichiara che il tipo di apparecchiatura radio

S53UG+5HaxD2HaxD-TC&EG18-EA è conforme alla direttiva 2014/53/UE. Il testo completo

della dichiarazione di conformità UE è disponibile al seguente indirizzo

Internet: https://mikrotik.com/products

Hér með lýsir Mikrotīkls SIA því yfir að S53UG+5HaxD2HaxD-TC&EG18-EA er í samræmi

við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU.Fullur texti ESB

samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products

Aš, Mikrotīkls SIA, patvirtinu, kad radijo įrenginių tipas S53UG+5HaxD2HaxD-TC&EG18-

EA atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo

interneto adresu: https://mikrotik.com/products

Ar šo Mikrotīkls SIA deklarē, ka radioiekārta S53UG+5HaxD2HaxD-TC&EG18-EA atbilst

Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta

vietnē: https://mikrotik.com/products

B'dan, Mikrotīkls SIA, niddikjara li dan it-tip ta' tagħmir tar-radju S53UG+5HaxD2HaxD-

TC&EG18-EA huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta'

konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li

Andere Handbücher für Chateau LTE18 ax

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MikroTik Netzwerk-Router Handbücher

MikroTik

MikroTik 750/GL Bedienungsanleitung

MikroTik

MikroTik RB4011iGS+RM Bedienungsanleitung

MikroTik

MikroTik RouterBOARD CRS125-24G-1S-2HnD-IN Bedienungsanleitung

MikroTik

MikroTik CCR1009 Series Bedienungsanleitung

MikroTik

MikroTik CCR2116-12G-4S+ Bedienungsanleitung

MikroTik

MikroTik wAP LTE kit Bedienungsanleitung

MikroTik

MikroTik 912UAG-5HPnD-OUT Bedienungsanleitung

MikroTik

MikroTik RBSXTR&R11e-LTE6 Bedienungsanleitung

MikroTik

MikroTik hEX lite Bedienungsanleitung

MikroTik

MikroTik RouterBOARD 750GL Bedienungsanleitung

MikroTik

MikroTik RouterBOARD CCR2004-1G-12S+2XS Bedienungsanleitung

MikroTik

MikroTik RBwAPGR-5HacD2HnD Bedienungsanleitung

MikroTik

MikroTik hEX lite Bedienungsanleitung

MikroTik

MikroTik RouterBOARD 1100 Bedienungsanleitung

MikroTik

MikroTik LHG XL 52 ac Bedienungsanleitung

MikroTik

MikroTik RB941-2nD-TC Bedienungsanleitung

MikroTik

MikroTik RBwAPG-60ad Bedienungsanleitung

MikroTik

MikroTik mANTBox Series Bedienungsanleitung

MikroTik

MikroTik RouterBOARD Metal 5SHPN Bedienungsanleitung

MikroTik

MikroTik RouterBOARD 2011U Series Bedienungsanleitung

MikroTik

MikroTik S53UG+5HaxD2HaxD-TC&EG18-EA Bedienungsanleitung

MikroTik

MikroTik RB2011-2HND Bedienungsanleitung

MikroTik

MikroTik RB1100AHx4 Bedienungsanleitung

MikroTik

MikroTik cAP ax Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung