Mitsubishi Electric BC11 Bedienungsanleitung

Mitsubishi Electric Power Products, Inc.

BC11 Battery Cabinet

Installation, Operation, & Maintenance Manual

Built for Mitsubishi Electric Power Products, Inc. by

8/27/2013 2 755-00044 R02

8/27/2013 3 755-00044 R02

This manual contains proprietary and confidential information of C&C Power, Inc., and has been

prepared for the use of Mitsubishi Electric Power Products, Inc., for use in conjunction with

equipment provided by C&C Power, Inc. Unauthorized reproduction, in whole or in part, without

written permission of C&C Power, Inc., is prohibited.

C&C Power, Inc.

395 Mission Street

Carol Stream, IL 60188

www.ccpower.com

Technical Support:

Phone: (630) 617-9022

Email: suppor[email protected]

8/27/2013 4 755-00044 R02

8/27/2013 5 755-00044 R02

TABLE OF CONTENTS

1. Important Information About This Manual................................................................................. 6

1.1 Manual Symbols.................................................................................................................... 6

2. Introduction:................................................................................................................................ 7

3. Safety Precautions....................................................................................................................... 8

4. Inspection Upon Receipt of Goods............................................................................................ 10

4.1 General ................................................................................................................................ 10

4.2 Visible Damage................................................................................................................... 10

4.3 Concealed Damage.............................................................................................................. 10

4.4 Return of Damaged Goods.................................................................................................. 10

5. System Overview ...................................................................................................................... 11

6. System Specifications................................................................................................................ 12

6.1 Batteries............................................................................................................................... 12

6.2 System Grounding............................................................................................................... 12

6.3 DC Output ........................................................................................................................... 12

6.4 General Specifications......................................................................................................... 12

7. Installation................................................................................................................................. 14

7.1 Preparation........................................................................................................................... 14

7.1.1 Equipment Inspection................................................................................................... 14

7.1.2 Necessary Equipment and Tools .................................................................................. 14

7.1.3 Installation Safety Precautions ..................................................................................... 14

7.2 Installation Steps ................................................................................................................. 15

7.2.1 Equipment Location ..................................................................................................... 15

7.2.2 Equipment Mounting.................................................................................................... 15

7.2.3 Equipment Grounding.................................................................................................. 15

7.2.4 DC Connections............................................................................................................ 16

7.2.5 System Operation ......................................................................................................... 16

8. System Maintenance.................................................................................................................. 17

8.1 Battery Replacement ........................................................................................................... 17

9. Reference Materials................................................................................................................... 19

10. Warranty.................................................................................................................................. 21

BC11 BATTERY CABINET

8/27/2013 6 755-00044 R02

1.IMPORTANT INFORMATION ABOUT THIS MANUAL

SAVE THESE INSTRUCTIONS! This manual contains important information that is needed

during the installation and maintenance of the system.

1.1 MANUAL SYMBOLS

Warning:

Indicates information provided to protect the user against personal injury and/or

safety hazards.

Caution:

Indicates information provided to protect the user against safety hazards and/or

possible equipment damage.

Important:

Indicates information provided as an installation or operating instruction or tip as

well as general important installation and system information.

BC11 BATTERY CABINET

8/27/2013 7 755-00044 R02

2. INTRODUCTION:

The C&C Power family would like to thank you for choosing a C&C Power Inc. product for your

equipment needs. We know there are a lot of choices in the industry and we appreciate the

opportunity to supply each of our customers with the highest quality power products

manufactured in the United States today. All of C&C Power’s solutions are factory tested to some

of the highest standards is the industry. Every battery cabinet system is Hi Pot tested to UL

standards at our facility prior to shipment.

Sales support for future equipment needs or upgrades is provided by our regional sales staff and

qualified representatives. All technical questions and service issues should be directed to our

main office by dialing the number listed below. This is a 24-hour, 7-day service number. After

normal working hours, please leave a detailed message with your phone number on the voice mail

system and a qualified service representative will contact you as quickly as possible.

C&C Power, Inc.

395 Mission Street

Carol Stream, IL 60188

www.ccpower.com

Technical Support:

Phone: (630) 617-9022

Email: suppor[email protected]

BC11 BATTERY CABINET

8/27/2013 8 755-00044 R02

3. SAFETY PRECAUTIONS

Before installing or maintaining this system, it is extremely important to read this

manual and be sure that all system drawings and schematics are reviewed and

clearly understood. If there are any questions concerning this manual or any of the

installation or maintenance procedures and/or requirements please contact a C&C

Power representative before proceeding.

When installing this power system, follow all applicable federal, state and local

regulations as well as industry guidelines to insure proper system installation.

Only qualified electricians or DC power technicians should attempt to install or

service this equipment.

System installation and maintenance should always be performed with heavily

insulated tools. It is also recommended to wear rubber gloves, boots, and use

insulating mats to stand on when working on this equipment.

Always wear eye protection when installing or maintaining batteries and/or power

equipment.

Battery cabinet systems are extremely heavy. Use a minimum of two people when

unloading and setting equipment in place.

Do not smoke or present open flames near any battery system.

For the safety of others, never leave an open cabinet or panel unattended.

To reduce the risk of fire, replace fuses with the same type and rating of fuses

supplied with the system.

DC Power and Batteries can be very dangerous and have extremely high short

circuit current. Electrical shock, severe burns, fire or death can result from a system

short.

BC11 BATTERY CABINET

8/27/2013 9 755-00044 R02

To avoid personal injury including electrical shock, severe burns and possible

death, all jewelry including bracelets, rings and watches must be removed prior to

installing or servicing this system.

Do not open or mutilate batteries. Opened or severely damaged batteries can

release toxic electrolyte which is harmful to the skin and eyes.

Never lay loose cables, metal parts or tools on top of batteries.

Under certain conditions, batteries can vent potentially explosive gas (hydrogen).

Never enclose batteries or battery cabinets in a sealed room.

BC11 BATTERY CABINET

8/27/2013 10 755-00044 R02

4. INSPECTION UPON RECEIPT OF GOODS

4.1 GENERAL

Special precautions and care have been taken to ensure the system arrives safe and undamaged.

However, upon receipt, you should inspect the entire shipment, including the crate and any boxes

for evidence of damage that may have occurred during transit.

4.2 VISIBLE DAMAGE

It is the responsibility of the person receiving the shipment to inventory and fully inspect all

materials against the bill of lading or weigh bill IMMEDIATELY while the carrier representative

is still present. Insure that all items are accounted for, including number of skids and quantity of

boxes. Also note any visible external damage that may have occurred during transit. Make all

applicable notations on the delivery receipt before signing and file a damage report with the

carrier.

4.3 CONCEALED DAMAGE

Within 3 to 30 days of receipt (depending on courier), unpack the system and check for any

concealed damage. Check the materials received against the detailed packing list to verify the

quantity and the condition as complete and satisfactory.

Note any damage to the internal packaging, then request an inspection by the carrier and file a

concealed damage claim. If there is a material shortage, contact a C&C Power representative at

the main office to file a claim.

Please contact your shipping company for all shipping damage.

C&C Power is not responsible for any shipping damage.

4.4 RETURN OF DAMAGED GOODS

Should equipment be damaged and require return to C&C Power for repair, a representative will

provide instructions along with an RMA number to expedite the return.

A RMA number must be obtained before returning equipment to C&C Power, Inc.

Inhaltsverzeichnis

Andere Mitsubishi Electric Gehäuse Handbücher

Mitsubishi Electric

Mitsubishi Electric BC7 Betriebsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung