Minka Group minkaAire CONCEPT III Leitfaden
INSTRUCTION MANUAL WARRANTY CERTIFICATE
CONCEPT III
BY
©2020 Minka Lighting Inc. Manual design and all elements of manual design are protected by United States Federal and/or State Law including
Patents, Trademark, and/or Copyright Laws.
The Minka-Aire® warranty is for one (1) year from the date of purchase from an authorized Minka-Aire® dealer.
This warranty is only valid to the original purchaser or user against all defects in material and workmanship (light bulbs
excluded) for one (1) full year. Additionally, Minka-Aire® warrants the motor only for the lifetime of the Minka Aire ceiling
fan (excluding wall controls and electrical components), to the original purchaser or user.
* The warranty is voided with the use of any non- Minka-Aire®electrical devices, E.g., wall controls or electrical dimmer switches, etc…
* The warranty is void once the original purchaser or user ceases to own the fan or the fan is moved from its original point of installation.
* The warranty is void with the use of any hanger bracket (non-Minka Aire or non-fan specific) other than the hanger bracket supplied & installed
with this specific fan.
Date Purchased Store Purchased Model Number Serial Number
F467L
Warranty Service Information
To obtain warranty service during the warranty period, the purchaser should return the fan with the sales receipt to the original place of
purchase. The authorized Minka-Aire® dealer, at its sole discretion, will either repair or replace the fan after verifying the legitimacy of the warranty
claim. Replacement is subject to availability of the same model. If the model is unavailable it will be replaced by one of equal value. This is a
limited warranty; the original purchaser or user is responsible for the cost of removal and reinstallation of repaired or replacement product.
To obtain the name of the Minka-Aire® authorized dealer nearest you call the Minka-Aire® customer care department at 1-800-307-3267, or
contact Minka-Aire® through www.minkagroup.net and select FAQ to answer any questions or if you require additional assistance submit the
question form found there.
CONTENTS
INSTALLING THE LED LIGHT KIT
......................................................
INSTALLING THE GLASS SHADE
......................................................
OPERATING THE REMOTE CONTROL........
....................................
ENJOY YOUR SMART CEILING FAN
...............................................
CARE OF YOUR FAN..............................................................................
TROUBLESHOOTING............................................................................
SPECIFICATIONS....................................................................................
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SAFETY RULES....................................................................................
PACKAGE CONTENTS.....................................................................
INSTALLING THE MOUNTING BRACKET..............................
ELECTRICAL CONNECTIONS.......................................................
FINISHING THE INSTALLATION................................................
BLADE INSTALLATION...................................................................
INSTALLING THE MOUNTING PLATE
.....................................
1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267
SAFETY RULES
1
1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
2. Be cautious! Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.
3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a
do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.
4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the
floor and 18 inches from the tip of the blades to the wall.
5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support". Secure the
box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 50 pounds) Do
not use a plastic box.
6. CAUTION:
CAUTION:
To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided with the fan.
7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).
8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.
9. Do not insert anything into the fan blades while the fan is operating.
10. Turn the fan off and wait for the blades to stop completely before performing any maintenance or cleaning. SUITABLE FOR USE IN
WET LOCATIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN CONJUCTION WITH THE LOCK WASHERS PROVIDED WITH
THE FAN. MOST OUTLET BOXES COMMONLY USED FOR FAN SUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE
REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING THE FAN. DO NOT
INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, THIS FAN CAN ONLY USE AL158-RM351HF70001 SOLID-STATE SPEED CONTROL WITH
RC1000 REMOTE CONTROL ONLY
NOTE:
NOTE:
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be
supplied by the person (s) installing, caring for and operating the unit.
NOTE:
NOTE:
READ AND SAVE ALL INSTRUCTIONS!
2
1. Fan Blades (3)
2. Mounting bracket
3. Decorative ring
4. Fan motor/housing assembly
5. Mounting plate
6. 30W LED light kit
7. Glass shade
8. Receiver
9. Remote control with holder and
2 mounting screws
10. 1.5V AAA battery (2)
10. Balancing kit
A. Mounting hardware:
#10 x 1.5" Wood screws (2 PCs.)
#8 x 3/4" Machine screws (2PCs.)
Lock washers (2 PCs.)
4mm Star washers (2 PCs.)
Washers (2 PCs.)
Wire nuts (3 PCs. ),
B. Blade removal tool
PACKAGE CONTENTS
Unpack your fan and check the contents. You should have the following items:
B
A
1
2
3
4
5
6
8
10
9
11
7
1
2
34
5
6
3
Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.
INSTALLING THE MOUNTING BRACKET
WARNING:
WARNING:
All of the parts, hardware and components such as the hanger bracket and hanger ball have
been provided for your safety and the proper installation of your new ceiling fan. The use of other parts,
hardware or components not supplied by Minka Aire
®
with the fan will void the Minka Aire
®
Warranty.
REMEMBER To turn off the power. Follow the steps below to hang your fan properly.
Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided. Make sure
the bracket is tight and secured. (Fig. 1)
Step 2. Remove the double-sided tape on the mounting bracket and stick the receiver on the mounting
bracket. (Fig. 1)
Step 3. Place decorative ring onto the fan motor/housing assembly. Lift fan into position by hanging the
motor assembly onto the hook from the ceiling mounting bracket allowing it to hang freely. (Fig. 1)
Fig. 1
DECORATIVE
RING
MOUNTING
BRACKET
RECEIVER
4
ELECTRICAL CONNECTIONS
WARNING:
WARNING:
To avoid possible electrical shock be sure electricity is
turned off at the main fuse or breaker box before wiring.
NOTE:
NOTE:
The Aire Control
®
System is equipped with a learning frequency
function which has 1024 code combinations to prevent potential
interference from other remote units. The frequency on your Transmitter
units have been preset at the factory. (Fig. 2) No frequency change is
necessary, should you desire to install another fan within the same
home or area with a seperate frequency code please see the "frequency
interference" troubleshooting section of this instruction manual to learn
how to change the frequency.
NOTE:
NOTE:
fan must be installed from a maximum distance of 40 feet from
the transmitting unit for proper signal transmission between the
transmitting unit and the fan's receiving unit.
Step 1. Motor to receiver electrical connections: Be sure to snap together
the 2-PIN, 4-PIN connectors and sansor wire connector from the receiver
and fan. (Fig. 3 & 4)
Step 2. Receiver to house supply wires electrical connections: connect
the white wire (neutral) from the outlet box to the white wire marked
"AC in N" from the receiver. Connect the black wire (hot) from the outlet
box to the black wire marked "AC in L" from the receiver. Secure all wire
connections with the plastic wire nuts provided. (Fig. 3 & 4)
Step 3. If your outlet box has a ground wire (green or bare copper)
connect this wire to the mounting bracket and receiver ground wires. If
your outlet box does not have a ground wire, then connect the mounting
bracket and receiver ground wires together. Secure wire connection with
the plastic wire nut provided. (Fig. 4)
After all splices are made, check to make sure there are no loose strands.
As an additional precaution we suggest to secure the plastic wire
connectors to the wires with electrical tape.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Minka Group Lüfter Handbücher
Minka Group
Minka Group Minka-Aire Espace Bedienungsanleitung
Minka Group
Minka Group Aire Roto F524 Leitfaden
Minka Group
Minka Group Aire Waywood Bedienungsanleitung
Minka Group
Minka Group minkaAire Contractor Series Bedienungsanleitung
Minka Group
Minka Group Minka-Aire Java LED F753L-WHF Bedienungsanleitung
Minka Group
Minka Group minkaAire ORB F623L Bedienungsanleitung
Minka Group
Minka Group Aire WELKIN Leitfaden
Minka Group
Minka Group minkaAire CONCEPT I Leitfaden
Minka Group
Minka Group minkaAire CONCEPT IV Leitfaden
Minka Group
Minka Group minkaAire Contractor WATT F551 Bedienungsanleitung
Minka Group
Minka Group MinkaAire Ultra-Max F588-SP Bedienungsanleitung
Minka Group
Minka Group minkaAire CRISTAFANO F900L-BCW Leitfaden
Minka Group
Minka Group minkaAire Rainman F582L-SI Leitfaden
Minka Group
Minka Group MinkaAire Mesa F566 Bedienungsanleitung
Minka Group
Minka Group Minka-Aire Kewl F833 Bedienungsanleitung
Minka Group
Minka Group minkaAire SKYHAWK Leitfaden
Minka Group
Minka Group Minka-Aire Symbio Bedienungsanleitung
Minka Group
Minka Group Minka-Aire Java LED F753L Bedienungsanleitung
Minka Group
Minka Group MinkaAire Java F753 Series Leitfaden
Minka Group
Minka Group minkaAire Wave F843 Bedienungsanleitung
