Mindeo MD6850 Bedienungsanleitung

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6850_QG_EN_V1.2.

MD6850 Image Barcode Scanner Quick Guide

Note

Parts of the scanner

①LED

②Beeper

③Exit window

④Trigger

⑤Release-hole of the cable

⑥Cable interface port

Installing the cable

1. Switch off the host;

2. Refer to the below pictures, connect the host with the scanner based on different cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

RS232 cable

USB cable

Removing the cable

1. Find the release-hole;

2. Insert a thin wire into the hole and pull out the cable gently.

Return default parameters and version information

Default value initialization

Firmware version list

Note: If the host cannot receive data normally because the input speed of the scanner is

too fast, please scan the barcode below:

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate

Single-scan setting

Example: To set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: To set Flow control to be XON/XOFF.



A standard packing includes a scanner, a USB cable and a CD (or a user manual).



Accessories include a RS232 cable, a 5V adaptor.



Use a piece of dry and soft cloth when cleaning the scanner is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6850_QG_EN_V1.2.

Reading techniques

1. Press and hold the trigger, the scanner projects a green LED square which allows

positioning the barcode within its field of view, and turns on the white LED for illumination.

2. When reading a barcode, the green LED square will be smaller when the scanner is closer

to the barcode and larger when it is farther from the barcode. Please hold the scanner at

an appropriate distance from the barcode, and center the green LED square on the

barcode.

3. On a successful barcode reading, the scanner will beep once, and the green LED square

and white LED will be turned off. Then the scanner transmits barcode message to the host.

Assembling the stand

Note: The stand is an accessory.

1. See the figure above, tighten the screws.

2. Bend the neck to the desired position for scanning.

3. Screw mounting: Screw one #10 wood screw into each screw-mount-hole until the base of

the stand is secured.

4. Tape mounting: ①Peel the paper liner off one side of each piece of tape and place the

sticky surface over each of the three rectangular tape holders. ②Peel the paper liner off

the exposed sides of each piece of tape and press the stand on a flat surface until it is

secure.

Vibration indication

Disable

Enable*

Note: The factory default settings are indicated with asterisks (*).

Beeper indication

Disable

Enable*

Volume of beeper

Low

Middle

High*

Scanning mode

Good-read off

Momentary*

Auto-detection

Illumination mode of Auto-detection

Always off

Enable illumination in low

light conditions

Always on*

Andere Mindeo Barcode-Lesegerät Handbücher

Mindeo

Mindeo MP8600 Bedienungsanleitung

Mindeo

Mindeo ES168 Bedienungsanleitung

Mindeo

Mindeo MD22 Series Bedienungsanleitung

Mindeo

Mindeo MD29 Series Bedienungsanleitung

Mindeo

Mindeo MS3590 Bedienungsanleitung

Mindeo

Mindeo MD22 Series Bedienungsanleitung

Mindeo

Mindeo MP80 Series Bedienungsanleitung

Mindeo

Mindeo MD62 Series Bedienungsanleitung

Mindeo

Mindeo MD60 Series Bedienungsanleitung

Mindeo

Mindeo FS580 Bedienungsanleitung

Mindeo

Mindeo MP83xx Bedienungsanleitung

Mindeo

Mindeo MP82 Series Bedienungsanleitung

Mindeo

Mindeo CS3290 Bedienungsanleitung

Mindeo

Mindeo MD6600 Bedienungsanleitung

Mindeo

Mindeo MP168 Bedienungsanleitung

Mindeo

Mindeo MD6100S Bedienungsanleitung

Mindeo

Mindeo MP83 Series Bedienungsanleitung

Mindeo

Mindeo CS-I Series Bedienungsanleitung

Mindeo

Mindeo MS3390 Bedienungsanleitung

Mindeo

Mindeo MD61 Series Bedienungsanleitung

Mindeo

Mindeo MD52 Series Bedienungsanleitung

Mindeo

Mindeo MD6000 Bedienungsanleitung

Mindeo

Mindeo CR40 Series Bedienungsanleitung

Mindeo

Mindeo FS380 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung