Mitsubishi Electric M700V Series Bedienungsanleitung

III Functional Specifications

III - 1

Control Axes

III Functional Specifications

MITSUBISHI CNC

III - 2

1.1 Control Axes

The NC axis, spindle, PLC axis and auxiliary axis are generically called the control axis.

The NC axis is an axis that can be manually operated, or automatically operated with the machining

program. X, Y, Z, U, V, W, A, B and C axis can be used.

The PLC axis is an axis that can be controlled from the PLC ladder.

1.1.1 Number of Basic Control Axes (NC Axes)

1.1.2 Max. Number of Axes (NC Axes + Spindles + PLC Axes)

A number of axes that are within the maximum number of axes, and that does not exceed the

maximum number given for the NC axis, spindle and PLC axis can be used.

Connection specifications of NC axis, PLC axis and spindle

NC axes, PLC axes and spindles are connected to the optical servo channel (OPT).

Refer to the Connection manual for details.

1.1.2.1 Max. Number of NC Axes (In Total for All the Part Systems)

1.1.2.2 Max. Number of Spindles

Includes analog spindles.

1.1.2.3 Max. Number of PLC Axes

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○3 ○3 ○3 ○3 ○3 ○3

L system ○2 ○2 ○2 ○2 ○2 ○2

M720VW M730VW M750VW M720VS M730VS M750VS

M system 12 16 16 12 16 16

Lsystem121616121616

M720VW M730VW M750VW M720VS M730VS M750VS

M system 8 16 16 8 16 16

Lsystem121616121616

M720VW M730VW M750VW M720VS M730VS M750VS

M system 4 4 4 4 4 4

Lsystem466466

M720VW M730VW M750VW M720VS M730VS M750VS

M system 6 6 6 6 6 6

Lsystem666666

M700V Series Specifications Manual

1 Control Axes

III - 3

1.1.3 Max. Number of Auxiliary Axes (MR-J2-CT)

Auxiliary axis: This can be connected to the channel (SV2) for J2-CT.

1.1.4 Max. Number of PLC Indexing Axes

PLC axis indexing function: This function is used to move the PLC axis to the positioning destination or an

arbitrary coordinate position.

1.1.5 Number of Simultaneous Contouring Control Axes

Simultaneous control of all axes is possible as a principle in the same part system.

However, for actual use, the machine tool builder specification will apply.

1.1.6 Max. Number of NC Axes in a Part System

Listed are the maximum number of axes which can be controlled in a part system. Follow the specifications

by each machine tool builder for actual use.

M720VW M730VW M750VW M720VS M730VS M750VS

M system 4 6 6 0 0 0

L system 4 6 6 0 0 0

M720VW M730VW M750VW M720VS M730VS M750VS

M system 4 6 6 4 6 6

L system 4 6 6 4 6 6

M720VW M730VW M750VW M720VS M730VS M750VS

M system 4 4 8 4 4 8

L system 4 4 8 4 4 8

M720VW M730VW M750VW M720VS M730VS M750VS

M system 6 8 8 6 8 8

L system 6 8 8 6 8 8

III Functional Specifications

MITSUBISHI CNC

III - 4

1.2 Control Part System

1.2.1 Standard Number of Part Systems

1.2.2 Max. Number of Part Systems

For actual use, the machine tool builder specification will apply.

M720VW M730VW M750VW M720VS M730VS M750VS

M system 1 1 1 1 1 1

Lsystem111111

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○2○2○2○2○2○2

L system ○2○4○4○2○4○4

M700V Series Specifications Manual

1 Control Axes

III - 5

1.3 Control Axes and Operation Modes

1.3.1 Tape (RS-232C Input) Mode

In this mode, operation is performed using the machining program data from the RS-232C interface built in

the CNC unit. A paper tape reader must be provided if machining programs on paper tape are to be run.

1.3.2 Memory Mode

The machining programs stored in the memory of the CNC unit are run.

1.3.3 MDI Mode

The MDI data stored in the memory of the CNC unit is executed. Once executed, the MDI data is set to the

"setting incomplete" status, and the data will not be executed unless the "setting completed" status is

established by screen operations.

1.3.4 High-Speed Program Server Mode

1.3.4.1 CF Card in Control Unit

The machining program stored in CF card can be operated by installing a CF card in the control unit CF

(compact flash) card interface.

Machining programs can be copied to CF card with the front IC card or Ethernet on the input/output screen.

When a machining program stored in CF card is searched while "DS" is selected for device during operation

search, the machining program in CF card can be operated as a main program. (The operation mode is

"memory mode".)

Also, when "M198 Pp;" is commanded in the main program, the machining program in CF card can be called

and operated as a sub program.

Macros such as WHILE, IF and GOTO can be used during high-speed program server mode, as well. Also,

calling the sub program and macro program stored in memory or CF card is possible during high-speed

program server mode operation.

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○○○○○○

L system ○○○○○○

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○○○○○○

L system ○○○○○○

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○○○○○○

L system ○○○○○○

M720VW M730VW M750VW M720VS M730VS M750VS

M system △△△―――

L system △△△―――

III Functional Specifications

MITSUBISHI CNC

III - 6

1.3.5 Front IC Card Mode

The machining program stored in PCMCIA card can be operated by installing a PCMCIA card on the front of

control unit.

When a machining program stored in PCMCIA card is searched while "Memory Card" is selected for device

during operation search, the machining program in PCMCIA card can be operated as a main program. (The

operation mode is "memory mode".)

Also, when "M98 Pp, Dd;" ("d" for designating a unit) is commanded in the main program, the machining

program in PCMCIA card can be called and operated as a sub program.

Macros such as WHILE, IF and GOTO can be used during IC card operation, as well. Also, calling the sub

program and macro program stored in memory or PCMCIA card is possible during IC card operation.

1.3.6 Hard Disk Mode

The machining program stored in the hard disk can be operated when using a high-resolution type display (a

display with a hard disk mounted).

When a machining program stored in hard disk is searched while "HD" is selected for device during

operation search, the machining program in the hard disk can be operated as a main program. (The

operation mode is "memory mode".)

Also, when "M98 Pp ,Dd;" ("d" for designating a unit) is commanded in the main program, the machining

program in the hard disk can be called and operated as a sub program.

Macros such as WHILE, IF and GOTO can be used during hard disk operation, as well. Also, calling the sub

program and macro program stored in memory or the hard disk is possible during hard disk operation.

M720VW M730VW M750VW M720VS M730VS M750VS

M system △△△△△△

L system △△△△△△

M720VW M730VW M750VW M720VS M730VS M750VS

M system △△△―――

L system △△△―――

III - 7

Input Command

III Functional Specifications

MITSUBISHI CNC

III - 8

2.1 Data Increment

2.1.1 Least Command Increment

The data increment handled in the controller includes the input setting increment and command increment.

Each type is set with parameters.

(1) The input setting increment indicates the increment handled in the internal processing of the

controller. The counter and tool compensation data, etc., input from the screen is handled with this

increment. This increment is applied per part system (1st to 4th part system, PLC axis).

(Note) The inch and metric systems cannot be used together.

(2) The command increment indicates the command increment of the movement command in the

machining program. This can be set per axis.

(Note) The inch and metric systems cannot be used together.

2.1.1.1 Least Command Increment 1 μm (Input Setting Increment 1μm)

It is possible to command 0.001mm for the linear axis and 0.001° for the rotation axis.

2.1.1.2 Least Command Increment 0.1 μm (Input Setting Increment 0.1μm)

It is possible to command 0.0001mm for the linear axis and 0.0001° for the rotation axis.

Input setting

increment

(parameter)

Metric unit system Inch unit system

Linear axis Rotary axis Linear axis Rotary axis

(Unit = mm) (Unit = °)(Unit = inch) (Unit = °)

1μm (B) 0.001 0.001 0.0001 0.001

0.1μm (C) 0.0001 0.0001 0.00001 0.0001

10nm (D) 0.00001 0.00001 0.000001 0.00001

1nm (E) 0.000001 0.000001 0.0000001 0.000001

Command

increment

(parameter)

Metric unit system Inch unit system

Linear axis Rotary axis Linear axis Rotary axis

(Unit = mm) (Unit = °)(Unit = inch) (Unit = °)

0 Accordance with #1003 iunit.

1 0.0001 0.0001 0.00001 0.0001

10 0.001 0.001 0.0001 0.001

100 0.01 0.01 0.001 0.01

1000 0.1 0.1 0.01 0.1

10000 1.0 1.0 0.1 1.0

M720VW M730VW M750VW M720VS M730VS M750VS

M system ○○○○○○

L system ○○○○○○

M720VW M730VW M750VW M720VS M730VS M750VS

M system △△△△△△

L system △△△△△△

Andere Handbücher für M700V Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric Steuerungssystem Handbücher

Mitsubishi Electric

Mitsubishi Electric CB10 ME Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric M80 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric LMAP02-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AE-200A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AG-150A-A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric C80 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELDAS C6 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAC-YT32PTA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAC-WHS01WF-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAR-CT01MAA-SB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric TW-50A Kurzanleitung

Mitsubishi Electric

Mitsubishi Electric GB-24A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric C70 Benutzerhandbuch

Mitsubishi Electric

Mitsubishi Electric par-u02meda Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AE-200A/AE-50A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric GB-50ADA-J Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PAR-40MAAU Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MCC-50A Kurzanleitung

Mitsubishi Electric

Mitsubishi Electric MELDAS 60 Series Betriebsanleitung

Mitsubishi Electric

Mitsubishi Electric PAR-33MAA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 700 Series Installationsanleitung

Mitsubishi Electric

Mitsubishi Electric AG-150A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Trane TE-50A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J2S Series Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung