Mingda MD-600D Bedienungsanleitung
User Manual
[MD-600D & MD-1000D 3D Printer]
Shenzhen MINGDA Technology Co.,Ltd
V1.1
*Please read this guide carefully before using this printer
Thank you for choosing MINGDA Technology's products!
For the best experience, please read this user manual carefully and follow the instructions to operate the printer.
If you encounter any issues with the printer, please contact us using the contact information provided at the end
of this user manual. Our team is always ready to provide you with high-quality service.
To enhance your usage of our product, you can also learn how to use the printer through the following means:
1. User Manual: Relevant instructions and videos can be found on the included USB drive.
2. You can also visit our official website (www.3dmingda.com) for information on software, hardware, contact
details, device instructions, device specifications, and warranty information, among other things.
1. Please do not place the printer in environments with significant vibrations or instability, as machine
shaking can affect the print quality.
2. Avoid touching the nozzle and heated bed while the printer is in operation to prevent potential burns from
high temperatures, resulting in personal injury.
3. Refrain from moving the device during the printing process to prevent accidents and injuries.
4. Do not dismantle the equipment or alter circuit settings without authorization.
5. Avoid using the device in high-temperature or humid environments to prevent compromising device
performance or creating safety hazards.
6. In case of an emergency, immediately cease using the device and power it off.
Cautionary Notes
Contents
1 Overview …………………………………………………………………………………………………………………..........
2 Device Introduction ……………………………………………………………………………….............................
Device Parameters ……………………………………………………………………………………………...…..........................................
Packing List ……………………………………………………………………………………………………………...........................................
Precautions for the Use of High Temperature Filament ……......…….......…….......……............….......……..................
3 Operational Steps ……………………………………………………………………………………...........................
Unboxing Inspection …………………………………………………………………………………………….....….....................................
Device Installation ……………………………………………………………………………………………..................................................
1. Install the indicator light ………………………………………………………………………………............................................
2. Install the antenna ……………………………………………………………………………….....……..........................................
3. Power on ………………………………………………………………………………..............……...............................................
Startup Configuration ………………………………………………………………………………………..................................................
Select Language and Time Zone …………………………………………………………………................................................
Auto Bed Leveling ……………………………………………………………………………….....……............................................
Wi-Fi ……………………………………………………………………..............……...................................................................
Introduction to machine operation page ………………….........…………………………………………………………….………….....…
Extruder Offset Calibration.…….........…………………………………….…………......….………......….………......….…...................
XY Axis Offset Calibration ………………………………………………………………….........................................................
Z Axis Offset Calibration …………………………………………………………………….....…….............................................
Install the filament.…….........…………………………………….…………......…........………......…........………......…........……….....
Slicing Software Installation and Usage ………………………….……....….......................................................................
Installation …………………………………………………………………................................................................................
Configuration ……………………………………………………………………………….....……..................................................
Usage ……………………………………………………………………..............…….................................................................
Printing ........….........…………………………………….…………......…....................................................................................
Local Printing …………………………………………………………………............................................................................
LAN Printing ……………………………………………………………………………….....…….....................................................
Print Mode ………………………………….……………………….…………......…...........................................................................
Print Two Colors ……………………………………………………………………..............…….................................................
Printing Support ……………………………………………………………………..............…….................................................
Printing ...…...…...…...…...…...…...…............…...…...…...…......…...…...…...…..….…..….…..….…..….…....…....…...........…..
4 Maintenance and Care …...…...…...……...……...……...…...…...…...…..……...…...…....…...…...............
5 Common Issues and Solution …..…...…...…...…...…...…...……...…...…...…...…...…....……...…...…...
6. After sales service and support ..…..........……...............……..........……..............................…...
2
2
2
3
4
5
5
5
5
5
6
7
7
7
7
9
13
13
14
15
18
18
18
19
20
20
20
23
23
25
26
27
28
29
1. Overview
This manual provides instructions on the usage of the 3D printer, covering aspects such as an overall introduction
to the device, operational procedures, maintenance, and care. The aim of this manual is to assist you in correctly using
and maintaining the 3D printer, ensuring device performance and safety, extending the lifespan of the equipment,
and enhancing print quality. We hope that you follow the requirements and recommendations outlined in this manual
during usage, and maintain attention to and care for the equipment. Thank you for choosing our product, and we wish
you a pleasant experience!
2. Device Introduction
Device Parameters
Basic Parameters
Product Model
MD-600D | MD-1000D
Machine Dimensions
1300*965*1255mm | 1680*1365*1665 mm
Max. Build Dimensions
600*600*600mm | 1000*1000*1000mm
Print Technology
Fused Deposition Modeling (FDM)
Rated Voltage
100-240V, 50/60Hz
Rated Power
2000W | 2700W
Ambient temperature
10℃-30℃ / 50°F-86°F
Extruder Type
Dual Extruders
Max. Nozzle Temperature
350℃
Max. Bed Temperature
110℃
Screen
10inch touch screen
Printing Method
USB Flash Disk / LAN Printing
Connection
USB Flash Disk / WIFI / Ethernet
Power Loss Recovery
Yes
Filament Detection
Yes
Fast Auto leveling
Yes
Camera
Yes
Fast Calibrate Offset
Yes
Supported Filament
Common filament: PLA, PETG;
Engineering filament: PA-CF/GF, PET-CF/GF, HtPA-CF/GF,
PA-GF25/CF25;
Support filament: S-Mulit, S-HtPA, PVA, etc
2
Packing List
Tool List
Note: The picture is for reference only. When the real thing is inconsistent with
the picture, the actual object shall prevail.
U-disk Nozzle*2 Diagonal pliers 7mm Sleeve
Allen wrench Antenna
Indicator light & screw
Below we will take MD-1000D as an example to introduce the function and use of the printer:
If you choose high temperature
filament, we will provide a drying box.
3
Note: Please put the high-temperature filaments in a dry box for printing, otherwise humidity
will affect the print quality.
Precautions for the Use of High Temperature Filament
If the high-temperature filament is not used up, put it in an aluminum foil bag in time. If
the filament is wet or the surface of the print has obvious drawing, it means that the
filament is damp, and it needs to be dried in an industrial oven before use.
4
Unpack and inspect the device for any damage. If there is any abnormality, please
contact the manufacturer or dealer.
Device Installation
Unboxing Inspection
2. Install the antenna.
3. Operational Steps
5
1. Install the indicator light.
2. Power on
In a good ventilation and dry environment
Insert a power socket Press the power button to turn on the printer
Please ensure that the print platform is clear before connecting the power and
check if the device is connected properly.
6
3. Power off
When you turn off the printer, please don't press the power button
directly! Check the Page 12, click "General-System-Shutdown-Printer"
to turn off the printer
Click the "System" button.
Click the "General" button.
Click the "Shutdown" button.
Startup Configuration
1. Select Language and Time Zone
Start by selecting your continent on the left,
then click the right arrow to choose your
specific region. [Time zone settings will take
effect after connecting to Wi-Fi and restarting
the system.]
Click the right arrow to choose
the language, and click the upper
right arrow to proceed to the next
step.
3
1
21
2
(For the first startup, it will enter the configuration wizard.)
2. Auto Bed Leveling
Click the "Save" button to store the bed
leveling data and automatically restart the
printer.
Click the "Calibrate" button to initiate the
quick auto bed leveling process, which will
take approximately 3 minutes. Please be
patient.
3. Wi-Fi
Enter the network password and then click
Save.
Click the right arrow button, select the network
you want to connect to. The first connection
may take some time, please be patient. If the
network is not displayed for an extended period,
click the refresh button at the top.
7
Upon successful connection, click the
checkmark in the upper right corner to enter
the main interface of the machine. If you do
not need to connect to the network, you can
also click the checkmark to skip this step.
Once the connection is successful, click
the Close button.
8
After completing the above steps, Home all Axis
Click the "Move" button Click the "Home" button
Z Calibrate
Click "Setting-Z Calibrate"
Click "Start" , wait Z axis calibrating
and click "Accept" and comfirm
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Mingda 3D-Drucker Handbücher
Mingda
Mingda MD-600 Pro Bedienungsanleitung
Mingda
Mingda Magician X2 Bedienungsanleitung
Mingda
Mingda Magician Pro Bedienungsanleitung
Mingda
Mingda Magician X Bedienungsanleitung
Mingda
Mingda MD-400D Bedienungsanleitung
Mingda
Mingda Magician Pro Bedienungsanleitung
Mingda
Mingda MD-D01 Bedienungsanleitung
Mingda
Mingda Magician X Montageanleitung
Mingda
Mingda Magician X2 Bedienungsanleitung
Mingda
Mingda Glitar 4 Bedienungsanleitung
