Milesight Agricultural Kit Bedienungsanleitung
Milesight IoT
Agricultural Kit
Quick Guide
2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not
following the instructions of this operating guide.
The kit must not be remodeled in any way.
EM300/EM500 are not intended to be used as reference sensors, and Milesight will
not should responsibility for any damage which may result from inaccurate readings.
Do not place the all devices close to objects with naked flames.
Do not place all devices where the temperature is below/above the operating range.
Make sure electronic components do not drop out of the enclosure while opening.
When closing the lid, make sure the lid is fitted the right way, so that the enclosure is
properly sealed.
When installing the battery of sensors, please install it accurately, not reversely or
with wrong model.
Make sure both batteries of EM300 are newest when install, or battery life will be
reduced.
The kit must never be subjected to shocks or impacts.
Declaration of Conformity
Milesight LoRaWAN®agricultural kit is in conformity with the essential requirements and
other relevant provisions of the CE, FCC, and RoHS.
© Xiamen Milesight IoT Co., Ltd.
All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or
individual shall copy or reproduce the whole or part of this user guide by any means
without written authorization from Xiamen Milesight IoT Co., Ltd.
For assistance, please contact
Milesight technical support:
Email: iot.support@milesight.com
Tel: 86-592-5085280
Fax: 86-592-5023065
Address: 4/F, No.63-2 Wanghai
Road, 2nd Software Park,
Xiamen, China
Revision History
Date
Doc Version
Description
Jul. 27, 2020
V 1.0
Initial version
Dec. 8, 2020
V 2.0
Replace UC11-T1/UG85 to EM300-TH/UG65
3
Contents
1. Overview.........................................................................................................................................4
2. Preparation....................................................................................................................................4
2.1 Packing List.........................................................................................................................4
2.2 Software Preparation........................................................................................................ 5
3. UG65 Gateway Configuration..................................................................................................... 6
3.1 Fitting Installation.............................................................................................................. 6
3.2 Web GUI Access.................................................................................................................6
3.3 Network Connection.......................................................................................................... 7
3.3.1 Configure the WAN Connection........................................................................... 7
3.3.2 Configure the Cellular Connection.......................................................................8
3.4 LoRaWAN Configuration...................................................................................................9
4. UC1114 Configuration............................................................................................................... 10
5. EM300/EM500 Configuration.................................................................................................. 11
5.1 EM500 Assembly............................................................................................................. 11
5.2 Software Configuration...................................................................................................12
5.2.1 Mobile APP Configuration...................................................................................12
5.2.2 Windows Software Configuration...................................................................... 13
6. Milesight IoT Cloud Configuration...........................................................................................15
7. Hardware Installation................................................................................................................ 16
7.1 UG65 Installation..............................................................................................................16
7.2 UC1114 Installation......................................................................................................... 17
7.3 EM300 Installation...........................................................................................................18
7.4 EM500 Installation...........................................................................................................18
7.4.1 Sensor Installation................................................................................................18
7.4.2 Transceiver Installation....................................................................................... 19
Appendix.......................................................................................................................................... 20
Default Uplink Channels........................................................................................................ 20
Default LoRaWAN Parameters............................................................................................. 21
4
1. Overview
Milesight LoRaWAN®Agricultural Monitoring Node-to-App Starter Kit is designed for
simplifying the process of PoC about LoRaWAN®network establishment and remote
monitoring for the agricultural environment. More information about every product is
available on Milesight IoT website.
2. Preparation
2.1 Packing List
1 × UG65
1 × Ethernet Cable
1 × DC Jack Power
Adapter
1 × Mounting
Bracket
Bracket Mounting
Screws
Wall Mounting Kits
(For UG65)
1 × EM300-TH
Wall Mounting Kits
(For EM300-TH)
5
1 × UC1114
1 × Stubby LoRa
Antenna
1 × 12-Pin Pluggable
Terminal
Wall Mounting
Kits(For UC1114)
1 ×
EM500-SMTC
1 ×
EM500-LGT
Mounting Screws
(For EM500)
Hose Clamps
Note: Please contact your sales representative if the following situations occurs:
Any of above items is missing or damaged;
Other accessories or device models are required for your application.
2.2 Software Preparation
Software
Introduction
Appliance
Download
Milesight
Toolbox
Windows software for
NFC/USB configuration.
UC1114,
EM300/EM500
sensors
https://www.milesigh
t-iot.com/software-do
wnload/
Milesight
Toolbox
(APP ver.)
Mobile APP for NFC
configuration.
EM300/EM500
sensors
Apple Store or Google
Play
Milesight IoT
Cloud
(APP ver.)
Add and manage the
LoRaWAN®nodes on the
Milesight IoT Cloud.
Milesight IoT
Cloud
Apple Store or Google
Play
6
3. UG65 Gateway Configuration
3.1 Fitting Installation
Step 1: Insert the SIM card into the device according to the direction icon on the device.
If you need to take out the SIM card, press into the SIM card and it will pop up
automatically.
Note: UG65 does not support hot plugging (also called hot swapping). please turn off the
power before you insert or take off SIM cards.
Step 2: Install the power cable and Ethernet cable accordingly. After connecting the
Ethernet cable and power cable to corresponding interfaces, you can pass them through
the waterproof silicone and slid into the grooves. Then screw the protective cover back to
the device.
3.2 Web GUI Access
If this is the first time you configure the gateway, please use the default settings below:
ETH IP Address: 192.168.23.150
Wi-Fi IP Address: 192.168.1.1
Wi-Fi AP: Gateway_******
Username: admin
Password: password
Browser:Chrome (recommended)
Here are 2 ways to access the web GUI:
Wireless Mode: Enable Wireless Network Connection on your computer and search
for access point “Gateway_******” to connect it. After connected, type 192.168.1.1 to
7
your Internet browser to log in the web GUI.
Wired Mode: Connect Ethernet port of UG6x to your computer and configure the IP
address of computer manually, then type 192.168.23.150 to your browser to log in
the web GUI. Here are steps of configuring computer IP address manually based on
Windows 10 system.
Step 1: Go to “Control Panel” →“Network and Internet” →“Network and Sharing Center”,
then click “Ethernet” (May have different names).
Step 2: Go to “Properties” →“Internet Protocol Version 4(TCP/IPv4) ”and select “Use the
following IP address”, then assign a static IP manually within the same subnet of UG65.
3.3 Network Connection
This section explains how to connect the gateway to network via WAN connection or
cellular.
3.3.1 Configure the WAN Connection
Step 1: Go to “Network”→“Interface” →“Port” page to select the connection type and
configure Ethernet port information.
Step 2: Connect Ethernet port of gateway to devices like router or modem.
8
3.3.2 Configure the Cellular Connection
Step 1: Go to “Network” →“Interface” →“Cellular” →“Cellular Setting” page to enable
cellular settings and fill in SIM card information like APN or PIN code.
9
Step 2: Go to “Status” →“Cellular” page to view the status of the cellular connection. If it
shows “Connected”, it means the SIM has dialed up successfully. On the other hand, you
can check the status of LTE indicator. If it keeps on light statically, it means SIM has
dialed up successfully.
3.4 LoRaWAN Configuration
Step 1: Go to “Packet Forwarder” →“General” page to enable the “Milesight” type server.
Step 2: Go to “Network Server” →“General” page to enable the network server and
Milesight IoT Cloud mode.
10
4. UC1114 Configuration
Step 1: Rotate the antenna into the antenna connector accordingly. The external LoRa
antenna should be installed vertically always on a site with a good signal.
Step 2: Connect the terminal devices to digital input or reply output of the UC1114.
Step 3: Power on the UC1114 via terminal block(VIN, GND).
Step 4: Connect UC1114 to computer via micro USB port and open the Toolbox to
configure UC1114 if necessary.
Inhaltsverzeichnis
Beliebte Mikrofon Handbücher anderer Marken
IK Multimedia
IK Multimedia iRig Stream MIC PRO Bedienungsanleitung
DAPAudio
DAPAudio RM-101 Bedienungsanleitung
AKG
AKG CHM 21 Bedienungsanleitung
Sennheiser
Sennheiser evolution wireless series EM 100 Bedienungsanleitung
Sony
Sony C-48 Bedienungsanleitung
GIGAMEDIA
GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung
